Part Number: www.SunLED.com ZFMYK10C2 SURFACE MOUNT DISPLAY Features ●0.4INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●I.C. COMPATIBLE. ●MECHANICALLY RUGGED. ●GRAY FACE,WHITE SEGMENT. ●PACKAGE:250PCS/REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. MYK Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. Operating Characteristics (TA=25°C) 3.Specifications are subject to change without notice. 4.The gap between the reflector and PCB shall not exceed 0.25mm. Absolute Maximum Ratings (TA=25°C) V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=10mA) λP 590 nm Wavelength of Dominant Emission (Typ.) (IF=10mA) λD 590 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 175 mA Power Dissipation PT 75 Operating Temperature TA -40 ~ +85 mW °C Yellow Published Date : FEB 29, 2008 V 2.5 Forward Current ZFMYK10C2 1.95 VF V Emitting Color VF Forward Voltage (Max.) (IF=10mA) 5 Part Number Forward Voltage (Typ.) (IF=10mA) Unit VR Tstg Unit MYK (InGaAlP) Reverse Voltage Storage Temperature MYK (InGaAlP) -40 ~ +85 Emitting Material InGaAlP Luminous Intensity (IF=10mA) ucd min. typ. 12000 48990 Drawing No : SDSA5362 Wavelength nm λP Description 590 Common Cathode. Rt. Hand Decimal V5 Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFMYK10C2 SURFACE MOUNT DISPLAY MYK Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 29, 2008 Drawing No : SDSA5362 V5 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFMYK10C2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Tape Specification (Units : mm) Published Date : FEB 29, 2008 Drawing No : SDSA5362 V5 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : FEB 29, 2008 ZFMYK10C2 ZFMYK10C2 Drawing No : SDSA5362 V5 Checked : Shin Chi P.4/4