SHANGHAI SUNRISE ELECTRONICS CO., L RS2A THRU RS2M SURFACE MOUNT FAST SWITCHING RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 2.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • Glass passivated chip • Fast recovery for high efficiency • High temperature soldering guaranteed: 260oC/10sec/at terminal MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode SMB/DO-214AA B A C D F G A B MAX. .155(3.94) .180(4.57) MIN. .130(3.30) .160(4.06) E F MAX. .220(5.59) .096(2.44) MIN. .205(5.21) .084(2.13) H C D .083(2.11) .012(0.305 .077(1.96) .006(0.152 G H .008(0.203) .060(1.52 .004(0.102) .030(0.76 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RS RS RS RS RS RS RS RATINGS SYMBOL 2A 2B 2D 2G 2J 2K 2M VRRM Maximum Repetitive Peak Reverse Voltage 50 100 200 400 600 800 1000 VRMS Maximum RMS Voltage 35 70 140 280 420 560 700 VDC Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Current IF(AV) 2.0 (TL=110oC) Peak Forward Surge Current (8.3ms single IFSM 50 half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage VF 1.3 (at rated forward current) 5.0 Maximum DC Reverse Current Ta=25oC IR o 200 (at rated DC blocking voltage) Ta=125 C 150 500 Maximum Reverse Recovery Time (Note 1) trr 250 30 CJ Typical Junction Capacitance (Note 2) 16 R Typical Thermal Resistance (Note 3) θ(ja) -50 to +150 TSTG,TJ Storage and Operation Junction Temperature Note: 1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A. 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area http://www.sse-diode LTD. TECHNICAL SPECIFICATION SMB/DO-214AA A B MAX. .155(3.94) .180(4.57) MIN. .130(3.30) .160(4.06) E F MAX. .220(5.59) .096(2.44) MIN. .205(5.21) .084(2.13) C D .083(2.11) .012(0.305) .077(1.96) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) Dimensions in inches and (millimeters) r UNITS V V V A A V µA µA nS pF o C/W o C de.com