PHILIPS 74AUP1G18GM

74AUP1G18
Low-power 1-of-2 demultiplexer with 3-state deselected
output
Rev. 02 — 3 April 2008
Product data sheet
1. General description
The 74AUP1G18 is a high-performance, low-power, low-voltage, Si-gate CMOS device,
superior to most advanced CMOS compatible TTL families.
Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall
times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low
static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.
This device is fully specified for partial Power-down applications using IOFF.
The IOFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
The 74AUP1G18 provides a 1-of-2 non-inverting demultiplexer with 3-state output. The
74AUP1G18 buffers the data on input pin (A) and passes it either to output 1Y or 2Y,
depending on whether the state of the select input pin (S) is LOW or HIGH.
2. Features
n Wide supply voltage range from 0.8 V to 3.6 V
n High noise immunity
n Complies with JEDEC standards:
u JESD8-12 (0.8 V to 1.3 V)
u JESD8-11 (0.9 V to 1.65 V)
u JESD8-7 (1.2 V to 1.95 V)
u JESD8-5 (1.8 V to 2.7 V)
u JESD8-B (2.7 V to 3.6 V)
n ESD protection:
u HBM JESD22-A114E Class 3A exceeds 5000 V
u MM JESD22-A115-A exceeds 200 V
u CDM JESD22-C101C exceeds 1000 V
n Low static power consumption; ICC = 0.9 µA (maximum)
n Latch-up performance exceeds 100 mA per JESD 78 Class II
n Inputs accept voltages up to 3.6 V
n Low noise overshoot and undershoot < 10 % of VCC
n IOFF circuitry provides partial Power-down mode operation
n Multiple package options
n Specified from −40 °C to +85 °C and −40 °C to +125 °C
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
3. Ordering information
Table 1.
Ordering information
Type number
Package
Temperature range Name
Description
Version
74AUP1G18GW
−40 °C to +125 °C
SC-88
plastic surface-mounted package; 6 leads
SOT363
74AUP1G18GM
−40 °C to +125 °C
XSON6
plastic extremely thin small outline package; no leads; SOT886
6 terminals; body 1 × 1.45 × 0.5 mm
74AUP1G18GF
−40 °C to +125 °C
XSON6
plastic extremely thin small outline package; no leads; SOT891
6 terminals; body 1 × 1 × 0.5 mm
4. Marking
Table 2.
Marking
Type number
Marking code
74AUP1G18GW
pW
74AUP1G18GM
pW
74AUP1G18GF
pW
5. Functional diagram
1Y
1
3
6
S
A
2Y
4
mnb088
Fig 1. Logic symbol
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
2 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
6. Pinning information
6.1 Pinning
74AUP1G18
74AUP1G18
S
1
6
S
1
6
1Y
GND
2
5
VCC
1Y
GND
2
5
VCC
A
3
4
2Y
A
3
4
2Y
74AUP1G18
S
1
6
1Y
GND
2
5
VCC
A
3
4
2Y
001aad869
001aad870
Transparent top view
Transparent top view
001aae822
Fig 2. Pin configuration SOT363
(SC-88)
Fig 3. Pin configuration SOT886
(XSON6)
Fig 4. Pin configuration SOT891
(XSON6)
6.2 Pin description
Table 3.
Pin description
Symbol
Pin
Description
S
1
data select
GND
2
ground (0 V)
A
3
data input
2Y
4
data output
VCC
5
supply voltage
1Y
6
data output
7. Functional description
Table 4.
Function table[1]
Input
Output
S
A
1Y
2Y
L
L
L
Z
L
H
H
Z
H
L
Z
L
H
H
Z
H
[1]
H = HIGH voltage level;
L = LOW voltage level;
Z = high-impedance OFF-state.
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
3 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
8. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
VCC
supply voltage
Conditions
IIK
input clamping current
VI
input voltage
VI < 0 V
IOK
output clamping current VO > VCC or VO < 0 V
[1]
VO
output voltage
Active mode and Power-down mode
VO = 0 V to VCC
[1]
Min
Max
Unit
−0.5
+4.6
V
−50
-
mA
−0.5
+4.6
V
-
±50
mA
−0.5
+4.6
V
IO
output current
-
±20
mA
ICC
supply current
-
50
mA
IGND
ground current
−50
-
mA
Tstg
storage temperature
−65
+150
°C
-
250
mW
total power dissipation
Ptot
Tamb = −40 °C to +125 °C
[2]
[1]
The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2]
For SC-88 packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.
