3.2mmx1.6mm SMD CHIP LED LAMP Part Number: APT3216WG1C Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED, 0.75mm thickness. The Green source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package : 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL5942 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 1 OF 5 ERP: 1203011533 Selection Guide Part No. Dice APT3216WG1C Iv (mcd) [2] @ 20mA Lens Type Green (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 120 300 120° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 500 nm IF=20mA Green 505 nm IF=20mA Spectral Line Half-width Green 28 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 3.8 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 95 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAL5942 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 2 OF 5 ERP: 1203011533 Green APT3216WG1C SPEC NO: DSAL5942 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 3 OF 5 ERP: 1203011533 APT3216WG1C Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAL5942 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 4 OF 5 ERP: 1203011533 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAL5942 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu APT3216WG1C DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 5 OF 5 ERP: 1203011533