IA6008-CA11A Contact image sensor heads Color image sensor heads for multi-function IA6008-CA11A The new compact full color contact image sensor heads are world’s smallest in its class and designed to minimize the size and weight of the scanner. The sensor chip used for the CIS is produced with the proprietary technologies of ROHM LSI circuit design and accumulated manufacturing technology of monochrome devices. This product has an excellent color reproduction capability with the high level of noise immunity with the ultra small package. It operates on 3.3 volts power supply. zApplications Image sensor heads device for multiple function facsimiles such as color scanner and multiple function printer. zFeatures 1) Signal amplifier is built in to the image sensor IC in order to increase immunity to external noise. 2) Additionally, newly developed analog memory circuit and realizes high speed scanning. 3) The LED light source is mounted on the same substrate as the sensor chip which makes it possible to package the device with lighter weight and an extremely small size. 4) With the proprietary prism, the output signal is maintained uniformly. 5) The ceramic substrate is used for excellent dimensional accuracy and thermal stability. 236±0.2 210(Effective Reading Width) CL 19.05±0.2 (1.8) 5±0.20 Effective 1st bit 28.85 +− 0.05 0.25 181.15 1mm pitch 12pin 10.6±0.3 A ROHM (15.5) (25) 2-R1.5 Effective Depth 2 13.4 + − 0.5 12.8±0.5 Max. 1.5 Paper feeding direction zExternal dimensions (Unit : mm) 5.3±0.2 No.1 No.12 14.9±0.2 Note) Deflection at the top of A faces : 0 to 0.25 Pin No. No.1 No.2 No.3 No.4 No.5 No.6 Signal Ao GND GND VDD VREF SP Pin No. No.7 No.8 No.9 No.10 No.11 No.12 Signal CLK V-LED B-GND G-GND R-GND N.C. 1/4 IA6008-CA11A Contact image sensor heads zCharacteristics Parameter Symbol Typ. Unit Effective scanning width − Primary scan dot density − 600 dpi mm − 5148 dots VDD 3.3 V Reference voltage VREF 0.8 V Scanning speed SLT 5.1 ms / line Total dot number Power supply voltage CLK 3.3 MHz Maximum dynamic range VRMax 0.75 V Minimum dynamic range VRMim. 0.375 V Vod Vref + − 0.1 V − 5 to 45 °C Clock frequency Dark output Operating temperature zPin assignments No. Circuit I/O Function 1 AO O Analog output 2 GND I Ground 3 GND I Ground 4 VDD I Power supply 5 VREF I Reference voltage 6 SP I Start pulse 7 CLK I Clock 8 V-LED I LED power supply 9 B-GND I BLUE LED ground 10 G-GND I GREEN LED ground 11 R-GND I RED LED ground 12 NC − − 2/4 IA6008-CA11A Contact image sensor heads zTiming chart (a) CLK Timing Chart 1/fCLK twH twL 50% 50% CLK 50% 50% SP tSETUP tHOLD ts Ao 1pixel 2pixel (b) Data Output Timing Chart After turning on the SP pulse, the analog output starts from the setting up point of 64 clock pulse. 0 1 51 52 53 63 64 65 CLK SP Ao Vref output period(51pixels) Vdummy Analog output period 1 to 51pixels 52 to 63pixels 64 to 5211pixels ∗1 Note)The CLK section area which is over the effective pixel numbers (Output blank part) cannot be used as the analog Output standard level. ∗1 VREF output period is defined by the peripheral circuit in the next page. 3/4 IA6008-CA11A Contact image sensor heads zCircuit diagram VDD 1µF×12 1 GND 5148 SP VDD ANALOG MEMORY CIRCUIT CLK VREF AO VREF 1µF×2 VLED RGND GGND BGND zPeripheral circuit CIS UNIT 12 9 10 11 8 1 5 4 6 7 3 2 R3 R2 B G R1 C5 R C1 A SP VDD CLK GND C3 NC C2 LED GND C4 VLED VREF GND R1=R2=100Ω, R3=100KΩ C1=C2=47µF C3=100µF, C4=0.1µF, C5=100pF 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0