For XSON6 packages: above 45 °C the value of Ptot derates linearly with 2.4 mW/K.
9. Recommended operating conditions
Table 6.
Recommended operating conditions
Symbol
Parameter
VCC
supply voltage
VI
input voltage
VO
output voltage
Tamb
ambient temperature
∆t/∆V
input transition rise and fall rate
Conditions
Max
Unit
0.8
3.6
V
0
3.6
V
Active mode
0
VCC
V
Power-down mode; VCC = 0 V
0
3.6
V
−40
+125
°C
0
200
ns/V
VCC = 0.8 V to 3.6 V
74AUP1G18_2
Product data sheet
Min
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
4 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
10. Static characteristics
Table 7.
Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Typ
Max
Unit
Tamb = 25 °C
VIH
VIL
VOH
VOL
HIGH-level input voltage
LOW-level input voltage
HIGH-level output voltage
LOW-level output voltage
VCC = 0.8 V
0.70 × VCC -
-
V
VCC = 0.9 V to 1.95 V
0.65 × VCC -
-
V
VCC = 2.3 V to 2.7 V
1.6
-
-
V
VCC = 3.0 V to 3.6 V
2.0
-
-
V
VCC = 0.8 V
-
-
0.30 × VCC V
VCC = 0.9 V to 1.95 V
-
-
0.35 × VCC V
VCC = 2.3 V to 2.7 V
-
-
0.7
V
VCC = 3.0 V to 3.6 V
-
-
0.9
V
IO = −20 µA; VCC = 0.8 V to 3.6 V
VCC − 0.1
-
-
V
IO = −1.1 mA; VCC = 1.1 V
0.75 × VCC -
-
V
IO = −1.7 mA; VCC = 1.4 V
1.11
-
V
VI = VIH or VIL
-
IO = −1.9 mA; VCC = 1.65 V
1.32
-
-
V
IO = −2.3 mA; VCC = 2.3 V
2.05
-
-
V
IO = −3.1 mA; VCC = 2.3 V
1.9
-
-
V
IO = −2.7 mA; VCC = 3.0 V
2.72
-
-
V
IO = −4.0 mA; VCC = 3.0 V
2.6
-
-
V
IO = 20 µA; VCC = 0.8 V to 3.6 V
-
-
0.1
V
IO = 1.1 mA; VCC = 1.1 V
-
-
0.3 × VCC
V
VI = VIH or VIL
IO = 1.7 mA; VCC = 1.4 V
-
-
0.31
V
IO = 1.9 mA; VCC = 1.65 V
-
-
0.31
V
IO = 2.3 mA; VCC = 2.3 V
-
-
0.31
V
IO = 3.1 mA; VCC = 2.3 V
-
-
0.44
V
IO = 2.7 mA; VCC = 3.0 V
-
-
0.31
V
IO = 4.0 mA; VCC = 3.0 V
-
-
0.44
V
II
input leakage current
VI = GND to 3.6 V; VCC = 0 V to 3.6 V
-
-
±0.1
µA
IOZ
OFF-state output current
VI = VIH or VIL; VO = 0 V to 3.6 V;
VCC = 0 V to 3.6 V
-
-
±0.1
µA
IOFF
power-off leakage current
VI or VO = 0 V to 3.6 V; VCC = 0 V
-
-
±0.2
µA
∆IOFF
additional power-off
leakage current
VI or VO = 0 V to 3.6 V;
VCC = 0 V to 0.2 V
-
-
±0.2
µA
ICC
supply current
VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V
-
-
0.5
µA
∆ICC
additional supply current
VI = VCC − 0.6 V; IO = 0 A;
VCC = 3.3 V
-
-
40
µA
CI
input capacitance
VCC = 0 V to 3.6 V; VI = GND or VCC
-
0.8
-
pF
CO
output capacitance
VO = GND; VCC = 0 V
-
1.7
-
pF
74AUP1G18_2
Product data sheet
[1]
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
5 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
Table 7.
Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
VCC = 0.8 V
Typ
Max
Unit
0.70 × VCC -
-
V
VCC = 0.9 V to 1.95 V
0.65 × VCC -
-
V
VCC = 2.3 V to 2.7 V
1.6
-
-
V
VCC = 3.0 V to 3.6 V
2.0
-
-
V
VCC = 0.8 V
-
-
0.30 × VCC V
VCC = 0.9 V to 1.95 V
-
-
0.35 × VCC V
VCC = 2.3 V to 2.7 V
-
-
0.7
V
VCC = 3.0 V to 3.6 V
-
-
0.9
V
Tamb = −40 °C to +85 °C
VIH
VIL
VOH
VOL
HIGH-level input voltage
LOW-level input voltage
HIGH-level output voltage
LOW-level output voltage
VI = VIH or VIL
IO = −20 µA; VCC = 0.8 V to 3.6 V
VCC − 0.1
-
-
V
IO = −1.1 mA; VCC = 1.1 V
0.7 × VCC
-
-
V
IO = −1.7 mA; VCC = 1.4 V
1.03
-
-
V
IO = −1.9 mA; VCC = 1.65 V
1.30
-
-
V
IO = −2.3 mA; VCC = 2.3 V
1.97
-
-
V
IO = −3.1 mA; VCC = 2.3 V
1.85
-
-
V
IO = −2.7 mA; VCC = 3.0 V
2.67
-
-
V
IO = −4.0 mA; VCC = 3.0 V
2.55
-
-
V
IO = 20 µA; VCC = 0.8 V to 3.6 V
-
-
0.1
V
IO = 1.1 mA; VCC = 1.1 V
-
-
0.3 × VCC
V
IO = 1.7 mA; VCC = 1.4 V
-
-
0.37
V
VI = VIH or VIL
IO = 1.9 mA; VCC = 1.65 V
-
-
0.35
V
IO = 2.3 mA; VCC = 2.3 V
-
-
0.33
V
IO = 3.1 mA; VCC = 2.3 V
-
-
0.45
V
IO = 2.7 mA; VCC = 3.0 V
-
-
0.33
V
-
-
0.45
V
II
input leakage current
VI = GND to 3.6 V; VCC = 0 V to 3.6 V
IO = 4.0 mA; VCC = 3.0 V
-
-
±0.5
µA
IOZ
OFF-state output current
VI = VIH or VIL; VO = 0 V to 3.6 V;
VCC = 0 V to 3.6 V
-
-
±0.5
µA
IOFF
power-off leakage current
VI or VO = 0 V to 3.6 V; VCC = 0 V
-
-
±0.5
µA
∆IOFF
additional power-off
leakage current
VI or VO = 0 V to 3.6 V;
VCC = 0 V to 0.2 V
-
-
±0.6
µA
ICC
supply current
VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V
-
-
0.9
µA
∆ICC
additional supply current
VI = VCC − 0.6 V; IO = 0 A;
VCC = 3.3 V
-
-
50
µA
74AUP1G18_2
Product data sheet
[1]
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
6 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
Table 7.
Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
VCC = 0.8 V
Typ
Max
Unit
0.75 × VCC -
-
V
VCC = 0.9 V to 1.95 V
0.70 × VCC -
-
V
VCC = 2.3 V to 2.7 V
1.6
-
-
V
VCC = 3.0 V to 3.6 V
2.0
-
-
V
VCC = 0.8 V
-
-
0.25 × VCC V
VCC = 0.9 V to 1.95 V
-
-
0.30 × VCC V
VCC = 2.3 V to 2.7 V
-
-
0.7
V
VCC = 3.0 V to 3.6 V
-
-
0.9
V
Tamb = −40 °C to +125 °C
HIGH-level input voltage
VIH
LOW-level input voltage
VIL
VOH
HIGH-level output voltage
LOW-level output voltage
VOL
VI = VIH or VIL
IO = −20 µA; VCC = 0.8 V to 3.6 V
VCC − 0.11 -
-
V
IO = −1.1 mA; VCC = 1.1 V
0.6 × VCC
-
-
V
IO = −1.7 mA; VCC = 1.4 V
0.93
-
-
V
IO = −1.9 mA; VCC = 1.65 V
1.17
-
-
V
IO = −2.3 mA; VCC = 2.3 V
1.77
-
-
V
IO = −3.1 mA; VCC = 2.3 V
1.67
-
-
V
IO = −2.7 mA; VCC = 3.0 V
2.40
-
-
V
IO = −4.0 mA; VCC = 3.0 V
2.30
-
-
V
IO = 20 µA; VCC = 0.8 V to 3.6 V
-
-
0.11
V
