ER100S THRU ER106S SUPERFAST RECOVERY RECTIFIERS VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere FEATURES l Superfast recovery times-epitaxial construction l Low forward voltage, high current capability l Exceeds environmental standards of MIL-S-19500/228 l l Hermetically sealed Low leakage l l High surge capability Plastic package has Underwriters Laboratories A-405 Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound MECHANICAL DATA Case: Molded plastic, A-405 Terminals: Axial leads, solderable to per MIL-STD-202, Method 208 Polarity: Color Band denotes cathode end Mounting Position: Any Weight: 0.008 ounce, 0.22 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz. ER100S ER101S ER101AS ER102S ER103S ER104S ER106S UNITS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375"(9.5mm) lead lengths at TA=55 ¢J 50 35 50 100 70 100 150 105 150 Peak Forward Surge Current, IFM (surge): 8.3ms single half sine-wave superimposed on rated load(JEDEC method) Maximum Forward Voltage at 1.0A DC 200 140 200 1.0 300 210 300 400 320 400 600 420 600 V V A A 30.0 5.0 V £g A 150 £g A .95 Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage TA=125 ¢J Maximum Reverse Recovery Time(Note 1) Typical Junction capacitance (Note 1) Typical Junction Resistance(Note 2) R £KJA Operating and Storage Temperature Range TJ V 1.25 35.0 17 50 -55 to +150 1.7 ns PF ¢J /W ¢J NOTES: 1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 3. Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted RATING AND CHARACTERISTIC CURVES FORWARD SURGE CURRENT, AMPERES pk (HALF SINE WAVE) ER100S THRU ER106S trr +0.5A 0 -0.25 -1.0 SET TIME BASE FOR Source Impedance = 50 Ohms 1cm 50 ns/cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND MAXIMUM AVERAGE CURRENT RATING SINGLE PHASE, HALF WAVE, 60Hz RESISTIVE OR INDUCTIVE LOAD .375"(9.5mm) LEAD LENGTHS 1.0 .8 .6 .4 .2 0 0 40 20 60 80 100 120 140 160 AMBIENT TEMPERATURE, ¢J Fig. 3-MAXIMUM AVERAGE FORWARD CURRENT RATING 12 6 1 2 4 6 8 10 40 60 80 100 20 NUMBER OF CYCLES AT 60Hz 180 10 ER100S ~ ER102S 1.0 0.1 ER103S ~ ER104S ER106S 0.01 TJ = 25¢J 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE VOLTS 1000 Fig. 4-FORWARD CURRENT DERATING CURVE T J = 125¢J 100 JUNCTION CAPACITANCE, pF IR-REVERSE LEAKAGE CURRENT MICROAMPERES AVERAGE FORWARD RECTIFIED CURRENT AMPERES 1.6 1.2 18 Fig. 2-MAXIMUM NON-REPEITIVE SURGE CURRENT TEST CIRCUIT DIAGRAM 1.4 24 INSTANTANEOUS FORWARD CURRENT AMPERES NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. 30 T J = 75¢J 10 T J = 25¢J 1.0 0.1 20 40 60 80 100 120 % OF PIV, VOLTS Fig. 5-TYPICAL REVERSE CHARACTERISTICS 100 TJ = 25¢J f = 1.0MHz Vsig = 50mVp-p 10 1 0.1 1 10 REVERSE VOLTAGE, VOLTS Fig. 6-TYPICAL JUNCTION CAPACITANCE 100