KINGBRIGHT ACPSA04

SURFACE MOUNT DISPLAY
Part Number: ACPSA04-41SURKWA
Features
HYPER RED
Description
0.4 INCH CHARACTER HEIGHT.
The Hyper Red source color devices are made with DH
LOW CURRENT OPERATION.
InGaAlP on GaAs substrate Light Emitting Diode.
HIGH CONTRAST AND LIGHT OUTPUT.
EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
CATEGORIZED FOR LUMINOUS INTENSITY.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 400PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
RoHS COMPLIANT.
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3.The gap between the reflector and PCB shall not exceed 0.25mm
SPEC NO: DSAG4991
REV NO: V.1
DATE: MAY/30/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.W.WANG
ERP: 1361000049
Selection Guide
Part No.
Dice
ACPSA04-41SURKWA
Lens Type
HYPER RED (InGaAlP)
WHITE DIFFUSED
Iv (ucd) [1]
@ 10mA
Description
Min.
Typ.
4700
22800
Common Anode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Hyper Red
λD [1]
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
650
nm
IF=20mA
Hyper Red
635
nm
IF=20mA
Spectral Line Half-width
Hyper Red
28
nm
IF=20mA
C
Capacitance
Hyper Red
35
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
1.95
2.5
V
IF=20mA
IR
Reverse Current
Hyper Red
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
185
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG4991
REV NO: V.1
DATE: MAY/30/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.W.WANG
ERP: 1361000049
Hyper Red
ACPSA04-41SURKWA
SPEC NO: DSAG4991
REV NO: V.1
DATE: MAY/30/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.W.WANG
ERP: 1361000049
ACPSA04-41SURKWA
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG4991
REV NO: V.1
DATE: MAY/30/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.W.WANG
ERP: 1361000049
PACKING & LABEL SPECIFICATIONS
ACPSA04-41SURKWA
SPEC NO: DSAG4991
REV NO: V.1
DATE: MAY/30/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Joe Lee
DRAWN: Y.W.WANG
ERP: 1361000049