IO = 1.1 mA; VCC = 1.1 V
-
-
0.33 × VCC V
IO = 1.7 mA; VCC = 1.4 V
-
-
0.41
VI = VIH or VIL
V
IO = 1.9 mA; VCC = 1.65 V
-
-
0.39
V
IO = 2.3 mA; VCC = 2.3 V
-
-
0.36
V
IO = 3.1 mA; VCC = 2.3 V
-
-
0.50
V
IO = 2.7 mA; VCC = 3.0 V
-
-
0.36
V
-
-
0.50
V
II
input leakage current
VI = GND to 3.6 V; VCC = 0 V to 3.6 V
IO = 4.0 mA; VCC = 3.0 V
-
-
±0.75
µA
IOZ
OFF-state output current
VI = VIH or VIL; VO = 0 V to 3.6 V;
VCC = 0 V to 3.6 V
-
-
±0.75
µA
IOFF
power-off leakage current
VI or VO = 0 V to 3.6 V; VCC = 0 V
-
-
±0.75
µA
∆IOFF
additional power-off
leakage current
VI or VO = 0 V to 3.6 V;
VCC = 0 V to 0.2 V
-
-
±0.75
µA
ICC
supply current
VI = GND or VCC; IO = 0 A;
VCC = 0.8 V to 3.6 V
-
-
1.4
µA
∆ICC
additional supply current
VI = VCC − 0.6 V; IO = 0 A;
VCC = 3.3 V
-
-
75
µA
[1]
[1]
One input at VCC − 0.6 V, other input at VCC or GND.
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
7 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
11. Dynamic characteristics
Table 8.
Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 7.
Symbol Parameter
25 °C
Conditions
−40 °C to +125 °C
Unit
Min
Typ[1]
Max
Min
Max
(85 °C)
Max
(125 °C)
-
20.4
-
-
-
-
VCC = 1.1 V to 1.3 V
2.7
5.6
10.6
2.4
10.7
10.7
ns
VCC = 1.4 V to 1.6 V
2.4
3.9
6.1
2.2
6.5
6.7
ns
VCC = 1.65 V to 1.95 V
1.8
3.1
4.7
1.6
5.3
5.6
ns
VCC = 2.3 V to 2.7 V
1.6
2.4
3.6
1.4
4.0
4.2
ns
1.4
2.2
3.1
1.2
3.4
3.5
ns
CL = 5 pF
tpd
[2]
propagation delay A to nY; see Figure 5
VCC = 0.8 V
VCC = 3.0 V to 3.6 V
ten
enable time
[3]
S to nY; see Figure 6
VCC = 0.8 V
disable time
-
46.1
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
3.1
5.6
9.7
2.9
10.1
11.1
ns
VCC = 1.4 V to 1.6 V
2.5
4.0
6.2
2.2
6.6
7.3
ns
VCC = 1.65 V to 1.95 V
2.1
3.3
5.1
1.8
5.5
6.1
ns
VCC = 2.3 V to 2.7 V
1.7
2.7
3.9
1.4
4.2
4.6
ns
1.5
2.4
3.5
1.2
3.7
4.1
ns
-
12.6
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
3.0
4.7
7.5
2.9
7.9
8.7
ns
VCC = 1.4 V to 1.6 V
2.3
3.5
5.2
2.2
5.5
6.1
ns
VCC = 3.0 V to 3.6 V
tdis
ns
[4]
S to nY; see Figure 6
VCC = 0.8 V
VCC = 1.65 V to 1.95 V
2.3
3.4
4.8
2.1
5.1
5.6
ns
VCC = 2.3 V to 2.7 V
1.7
2.5
3.6
1.5
3.9
4.3
ns
VCC = 3.0 V to 3.6 V
2.0
2.9
3.8
1.8
4.1
4.5
ns
-
23.9
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
2.9
6.4
12.2
2.9
12.3
12.3
ns
VCC = 1.4 V to 1.6 V
2.7
4.5
7.1
2.4
7.6
7.9
ns
CL = 10 pF
tpd
[2]
propagation delay A to nY; see Figure 5
VCC = 0.8 V
VCC = 1.65 V to 1.95 V
2.3
3.7
5.5
2.1
6.0
6.3
ns
VCC = 2.3 V to 2.7 V
1.9
3.0
4.2
1.8
4.6
4.9
ns
VCC = 3.0 V to 3.6 V
1.8
2.7
3.9
1.6
4.1
4.3
ns
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
8 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
Table 8.
Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 7.
Symbol Parameter
ten
enable time
25 °C
Conditions
Max
Min
Max
(85 °C)
Max
(125 °C)
-
50.1
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
3.6
6.5
11.1
3.3
11.6
12.8
ns
VCC = 1.4 V to 1.6 V
2.9
4.6
7.0
2.6
7.6
8.4
ns
[3]
S to nY; see Figure 6
VCC = 1.65 V to 1.95 V
2.5
3.9
5.8
2.2
6.3
6.9
ns
VCC = 2.3 V to 2.7 V
2.1
3.2
4.6
1.7
4.9
5.4
ns
2.0
2.9
4.2
1.6
4.4
4.8
ns
VCC = 3.0 V to 3.6 V
disable time
Unit
Min
VCC = 0.8 V
tdis
−40 °C to +125 °C
Typ[1]
[4]
S to nY; see Figure 6
VCC = 0.8 V
-
14.5
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
4.1
5.8
8.7
3.9
9.1
10.0
ns
VCC = 1.4 V to 1.6 V
3.2
4.4
6.1
3.0
6.5
7.2
ns
VCC = 1.65 V to 1.95 V
3.3
4.5
6.0
3.2
6.3
6.9
ns
VCC = 2.3 V to 2.7 V
2.4
3.3
4.4
2.2
4.7
5.2
ns
VCC = 3.0 V to 3.6 V
3.1
4.1
5.2
3.0
5.5
6.1
ns
CL = 15 pF
tpd
[2]
propagation delay A to nY; see Figure 5
VCC = 0.8 V
ten
enable time
-
27.4
-
VCC = 1.1 V to 1.3 V
3.4
7.2
13.7
3.2
13.9
13.9
ns
VCC = 1.4 V to 1.6 V
3.2
5.0
7.9
2.8
8.7
9.1
ns
VCC = 1.65 V to 1.95 V
2.5
4.2
6.3
2.4
7.0
7.4
ns
VCC = 2.3 V to 2.7 V
2.3
3.4
4.9
2.2
5.3
5.7
ns
VCC = 3.0 V to 3.6 V
2.2
3.2
4.4
1.9
4.8
5.0
ns
-
53.9
-
VCC = 1.1 V to 1.3 V
4.1
7.3
12.4
3.6
12.9
14.2
ns
VCC = 1.4 V to 1.6 V
3.3
5.2
7.8
2.9
8.4
9.2
ns
VCC = 1.65 V to 1.95 V
2.9
4.4
6.4
2.5
7.0
7.7
ns
VCC = 2.3 V to 2.7 V
2.5
3.6
5.2
2.1
5.5
6.1
ns
2.3
3.4
4.8
1.9
4.9
5.4
ns
-
16.3
-
VCC = 1.1 V to 1.3 V
5.1
6.9
10.0
4.9
10.4
11.4
ns
VCC = 1.4 V to 1.6 V
4.0
5.3
7.1
3.8
7.4
8.1
ns
VCC = 1.65 V to 1.95 V
4.3
5.6
7.3
4.2
7.6
8.4
ns
VCC = 2.3 V to 2.7 V
3.1
4.1
5.3
3.0
5.6
6.2
ns
VCC = 3.0 V to 3.6 V
4.2
5.3
6.6
4.1
6.9
7.6
ns
[3]
S to nY; see Figure 6
VCC = 0.8 V
VCC = 3.0 V to 3.6 V
tdis
disable time
ns
[4]
S to nY; see Figure 6
VCC = 0.8 V
74AUP1G18_2
Product data sheet
ns
ns
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
9 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
Table 8.
Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 7.
