MAXIM MAX4644EUT-T

19-1657; Rev 0; 3/00
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
Features
♦ +1.8V to +5.5V Single-Supply Operation
♦ Rail-to-Rail® Analog Signal Range
♦ Guaranteed RON
4Ω max (+5V supply)
8Ω max (+3V supply)
♦ +1.8V Operation
RON 30Ω typ Over Temperature
tON 18ns typ, tOFF 12ns typ
♦ Guaranteed RON Flatness: 0.75Ω typ (+5V supply)
♦ Guaranteed RON Match Between Channels:
0.1Ω typ (+5V supply)
♦ Low Leakage (<0.35nA) Over Entire Temperature
Range
♦ Excellent AC Characteristics
Low Crosstalk: -82dB at 1MHz
High Off-Isolation: -80dB at 1MHz
0.018% Total Harmonic Distortion
♦ Low Power Consumption: < 0.01µW
The MAX4644’s features include low leakage currents
over the entire temperature range, TTL/CMOS-compatible digital logic, and excellent AC characteristics. It is
packaged in either a small 8-pin µMAX or a tiny 6-pin
SOT23.
________________________Applications
Battery-Operated Equipment
Audio and Video Signal Routing
Low-Voltage Data-Acquisition Systems
Ordering Information
Sample-and-Hold Circuits
PART
TEMP. RANGE
PINPACKAGE
TOP
MARK
MAX4644EUT-T
-40°C to +85°C
6 SOT23-6
AAHQ
MAX4644EUA
-40°C to +85°C
8 µMAX
Communications Circuits
—
Rail-to-Rail is a trademark of Nippon Motorola, Ltd.
Pin Configurations/Functional Diagrams/Truth Table
TOP VIEW
MAX4644
MAX4644
IN 1
6
NO
V+ 2
5
COM
GND 3
4
NC
COM 1
8
NO
NC 2
7
N.C.
GND 3
6
IN
V+ 4
5
N.C.
SOT23-6
µMAX
MAX4644
IN
NC
NO
0
ON
OFF
1
OFF
ON
________________________________________________________________ Maxim Integrated Products
1
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
MAX4644
General Description
The MAX4644 is a single-pole/double-throw (SPDT)
switch that operates from a single supply ranging from
+1.8V to +5.5V. It provides low 4Ω on-resistance (RON)
as well as 1Ω RON flatness over the entire analog signal
range. The MAX4644 offers fast switching times of less
than 20ns while ensuring break-before-make operation.
It typically consumes only 0.01µW of quiescent power,
making it suitable for use in low-power, portable applications.
MAX4644
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
ABSOLUTE MAXIMUM RATINGS
All Voltages Referenced to GND
V+ .............................................................................-0.3V to +6V
IN, COM, NO, NC (Note 1) ...........................-0.3V to (V+ + 0.3V)
Continuous Current (any terminal)....................................±20mA
Continuous Current (NO, NC, and COM) .........................±50mA
Peak Current (NO, NC, and COM, pulsed at 1ms,
10% duty cycle)......................................................... ±100mA
Continuous Power Dissipation (TA = +70°C)
6-Pin SOT23 (derate 8.70mW/°C above +70°C)........ 696mW
8-Pin µMAX (derate 4.5mW/°C above +70°C) ........... 362mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................ +300°C
Note 1: Signals on NO, NC, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +4.5V to +5.5V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
V+
V
ANALOG SWITCH
Analog Signal Range
On-Resistance
VCOM,
VNO,
VNC
RON
On-Resistance Match
Between Channels (Note 2)
∆RON
On-Resistance Flatness
(Note 3)
RFLAT
0
V+ = 4.5V, ICOM =
10mA, VNO or
VNC = 0 to V+
TA = +25°C
V+ = 4.5V, ICOM =
10mA, VNO or
VNC = 0 to V+
TA = +25°C
V+ = 4.5V, ICOM =
10mA, VNO or
VNC = 0 to V+
TA = +25°C
2.5
4
Ω
TA = TMIN to TMAX
4.75
0.1
Ω
TA = TMIN to TMAX
0.4
0.75
1
Ω
TA = TMIN to TMAX
1.2
NO, NC Off-Leakage
Current (Note 4)
INO(OFF),
INC(OFF)
V+ = 5.5V, VCOM =
