SHANGHAI SUNRISE ELECTRONICS CO., L S1AB THRU S1MB SURFACE MOUNT GLASS PASSIVATED RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURES SMB/DO-214AA B • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • High temperature soldering guaranteed: 260oC/10sec/at terminal C A D F H G MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode A B MAX. .155(3.94) .180(4.57) MIN. .130(3.30) .160(4.06) E F MAX. .220(5.59) .096(2.44) MIN. .205(5.21) .084(2.13) C D .083(2.11) .012(0.30 .077(1.96) .006(0.15 G H .008(0.203) .060(1.52 .004(0.102) .030(0.76 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave,60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive derate current by 20%) RATINGS SYMBOL S1AB S1BB S1DB S1GB S1JB S1KB S1MB Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (TL=100oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current Ta=25oC o VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 IF(AV) 1.0 IFSM 30 VF 1.1 IR 600 420 600 800 560 800 1000 700 1000 5.0 200 Ta=125 C 15 CJ Typical Junction Capacitance (Note 1) 30 Typical Thermal Resistance (Note 2) Rθ(ja) -65 to +150 Storage and Operation Junction Temperature TSTG,TJ Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area (at rated DC blocking voltage) http://www.sse-diode LTD. TECHNICAL SPECIFICATION SMB/DO-214AA A B MAX. .155(3.94) .180(4.57) MIN. .130(3.30) .160(4.06) E F MAX. .220(5.59) .096(2.44) MIN. .205(5.21) .084(2.13) C D .083(2.11) .012(0.305) .077(1.96) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) Dimensions in inches and (millimeters) load, UNITS V V V A A V µA µA pF o C/W o C e.com