Symbol Parameter
25 °C
Conditions
−40 °C to +125 °C
Unit
Min
Typ[1]
Max
Min
Max
(85 °C)
Max
(125 °C)
-
37.8
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
4.1
9.5
18.0
4.1
18.5
18.9
ns
VCC = 1.4 V to 1.6 V
3.7
6.6
10.4
3.8
11.5
12.1
ns
VCC = 1.65 V to 1.95 V
3.4
5.5
8.3
3.3
9.2
9.8
ns
VCC = 2.3 V to 2.7 V
3.2
4.5
6.3
3.0
6.8
7.3
ns
3.1
4.2
5.8
2.9
6.6
7.0
ns
-
66.3
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
5.3
9.6
16.4
4.7
17.0
18.7
ns
VCC = 1.4 V to 1.6 V
4.4
6.8
10.0
3.9
10.9
12.0
ns
CL = 30 pF
tpd
[2]
propagation delay A to nY; see Figure 5
VCC = 0.8 V
VCC = 3.0 V to 3.6 V
ten
enable time
[3]
S to nY; see Figure 6
VCC = 0.8 V
VCC = 1.65 V to 1.95 V
4.0
5.7
8.2
3.4
8.9
9.8
ns
VCC = 2.3 V to 2.7 V
3.4
4.8
6.6
2.9
7.0
7.7
ns
3.2
4.5
6.1
2.8
6.5
7.2
ns
VCC = 3.0 V to 3.6 V
tdis
disable time
[4]
S to nY; see Figure 6
VCC = 0.8 V
-
21.8
-
-
-
-
ns
VCC = 1.1 V to 1.3 V
8.2
10.4
14.3
8.0
14.7
16.2
ns
VCC = 1.4 V to 1.6 V
6.5
8.0
10.0
6.3
10.4
11.4
ns
VCC = 1.65 V to 1.95 V
7.4
9.0
11.0
7.3
11.3
12.4
ns
VCC = 2.3 V to 2.7 V
5.3
6.5
7.9
5.2
8.2
9.0
ns
VCC = 3.0 V to 3.6 V
7.6
9.0
10.7
7.4
11.0
12.1
ns
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
10 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
Table 8.
Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 7.
Symbol Parameter
25 °C
Conditions
−40 °C to +125 °C
Unit
Min
Typ[1]
Max
Min
Max
(85 °C)
Max
(125 °C)
VCC = 0.8 V
-
2.8
-
-
-
-
pF
VCC = 1.1 V to 1.3 V
-
2.9
-
-
-
-
pF
VCC = 1.4 V to 1.6 V
-
3.0
-
-
-
-
pF
VCC = 1.65 V to 1.95 V
-
3.2
-
-
-
-
pF
VCC = 2.3 V to 2.7 V
-
3.7
-
-
-
-
pF
VCC = 3.0 V to 3.6 V
-
4.2
-
-
-
-
pF
CL = 5 pF, 10 pF, 15 pF and 30 pF
power dissipation
capacitance
CPD
[5]
fi = 1 MHz;
VI = GND to VCC
[1]
All typical values are measured at nominal VCC.
[2]
tpd is the same as tPLH and tPHL.
[3]
ten is the same as tPZH and tPZL.
[4]
tdis is the same as tPHZ and tPLZ.
[5]
CPD is used to determine the dynamic power dissipation (PD in µW).
PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
Σ(CL × VCC2 × fo) = sum of the outputs.
12. Waveforms
VI
VM
VM
A input
GND
tPLH
tPHL
VOH
VM
nY output
VM
VOL
mnb089
Measurement points are given in Table 9.
Logic levels: VOL and VOH are typical output voltage drop that occur with the output load.
Fig 5. The data input (A) to output (nY) propagation delays
Table 9.
Measurement points
Supply voltage
Output
Input
VCC
VM
VM
VI
tr = tf
0.8 V to 3.6 V
0.5 × VCC
0.5 × VCC
VCC
≤ 3.0 ns
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
11 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
VI
S input
VM
GND
t PLZ
t PZL
VCC
nY output
LOW-to-OFF
OFF-to-LOW
VM
VX
VOL
t PZH
t PHZ
VOH
VY
nY output
HIGH-to-OFF
OFF-to-HIGH
VM
GND
output
enabled
output
enabled
output
disabled
mnb090
Measurement points are given in Table 10.
Logic levels: VOL and VOH are typical output voltage drop that occur with the output load.
Fig 6. Enable and disable times
Table 10.
Measurement points
Supply voltage
Input
Output
VCC
VM
VM
VX
VY
0.8 V to 1.6 V
0.5 × VCC
0.5 × VCC
VOL + 0.1 V
VOH − 0.1 V
1.65 V to 2.7 V
0.5 × VCC
0.5 × VCC
VOL + 0.15 V
VOH − 0.15 V
3.0 V to 3.6 V
0.5 × VCC
0.5 × VCC
VOL + 0.3 V
VOH − 0.3 V
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
12 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
VCC
VEXT
5 kΩ
G
VI
VO
DUT
RT
CL
RL
001aac521
Test data is given in Table 11.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to the output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig 7. Load circuitry for switching times
Table 11.
