RENESAS RD74HV1G32VSE

RD74HV1G34
High–Voltage Buffer gate
REJ03D0890-0100
Rev.1.00
Feb 20, 2007
Description
The RD74HV1G34 has one Buffer gate in a 5 pin package. Supports the wide power supply voltage and can use it for
the other use as a general–purpose driver.
Features
•
•
•
•
•
•
•
The basic gate function is lined up as Renesas uni logic series.
Supplied on emboss taping for high-speed automatic mounting.
Wide supply voltage range : 4.5 to 30 V
Operating temperature range : –40 to +85°C
All inputs VIH (Min.) = 3.5 V, VIL (Max.) = 0.8 V (@VCC = 10 V to 30 V)
Output current : IO short (Typ.) = ±70 mA (@VCC = 15 V)
Ordering Information
Part Name
RD74HV1G32VSE
Package Type
VSON-5 pin
Package Code
(Previous Code)
PUSN0005KA-A
(TNP-5DV)
Package
Abbreviation
VS
Taping Abbreviation
(Quantity)
E (3,000 pcs / Reel)
Outline and Article Indication
• RD74HV1G34
Marking
R 7
VSON-5
= Control code
These products designed for general and industrial use.
It is not supported for special quality or reliability demanded
use such as automotive or life support or something like that.
Rev.1.00 Feb 20, 2007 page 1 of 5
RD74HV1G34
Function Table
Input
H
L
Output
H
L
H : High level
L : Low level
Pin Arrangement
NC
1
IN
2
GND
3
5
VCC
4
OUT
(Top view)
Absolute Maximum Ratings
Item
Supply voltage range
Input voltage range *1
Output voltage range *1, 2
Input clamp current
Output clamp current
Continuous output current
Continuous current through
VCC or GND
Symbol
VCC
VI
VO
IIK
IOK
IO
Ratings
0 to 30
–0.5 to VCC + 0.5
–0.5 to VCC + 0.5
±50
±75
±100
Unit
V
V
V
mA
mA
mA
ICC or IGND
±100
mA
PT
200
mW
Tstg
–65 to 150
°C
Maximum power dissipation
*3
at Ta = 25°C (in still air)
Storage temperature
Notes:
Test Conditions
VI < 0 or VI > VCC
VO < 0 or VO > VCC
VO = 0 to VCC
The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two
of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 30 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.1.00 Feb 20, 2007 page 2 of 5
RD74HV1G34
Recommended Operating Conditions
Item
Supply voltage range
Input voltage range
Input / Output voltage range
Symbol
VCC
VI
VI/O
Input transition rise or fall rate
∆t / ∆v
Min
4.5
0
0
—
—
—
—
—
—
—
—
0
0
Operating free-air temperature
Ta
0
–40
IOH
Output current
IOL
Max
30
VCC
VCC
–2.5
–5
–10
–15
2.5
5
10
15
100
20
Unit
V
V
V
Conditions
ns / V
10
85
°C
VCC = 10 V
VCC = 15 V
VCC = 25 V
VCC = 30 V
VCC = 10 V
VCC = 15 V
VCC = 25 V
VCC = 30 V
VCC < 5 V
15 V > VCC ≥ 5 V
30 V ≥ VCC ≥ 15 V
mA
Note: Unused or floating inputs must be held high or low.
Electrical Characteristic
Ta = –40 to 85°C
Item
Symbol
VIH
Input voltage
VIL
VOH
Output voltage
VOL
Output current
Input current
Quiescent supply current
Supply current
Input capacitance
IOH short
IOL short
IIN
ICC
ISUPP
CIN
VCC (V) *
10
15
25
30
105
15
25
30
10
15
25
30
Min
3.5
3.5
3.5
3.5
—
—
—
—
9.0
13.5
22.5
27.0
Typ
—
—
—
—
—
—
—
—
—
—
—
—
Max
—
—
—
—
0.8
0.8
0.8
0.8
—
—
—
—
10
15
25
30
—
—
—
—
—
—
—
—
1.0
1.5
2.5
3.0
15
15
VCC
10
15
25
30
10
30
VCC
–46
46
—
—
—
—
—
—
—
—
–70
70
—
—
—
—
—
—
—
2.5
–95
95
±1
0.5
1.0
2.0
2.0
1
5
—
Unit
Test condition
V
µA
IOH = –2.5 mA
IOH = –5 mA
IOH = –10 mA
IOH = –15 mA
IOL = 2.5 mA
IOL = 5 mA
IOL = 10 mA
IOL = 15 mA
VO = 0V
VO = VCC
VIN = VCC or GND
µA
VIN = VCC or GND
V
mA
mA
pF
VCC = 10 V , VIN = 4.5 V
VCC = 30 V , VIN = 4.5 V
VIN = VCC or GND
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.1.00 Feb 20, 2007 page 3 of 5
RD74HV1G34
Switching Characteristics
(CL = 50 pF , tr = tf = 5 ns)
Item
Symbol
Propagation delay time
Output rise / fall time
Vcc (V)
tPLH
tPHL
tTLH
tTHL
Min
Ta = –40 to 85°C
Typ
Max
10
15
—
70
15
10
—
50
20
10
—
40
25
10
—
35
30
9
—
35
10
8
—
30
15
7
—
25
20
6
—
20
25
5
—
17
30
5
—
15
Unit
FROM
(Input)
TO
(Output)
ns
IN
OUT
ns
IN
OUT
Test Circuit
VCC
Pulse
Generator
Z out = 50 Ω
Output
Input
CL = 50 pF
RL = 10 MΩ
Note: CL includes probe and jig capacitance.
• Waveforms
tf
tr
90 %
50 %
Input
5V
90 %
50 %
10 %
10 %
tTLH
tTHL
90 %
Output
50 %
VOH
90 %
50 %
10 %
10 %
t PLH
0V
t PHL
Note: Input waveform : PRR = 1 MHz, duty cycle 50 %, tr ≤ 5 ns, tf ≤ 5 ns
Rev.1.00 Feb 20, 2007 page 4 of 5
VOL
RD74HV1G34
Package Dimensions
JEITA Package Code
P-USON5-1.2x1.6-0.50
RENESAS Code
PUSN0005KA-A
Previous Code
TNP-5D/TNP-5DV
MASS[Typ.]
0.002g
D
L1
1.0 ±0.1
4
( 0.1 )
HE
E
( 0.1 )
5
1
3
A
c
e
Rev.1.00 Feb 20, 2007 page 5 of 5
b
Reference Dimension in Millimeters
Symbol
D
E
A
A1
A2
b
b1
e
Lp
x
y
ZD
c
c1
HE
L1
Min Nom Max
1.55 1.6 1.65
1.1 1.2 1.3
0.6
0.15
0.2
0.3
0.5
0.07 0.12 0.22
1.55
1.6
0.2
1.65
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0