1V or 4.5V, VNO or
VNC = 4.5V or 1V
TA = +25°C
-0.25
TA = TMIN to TMAX
-0.35
COM Off-Leakage Current
(Note 4)
V+ = 5.5V, VCOM =
1V or 4.5V, VNO or
VNC = 4.5V or 1V
TA = +25°C
-0.25
ICOM(OFF)
TA = TMIN to TMAX
-0.35
COM On-Leakage Current
(Notes 4, 5)
ICOM(ON)
V+ = 5.5V, VCOM =
1V or 4.5V
TA = +25°C
-0.25
TA = TMIN to TMAX
-0.35
0.01
0.25
nA
0.35
0.01
0.25
nA
0.35
0.01
0.25
0.35
nA
DIGITAL INPUTS
INPUTS
Input Logic High
VIH
Input Logic Low
VIL
Input Current
IIN
2
2.4
VIN = 0.8V or 2.4V
-0.1
V
0.005
_______________________________________________________________________________________
0.8
V
0.1
µA
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
MAX4644
ELECTRICAL CHARACTERISTICS —Single +5V Supply (continued)
(V+ = +4.5V to +5.5V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
11
15
UNITS
DYNAMIC
Turn-On Time (Note 4)
Turn-Off Time (Note 4)
Break-Before-Make (Note 4)
Charge Injection
tON
tOFF
tBBM
Q
RL = 300Ω; CL =
35pF; VNO, VNC = 3V;
Figure 2
TA = +25°C
RL = 300Ω; CL =
35pF; VNO, VNC = 3V;
Figure 2
TA = +25°C
RL = 300Ω;
CL = 35pF; VNO or
VNC = +3V; Figure 2
TA = +25°C
ns
TA = TMIN to TMAX
18
3
5
ns
TA = TMIN to TMAX
6
8
ns
TA = TMIN to TMAX
1
VGEN = 0, RGEN = 0, CL = 1nF, Figure 4
5
pC
NO or NC = GND, f = 1MHz, Figure 5
12
pF
34
pF
NO, NC Off-Capacitance
CNO(OFF),
CNC(OFF)
Switch On-Capacitance
C(ON)
f = 1MHz, Figure 5
Off-Isolation (Note 6)
VISO
CL = 5pF, RL = 50Ω,
Figure 3
f = 10MHz
-55
f = 1MHz
-80
Crosstalk (Note 7)
VCT
CL = 5pF, RL = 50Ω,
Figure 3
f = 10MHz
-62
f = 1MHz
-82
Total Harmonic Distortion
THD
RL = 600Ω, 0.5Vp-p, f = 20Hz to 20kHz
0.018
V+ = 5.5V, VIN = 0 or V+
0.001
dB
dB
%
SUPPLY
Positive Supply Current
I+
1.0
µA
ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V+ = +2.7V to +3.3V, VINH = 2.0V, VINL = 0.4V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
V+
V
ANALOG SWITCH
Analog Signal Range
On-Resistance
VCOM,
VNO,
VNC
RON
On-Resistance Match
Between Channels (Note 2)
∆RON
On-Resistance Flatness
(Note 3)
RFLAT
0
V+ = 2.7V, ICOM =
10mA, VNO or
VNC = 0 to V+
TA = +25°C
V+ = 2.7V, ICOM =
10mA, VNO or
VNC = 0 to V+
TA = +25°C
V+ = 2.7V, ICOM =
10mA, VNO or
VNC = 0 to V+
TA = +25°C
6
Ω
TA = TMIN to TMAX
9
0.1
Ω
TA = TMIN to TMAX
TA = TMIN to TMAX
8
0.4
1.5
3
Ω
3.5
_______________________________________________________________________________________
3
MAX4644
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
ELECTRICAL CHARACTERISTICS—Single +3V Supply (continued)
(V+ = +2.7V to +3.3V, VINH = 2.0V, VINL = 0.4V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DIGITAL INPUTS
Input Logic High
VIH
Input Logic Low
VIL
2.0
Input Current
IIN
VIN = 0.4V or 2.0V
RL = 300Ω; CL =
35pF; VNO, VNC = 2V;
Figure 2
TA = +25°C
tON
RL = 300Ω; CL =
35pF; VNO, VNC = 2V;
Figure 2
TA = +25°C
RL = 300Ω; CL =
35pF; VNO, VNC = 2V;
Figure 2
TA = +25°C
-0.1
V
0.4
V
0.005
0.1
µA
14
20
DYNAMIC
Turn-On Time (Note 4)
Turn-Off Time (Note 4)
Break-Before-Make (Note 4)
Charge Injection
tOFF
tBBM
Q
ns
TA = TMIN to TMAX
22
4
7.5
ns
TA = TMIN to TMAX
8
8
ns
TA = TMIN to TMAX
1
VGEN = 0, RGEN = 0, CL = 1nF, Figure 4
5
pC
NO or NC = GND, f = 1MHz, Figure 5
12
pF
34
pF
NO, NC Off-Capacitance
CNO(OFF),
CNC(OFF)
Switch On-Capacitance
C(ON)
f = 1MHz, Figure 5
Off-Isolation (Note 6)
VISO
CL = 5pF, RL = 50Ω,
Figure 3
f = 10MHz
-55
f = 1MHz
-80
Crosstalk (Note 7)
VCT
CL = 5pF, RL = 50Ω,
Figure 3
f = 10MHz
-62
f = 1MHz
-82
dB
dB
SUPPLY
Positive Supply Current
I+
V+ = 3.3V, VIN = 0 or V+
0.001
1.0
µA
Note 2: ∆RON = RON(MAX) - RON(MIN).