Test data
Supply voltage
Load
VEXT
VCC
CL
0.8 V to 3.6 V
5 pF, 10 pF, 15 pF and 30 pF 5 kΩ or 1 MΩ
[1]
RL
[1]
tPLH, tPHL
tPZH, tPHZ
tPZL, tPLZ
open
GND
2 × VCC
For measuring enable and disable times RL = 5 kΩ, for measuring propagation delays, setup and hold times and pulse width RL = 1 MΩ.
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
13 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
13. Package outline
Plastic surface-mounted package; 6 leads
SOT363
D
E
B
y
X
A
HE
6
5
v M A
4
Q
pin 1
index
A
A1
1
2
e1
3
bp
c
Lp
w M B
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
max
bp
c
D
E
e
e1
HE
Lp
Q
v
w
y
mm
1.1
0.8
0.1
0.30
0.20
0.25
0.10
2.2
1.8
1.35
1.15
1.3
0.65
2.2
2.0
0.45
0.15
0.25
0.15
0.2
0.2
0.1
OUTLINE
VERSION
REFERENCES
IEC
SOT363
JEDEC
JEITA
SC-88
EUROPEAN
PROJECTION
ISSUE DATE
04-11-08
06-03-16
Fig 8. Package outline SOT363 (SC-88)
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
14 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm
SOT886
b
1
2
3
4×
(2)
L
L1
e
6
5
e1
4
e1
6×
A
(2)
A1
D
E
terminal 1
index area
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A (1)
max
A1
max
b
D
E
e
e1
L
L1
mm
0.5
0.04
0.25
0.17
1.5
1.4
1.05
0.95
0.6
0.5
0.35
0.27
0.40
0.32
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
OUTLINE
VERSION
SOT886
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
04-07-15
04-07-22
MO-252
Fig 9. Package outline SOT886 (XSON6)
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
15 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm
1
SOT891
b
3
2
4×
(1)
L
L1
e
6
5
e1
4
e1
6×
A
(1)
A1
D
E
terminal 1
index area
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max
A1
max
b
D
E
e
e1
L
L1
mm
0.5
0.04
0.20
0.12
1.05
0.95
1.05
0.95
0.55
0.35
0.35
0.27
0.40
0.32
Note
1. Can be visible in some manufacturing processes.
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
05-04-06
07-05-15
SOT891
Fig 10. Package outline SOT891 (XSON6)
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
16 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
14. Abbreviations
Table 12.
Abbreviations
Acronym
Description
CDM
Charged Device Model
CMOS
Complementary Metal-Oxide Semiconductor
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
MM
Machine Model
TTL
Transistor-Transistor Logic
15. Revision history
Table 13.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
74AUP1G18_2
20080403
Product data sheet
-
74AUP1G18_1
Modifications:
•
Section 2 “Features”:
•
Section 10 “Static characteristics”:
Changed: ESD HBM voltage from 4000 V to 5000 V.
Changed: input capacitance.
•
Section 11 “Dynamic characteristics”:
Changed: propagation delays, enable times, disable times and typical power dissipation
capacitance.
74AUP1G18_1
20061013
Product data sheet
74AUP1G18_2
Product data sheet
-
-
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
17 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
16. Legal information
16.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
16.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
74AUP1G18_2
Product data sheet
© NXP B.V. 2008. All rights reserved.
Rev. 02 — 3 April 2008
18 of 19
74AUP1G18
NXP Semiconductors
Low-power 1-of-2 demultiplexer with 3-state deselected output
18. Contents
1
2
3
4
5
6
6.1
6.2
7
8
9
10
11
12
13
14
15
16
16.1
16.2
16.3
16.4
17
18
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
Functional description . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Recommended operating conditions. . . . . . . . 4
Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
Dynamic characteristics . . . . . . . . . . . . . . . . . . 8
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 14
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 17
Legal information. . . . . . . . . . . . . . . . . . . . . . . 18
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 18
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Contact information. . . . . . . . . . . . . . . . . . . . . 18
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2008.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 3 April 2008
Document identifier: 74AUP1G18_2