ARIZONA MICROTEK, INC. AZ10ELT22 AZ100ELT22 CMOS/TTL to Differential PECL Translator PACKAGE AVAILABILITY FEATURES PACKAGE • Green / RoHS Compliant / Lead (Pb) Free package available • 0.5ns Typical Propagation Delay • <100ps Typical Output to Output Skew • Differential PECL Outputs • Flow Through Pinouts • Operating Range of 3.0V to 5.5V • Direct Replacement for ON Semiconductor MC10ELT22 & MC100ELT22 • IBIS Model Files Available on Arizona Microtek Website DESCRIPTION PART NUMBER MARKING NOTES 1,2,4 SOIC 8 AZ10ELT22D AZM10 ELT22 SOIC 8 RoHS Compliant / Lead (Pb) Free AZ10ELT22D+ AZM10+ ELT22 1,2,4 SOIC 8 AZ100ELT22D AZM100 ELT22 1,2,4 SOIC 8 RoHS Compliant / Lead (Pb) Free AZ100ELT22D+ AZM100+ ELT22 1,2,4 TSSOP 8 AZ10ELT22T AZT LT22 1,2,4 TSSOP 8 RoHS Compliant / Lead (Pb) Free AZ10ELT22T+ AZT+ LT22 1,2,4 TSSOP 8 AZ100ELT22T AZH LT22 1,2,4 TSSOP 8 RoHS Compliant / Lead (Pb) Free AZ100ELT22T+ AZH+ LT22 1,2,4 1 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date code format: “Y” or “YY” for year followed by “WW” for week. Parts marked JNB for date codes prior to 4WW (prior to 2004). Date code “YWW” or “YYWW” on underside of part. 2 The AZ10/100ELT22 is a dual 3 CMOS/TTL to differential PECL 4 translator. Because PECL (Positive ECL) levels are used, only VCC and ground are required. The small outline packaging and the low skew, dual gate design of the ELT22 makes it ideal for applications that require the translation of a clock and a data signal. The ELT22 is available in both PECL standards: the 10ELT is compatible with PECL 10K logic levels while the 100ELT is compatible with PECL 100K logic levels. NOTE: Specifications in PECL tables are valid when thermal equilibrium is established. LOGIC DIAGRAM AND PINOUT PIN DESCRIPTION PIN Q0, Q0 ¯¯ , Q1, Q1 ¯¯ D0, D1 VCC GND FUNCTION Differential PECL Outputs CMOS/TTL Input Positive Supply Ground 1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (480) 890-2541 www.azmicrotek.com AZ10ELT22 AZ100ELT22 Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol VCC VIN IOUT TA TSTG Characteristic DC Supply Voltage (Referenced to GND) Input Voltage Current Applied to Output in Low Output State Value 8.0 0 to 6.0 50 100 -40 to +85 -65 to +150 ---Continuous ---Surge Operating Temperature Range (In Free-Air) Storage Temperature Range Unit V V mA °C °C TTL/CMOS INPUT DC CHARACTERISTICS (GND = 0.0V, VCC = +3.0V to +5.5V) Symbol IIH IIH IIL VIK VIH VIL Characteristic Input HIGH Current Input HIGH Current Input LOW Current Input Clamp Diode Voltage Input HIGH Voltage Input LOW Voltage Min Typ Max 15 20 -0.1 -1.2 Unit μA μA mA V V V 2.0 0.8 Condition VIN = 2.7V VIN = VCC VIN = 0.5V IIN = -18mA 10K LVPECL DC Characteristics GND = 0.0V, VCC = +3.3V) Symbol Characteristic 1,2 Min 2170 1350 -40°C Typ Max 2410 1685 24 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 ICC Power Supply Current3 1. Output parameters vary 1:1 with VCC. 2. Each output is terminated through a 50Ω resistor to VCC – 2V. 3. ICC is measured with outputs open. Min 2245 1350 0°C Typ Max 2460 1670 24 Min 2295 1350 25°C Typ 2400 1550 Max 4160 3370 24 Min 3995 3050 25°C Typ 4100 3250 Max 2420 1680 24 Min 2235 1490 25°C Typ 2345 1595 Max 4120 3380 24 Min 3935 3190 25°C Typ 4045 3295 Max 2490 1670 