Note 3: RON flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 4: Guaranteed by design.
Note 5: On-Leakage performed with voltage applied to COM, with NO and NC left floating.
Note 6: Off-Isolation = 20log10 (VO / VI), where VO is VCOM and VI is either VNC or VNO from the network analyzer.
Note 7: Crosstalk is measured between the two switches.
4
_______________________________________________________________________________________
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
(V+ = +5V or +3V, VINH = V+, VINL = GND, TA = +25°C, unless otherwise noted.)
ICOM = 10mA
4
15
V+ = 3V
LEAKAGE (pA)
RON (Ω)
RON (Ω)
V+ = 1.8V
10
3
V+ = 2.5V
OFF-LEAKAGE
100
10
V+ = 5V
V+ = 3V
5
1000
MAX4644-03
ICOM = 10mA
MAX4644-02
5
MAX4644-01
20
ON-/OFF-LEAKAGE CURRENT
vs. TEMPERATURE
ON-RESISTANCE vs. TEMPERATURE
ON-RESISTANCE vs. VCOM
2
V+ = 5V
ON-LEAKAGE
2
3
4
-40
5
-15
10
35
60
-40
85
-15
10
35
60
TEMPERATURE (°C)
TEMPERATURE (°C)
CHARGE INJECTION vs. VCOM
SUPPLY CURRENT vs. SUPPLY VOLTAGE
SUPPLY CURRENT vs.
TEMPERATURE
140
100
80
60
40
IN = GND
120
SUPPLY CURRENT (nA)
120
100
80
60
40
20
20
0
0
300
IN = GND
250
SUPPLY CURRENT (nA)
V+ = 5V
85
MAX4644-06
VCOM (V)
MAX4644-05
140
1
MAX4644-04
0
CHARGE INJECTION (pC)
1
1
0
200
V+ = 5V
150
100
V+ = 3V
V+ = 1.8V
50
IN = V+
1
2
3
4
5
0
1.8
VCOM (V)
LOGIC THRESHOLD vs.
SUPPLY VOLTAGE
-40
5.8
0.5
9
tON
6
tOFF
3
1.8
2.6
3.4
4.2
SUPPLY VOLTAGE (V)
5.0
5.8
60
85
V+ = 5V
tON
6
tOFF
4
2
0
0
35
8
SWITCHING TIMES (ns)
SWITCHING TIMES (ns)
1.0
10
SWITCHING TIMES vs. TEMPERATURE
10
MAX4644-08
MAX4644-07
15
12
1.5
-15
TEMPERATURE (°C)
SWITCHING TIMES vs. SUPPLY VOLTAGE
2.0
LOGIC THRESHOLD (V)
2.8
3.8
4.8
SUPPLY VOLTAGE (V)
MAX4644-09
0
0
2
3
4
SUPPLY VOLTAGE (V)
5
-40
-15
10
35
60
85
TEMPERATURE (°C)
_______________________________________________________________________________________
5
MAX4644
Typical Operating Characteristics
Typical Operating Characteristics (continued)
(V+ = +5V or +3V, VINH = V+, VINL = GND, TA = +25°C, unless otherwise noted.)
V+ = 5V
-10
0.05
MAX4644-10
0
ON-LOSS
MAX4644-11
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
FREQUENCY RESPONSE
V+ = 5V
0.04
-20
OFF-ISOLATION
THD (%)
-30
(dB/div)
MAX4644
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
-40
-50
0.03
0.02
-60
-70
0.01
-80
0
0.01
-90
0.01
0.1
1
10
100
1000
0.1
1
10
100
FREQUENCY (kHz)
FREQUENCY (MHz)
Pin Description
MAX4644
NAME
FUNCTION
SOT23
µMAX
1
6
IN
Logic-Controlled Input
2
4
V+
Positive Supply Voltage Input. Bypass with a 0.1µF capacitor to GND.
3
3
GND
Ground
—
5, 7
N.C.
No Connection. Not internally connected.
