BAX16 High Voltage General Purpose Diode DO-35 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings Symbol V RRM * T a = 25°C unless otherwise noted Parameter Value Unit 150 V Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current 200 mA if Recurrent Peak Forward Current 600 mA IFSM Non-repetitive Peak Forward Surge Current Pulse Width = 1.0 s Pulse Width = 1.0 ms 1 4 A A TSTG Storage Temperature Range -65 to 200 °C TJ Operating Junction Temperature 175 °C * These ratings are limiting values above which the serviceability of the diode may be impaired. Notes: 1) These ratings are based on a maximum junction temperature of 200degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Electrical Characteristics Symbol * Ta = 25°C unless otherwise noted Parameter Conditions Min. Max. Units V VR Breakdown Voltage IR = 100mA VF Forward Voltage IF = 1.0mA 0.65 V FP Forward Voltage Pulse Width = 300ms IF = 100mA IF = 200mA 1.3 1.5 IR Reverse Leakage VR = 50V VR = 50V, TA = 150°C VR = 150V VR = 150V, TA = 150°C 25 25 100 100 nA mA nA mA trr Reverse Recovery Time IF = 30mA, IR = 30mA, Irr = 1.0mA, RL = 100W 120 ns © 2007 Fairchild Semiconductor Corporation BAX16 Rev. 1.0.0 180 V www.fairchildsemi.com 1 BAX16 — High Voltage General Purpose Diode April 2008 BAX16 — High Voltage General Purpose Diode Typical Performance Characteristics © 2007 Fairchild Semiconductor Corporation BAX16 Rev. 1.0.0 www.fairchildsemi.com 2 BAX16 — High Voltage General Purpose Diode Typical Performance Characteristics © 2007 Fairchild Semiconductor Corporation BAX16 Rev. 1.0.0 www.fairchildsemi.com 3 The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM ® PDP-SPM™ Power220® SuperSOT™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I31 © 2007 Fairchild Semiconductor Corporation BAX16 Rev. 1.0.0 www.fairchildsemi.com 4 BAX16 High Voltage General Purpose Diode TRADEMARKS