Silicon Spreading Resistance Temperature Sensor in Miniature Metal Housing KTY 16-6 Features • Temperature dependent Resistor with Positive Temperature Coefficient • Small metal housing with insulated leadwires • Fast response • High reliability due to multilayer gold contacts • n-conducting silicon crystal • Polarity independent due to symmetrical construction • Selected at 25 ˚C; R25 = 2000 Ω ± 1% Test voltage: 200 V ~ Isolation voltage: 20 V ~ Test duration: 1s Type Marking Ordering Code Pin Configuration 1 KTY 16-6 - Q62705-K128 electrical contact, black Package 2 electrical contact, red Ni-Plated brass tube housing: potential free Absolute Maximum Ratings Parameter Symbol Limit Values Unit Maximum operating voltage 1) TA ≤ 25 ˚C, t ≤ 10 ms Vopmax 25 V Maximum operating current Iopmax Iopp 5 mA 7 mA Top Tstg − 50 … + 150 ˚C − 50 … + 150 ˚C Peak operating current TA ≤ 25 ˚C, t ≤ 10 ms Operating temperature range Storage temperature range 1) ESD Class 1. When the temperature sensor is operated with long supply leads, it should be protected through the parallel connection of a > 10 nF capacitor to prevent damage to the sensor through induced voltage peaks. Semiconductor Group 1 1998-09-17 KTY 16-6 Electrical Characteristics at TA = 25 ˚C unless otherwise specified Parameter Symbol Limit Values min. typ. max. 1980 – 2020 – – 40 4 – – Ω R25 Temperature sensor resistance IB = 1 mA Thermal time constant (63% of ∆TA) in still air in still oil (Freon FC40/PP7) Unit s τair τoil Package Outline Ni-plated Brass Tube Housing with Tefzel isolated leadwires 12 ±0.5 ø3 ±0.15 2 100 ±5 1 3 ±1 abisoliert/ stripped ø1.1 ø0.4 (Draht / wire AWG 26) GPD05638 Weight approx. 0,7 g Dimensions in mm Exterior Packaging I.e. tubes, trays, boxes are shown in our Data Book “Package Information”. Semiconductor Group 2 1998-09-17