4
2
NC
Analog Switch Normally Closed Terminal
5
1
COM
6
8
NO
Analog Switch Common Terminal
Analog Switch Normally Open Terminal
Note: The switches are bidirectional, which means that a signal can be passed through either side of the on switch. However,
the typical off-capacitances differ as shown in the Electrical Characteristics.
6
_______________________________________________________________________________________
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
COM
N0, NC
GND
Figure 1. Overvoltage Protection Using External Blocking
Diodes
Applications Information
The MAX4644 operates from a single supply ranging
from +1.8V to +5.5V. The device is guaranteed to be
functional over that supply range, but TTL/CMOS compatibility is only valid for operation using a +5V supply.
All voltage levels are referenced to GND. Positive and
negative DC analog inputs or AC signals can be
accommodated by shifting V+ and GND.
ESD-protection diodes are internally connected
between each analog-signal pin and both V+ and GND.
One of these diodes conducts if any analog signal
exceeds V+ or GND (Figure 1). Virtually all of the analog leakage current comes from the ESD diodes to V+
or GND. Although the ESD diodes on a given signal pin
are identical, and therefore fairly well balanced, they
are reverse biased differently. Each is biased by either
V+ or GND and the analog signal. This means their
leakages will vary as the signal varies. The difference in
the two diode leakages to the V+ and GND pins constitutes the analog-signal-path leakage current. All analog
leakage current flows between each pin and one of the
supply terminals, not to the other switch terminal. This is
why both sides of a given switch can show leakage currents of the same or opposite polarity.
There is no normal current path between the analogsignal paths and V+ or GND. V+ and GND also power
the internal logic and logic-level translators. The logiclevel translators convert the logic level into switched V+
and GND signals to drive the analog signal gates.
Chip Information
TRANSISTOR COUNT: 105
_______________________________________________________________________________________
7
MAX4644
V+
MAX4644
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
V+
V+
NO
VNO
NC
IN
50%
0
VCOM
COM
35pF
50Ω
50%
IN
MAX4644
VIN
tr < 5ns
tf < 5ns
VIH + 0.5V
OPEN
VNO
VCOM
300Ω
GND
90%
90%
0
tON
tOFF
V+
VNC
V+
NC
NO
VIH + 0.5V
OPEN
IN
MAX4644
VIN
IN
VCOM
COM
50Ω
50%
50%
0
300Ω
GND
35pF
VNC
VCOM
0
90%
tOFF
90%
tON
V+
VS
V+
VNO
VNC
VIH + 0.5V
IN
0
VS
MAX4644
VIN
IN
COM
VCOM
50%
VS
50%
90%
90%
VCOM
50Ω
GND
300Ω
35pF
0
tBBM
tBBM = tON(NC) - tOFF(NO)
OR
tBBM = tON(NO) - tOFF(NC)
Figure 2. Switching Times
8
_______________________________________________________________________________________
tBBM
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
MAX4644
V+ 0.1µF
V+
NETWORK
ANALYZER
50Ω
50Ω
VIN
NO
OR
NC
50Ω
MAX4644
VOUT
MEAS
REF
COM
V+
IN
50Ω
GND
MEASUREMENTS ARE STANDARDIZED AGAINST
SHORT AT SOCKET TERMINALS. OFF-ISOLATION IS
MEASURED BETWEEN COM AND “OFF” TERMINAL
ON EACH SWITCH. ON-LOSS IS MEASURED BETWEEN
COM AND “ON” TERMINAL ON EACH SWITCH. SIGNAL
DIRECTION THROUGH SWITCH IS REVERSED; WORST
VALUES ARE RECORDED.
50Ω
OFF-ISOLATION = 20log
VOUT
VIN
V
ON-LOSS = 20log OUT
VIN
Figure 3. Off-Isolation and On-Loss
V+
V+
V+
NO
OR
NC
VNO OR VNC = 0V
V+
NO
OR
NC
MAX4644
VIN
COM
IN
GND
50Ω
VOUT
CL
1000pF
AS
REQUIRED
MAX4644
1MHz
CAPACITANCE
ANALYZER
COM
IN
GND
V+
VIN
0
Figure 5. NO, NC, and COM Capacitance
∆VOUT
VOUT
∆VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER
ERROR Q WHEN THE CHANNEL TURNS OFF.
Q = ∆VOUT x CL
Figure 4. Charge Injection
_______________________________________________________________________________________
9
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
6LSOT.EPS
MAX4644
Package Information
10
______________________________________________________________________________________
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
8LUMAXD.EPS
______________________________________________________________________________________
11
MAX4644
Package Information (continued)
MAX4644
High-Speed, Low-Voltage, 4Ω,
SPDT CMOS Analog Switch
NOTES
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2000 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.