24 Min 2390 1350 Max 4190 3370 24 Min 4090 3050 Max 2420 1680 24 Min 2255 1490 Max 4120 3380 24 Min 3955 3190 85°C Typ Max 2580 1705 25 Unit mV mV mA 10K PECL DC Characteristics (GND = 0.0V, VCC = +5.0V) Symbol Characteristic 1,2 Min 3870 3050 -40°C Typ Max 4110 3385 24 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 ICC Power Supply Current3 1. Output parameters vary 1:1 with VCC. 2. Each output is terminated through a 50Ω resistor to VCC – 2V. 3. ICC is measured with outputs open. Min 3945 3050 0°C Typ 85°C Typ Max 4280 3405 25 Unit mV mV mA 100K LVPECL DC Characteristics (GND = 0.0V, VCC = +3.3V) Symbol Characteristic 1,2 Min 2160 1470 -40°C Typ Max 2420 1745 24 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 ICC Power Supply Current3 1. Output parameters vary 1:1 with VCC. 2. Each output is terminated through a 50Ω resistor to VCC – 2V. 3. ICC is measured with outputs open. Min 2205 1490 0°C Typ 85°C Typ Max 2420 1680 25 Unit mV mV mA 100K PECL DC Characteristics (GND = 0.0V, VCC = +5.0V) Symbol Characteristic 1,2 Min 3860 3170 -40°C Typ Max 4120 3445 24 VOH Output HIGH Voltage VOL Output LOW Voltage1,2 ICC Power Supply Current3 1. Output parameters vary 1:1 with VCC. 2. Each output is terminated through a 50Ω resistor to VCC – 2V. 3. ICC is measured with outputs open. April 2007 * REV - 7 Min 3905 3190 0°C Typ www.azmicrotek.com 2 85°C Typ Max 4120 3380 25 Unit mV mV mA AZ10ELT22 AZ100ELT22 AC Characteristics (GND = 0.0V, VCC = +3.0V to +5.5V) -400C Unit 0°C 25°C 85°C Min Max Min Max Min Typ Max Min Max Propagation Delay1 0.2 0.7 0.2 0.7 0.2 0.4 0.7 0.2 0.7 ns Propagation Delay1 0.2 0.7 0.2 0.7 0.2 0.4 0.7 0.2 0.7 ns Output Rise/Fall Time 0.25 0.7 0.25 0.7 0.25 0.7 0.25 0.7 ns Maximum Frequency2 350 350 350 350 MHz Maximum Frequency3 670 800 800 800 MHz Propagation delay is measured from +1.5V on the input to 50% of the PECL output swing. Input rise/fall times are < 1ns/V. Full swing PECL output. Output at –3 dB. Symbol Large Signal Performance 850 750 Single ended Output (mV p-p) tPLH tPHL tr/tf fMAX fMAX 1. 2. 3. Characteristic 650 550 450 Input: 150 mV p-p Sine Wave Single Ended 350 250 150 1 10 100 Frequency (MHz) April 2007 * REV - 7 www.azmicrotek.com 3 1000 10000 Condition 20-80% AZ10ELT22 AZ100ELT22 PACKAGE DIAGRAM SOIC 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. April 2007 * REV - 7 DIM A A1 A2 A3 bp c D E e HE L Lp Q v w y Z θ www.azmicrotek.com 4 MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 1.28 1.57 0.25 0.36 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 5.80 6.20 1.05 0.40 1.27 0.60 0.70 0.25 0.25 0.10 0.30 0.70 8O 0O INCHES MIN MAX .053 0.069 0.004 0.010 0.050 0.062 0.01 0.014 0.019 0.0075 0.0100 0.19 0.20 0.15 0.16 0.050 0.228 0.244 0.041 0.016 0.050 0.024 0.028 0.01 0.01 0.004 0.012 0.028 0O 8O AZ10ELT22 AZ100ELT22 PACKAGE DIAGRAM TSSOP 8 DIM A A1 A2 A3 bp c D E e HE L Lp v w y Z θ NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. April 2007 * REV - 7 www.azmicrotek.com 5 MILLIMETERS MIN MAX 1.10 0.05 0.15 0.75 0.95 0.25 0.22 0.40 0.13 0.23 2.90 3.10 2.90 3.10 0.65 4.75 5.05 0.95 0.40 0.70 0.10 0.08 0.10 0.38 0.64 6O 0O AZ10ELT22 AZ100ELT22 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. April 2007 * REV - 7 www.azmicrotek.com 6