Oscilent Corporation IF SAW Filter | 807-SL300.0M-20 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 807-SL300.0M-20 7.0 x 5.0mm SMD Base Station & Repeater Apr 18, 2007 . TYPE : 300.00 MHz Filter Low Loss PART NUMBER : 807-SL300.0M-20 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 300.0 - MHz Insertion Loss - 10.30 15 dB Source Impedance (single ended)* - 50 - ohm Load Impedance (single ended)* - 50 - ohm Bandwidth -1.0 dB 20.0 21.95 - MHz Bandwidth -3.0 dB 21.0 23.55 - MHz Bandwidth -40.0 dB - - 31.0 MHz Amplitude Ripple (Fo +/- 2.5MHz) - 0.4 0.7 dBp-p Amplitude Ripple - 0.7 1.5 dBp-p Group Delay Variation - 65 120 nsec Group Delay Variation - 50 100 nsec Absolute Delay at Fo - 0.510 1.0 µsec - - - - Lower Sidelobe 40 - - dB Upper Sidelobe 40 - - dB Relative Attenuation Ambient Temperature - 25 - °C Temperature Coefficient - -94 - ppm/°C *Custom parameters available. Contact Oscilent Sales for discussion. . PACKAGE OUTLINE (mm) Oscilent Corporation IF SAW Filter | 807-SL300.0M-20 Page 2 of 2 TEST FIXTURE FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 807-SL300.0M-20