5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP ATTENTION AAA5060SYEVGEC OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features SUPER BRIGHT YELLOW GREEN Description CHIPS CAN BE CONTROLLED SEPARATELY. The Super Bright Yellow source color devices are made with SUITABLE FOR ALL SMT ASSEMBLY AND DH InGaAlP on GaAs substrate Light Emitting Diode. SOLDER PROCESS. The Green source color devices are made with InGaN AVAILABLE ON TAPE AND REEL. on SiC Light Emitting Diode. PACKAGE: 500PCS / REEL. Static electricity and surge damage the LEDS. RoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0906 REV NO: V.4 DATE: MAR/05/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000789 Selection Guide Part No. Dice Iv (mcd) @50mA*30 mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) AAA5060SYEVGEC Min. Typ. 280 500 *280 *600 Viewing Angle 2 θ 1/2 100° WATER CLEAR GREEN (InGaN) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 30mA. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Units Test Conditions 592 518 Max. nm IF=20mA λpeak Peak Wavelength Super Bright Yellow Green λD Dominant Wavelength Super Bright Yellow Green 590 525 nm IF=20mA ∆λ1/2 Spectral Line Half-width Super Bright Yellow Green 20 36 nm IF=20mA C Capacitance Super Bright Yellow Green 33 50 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow Green 2.0 3.5 2.5 4.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Green Units Power dissipation 125 135 mW DC Forward Current 50 30 mA Peak Forward Current [1] 200 150 mA 5 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0906 REV NO: V.4 DATE: MAR/05/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000789 AAA5060SYEVGEC Super Bright Yellow SPEC NO: DSAD0906 REV NO: V.4 DATE: MAR/05/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000789 Green SPEC NO: DSAD0906 REV NO: V.4 DATE: MAR/05/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000789 AAA5060SYEVGEC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD0906 REV NO: V.4 DATE: MAR/05/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201000789