TIGER ELECTRONIC CO.,LTD S1A THRU S1M SURFACE MOUNT GLASS PASSIVATED RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000VCURRENT: 1.0A FEATURES SMA/DO-214AC B • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • High temperature soldering guaranteed: C A D 260oC/10sec/at terminal F H G MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode A B MAX. .110(2.79) .177(4.50) MIN. .100(2.54) .157(3.99) E F MAX. .208(5.28) .090(2.29) MIN. .194(4.93) .078(1.98) C D .058(1.47) .012(0.305) .052(1.32) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL S1A S1B S1D S1G S1J S1K S1M UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current (TL=100oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current (at rated DC blocking voltage) Typical Junction Capacitance Typical Thermal Resistance o Ta=25 C o Ta=125 C (Note 1) (Note 2) IF(AV) 1.0 A IFSM 30 A VF 1.1 V IR 5.0 200 µA CJ 15 Rθ(ja) 30 TSTG,TJ -65 to +150 Storage and Operation Junction Temperature Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area µA pF o C/W o C