Part Number: www.SunLED.com ZTHI55W-3 3.2x1.6mm INFRARED EMITTING DIODE Features ●3.2mmx1.6mm SMT LED,1.8mm THICKNESS. ●MECHANICALLY AND SPECTRALLY MATCHED TO THE PHOTOTRANSISTOR. ●WATER CLEAR LENS ●PACKAGE: 2000PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 3. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) THI (GaAlAs) Unit Reverse Voltage VR 5 V Forward Current IF 50 mA Forward Current (Peak) 1/100 Duty Cycle 10us Pulse Width iFS 1.2 A Power Dissipation PT 80 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZTHI55W-3 Emitting Material GaAlAs Published Date : FEB 28,2008 °C Lens-color Water Clear Drawing No : SDSA3655 Operating Characteristics (TA=25°C) THI (GaAlAs) Unit Forward Voltage (Typ.) (IF=20mA) VF 1.3 V Forward Voltage (Max.) (IF=20mA) VF 1.6 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 880 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 50 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 90 pF Luminous Intensity (Po=Mw/sr) @20mA min. typ. 1.6 3 V4 Wavelength nm λP Viewing Angle 2 θ 1/2 880 50° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com ZTHI55W-3 3.2x1.6mm INFRARED EMITTING DIODE THI Published Date : FEB 28,2008 Drawing No : SDSA3655 V4 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com ZTHI55W-3 3.2x1.6mm INFRARED EMITTING DIODE Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage or radiant intensity / luminous flux), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity / Luminous Flux: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters Published Date : FEB 28,2008 Drawing No : SDSA3655 V4 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com ZTHI55W-3 3.2x1.6mm INFRARED EMITTING DIODE PACKING & LABEL SPECIFICATIONS Published Date : FEB 28,2008 Drawing No : SDSA3655 ZTHI55W-3 V4 Checked : B.L.LIU P.4/4