IA2002-CE10A Contact image sensor heads Image sensor heads for Card-compatible IA2002-CE10A ROHM’s IA2002-CE10A contact image sensor head utilizes a special ceramic substrate featuring superior dimensional precision and thermal dissipation characteristics, resulting in stable reading, even under fluctuating ambient temperature conditions. A unique prism, developed using the latest in optical technology, ensures simultaneous uniform light output and low light radiation to the media. In addition, bidirectional reading capability enables greater flexibility regarding carrier orientation. zApplications Image scanners (i.e. business card), detection sets (e.g. surface, paper edge, paper type) zFeatures 1）25in/s (635mm/s) read speed (monochrome) 2）Bidirectional reading capability 3）54mm read width (70mm total width) 4）Color light source (switchable) zDimensions (Unit : mm) 10.42 (Depth1) (深さ 1) 2.5 5.5 12.5 17.5 5.5 70 54(Effective Scanning Width) 54(有効読取幅) Max.2.3 15.5 25 No.9 (NOTE 1) Deflection at the top of glass:0-0.25 Projection to platen is positive. (NOTE 2) Socket Housing:IL-Z-9S-S125C3(JAE) Socket Contact:IL-Z-C3-A-15000(JAE) No.1 Max.13.25 Max.1.5 35 Pin No. No.1 No.2 No.3 No.4 No.5 No.6 Signal CLK SP VDD GND AO RLED Pin No. Signal No.7 No.8 No.9 GLED BLED VLED 1/4 IA2002-CE10A Contact image sensor heads zCharacteristics Parameter Symbol Typ. Unit Effective scanning width − 54 mm Primary scan dot density − 200 dpi − 432 dots VDD 3.3 to 5 V Scanning speed SLT 0.2×3 ms / line Clock frequency CLK 4 MHz Total dot number Power supply voltage Maximum dynamic range (VDD=5V) VRMax. 0.5 V Minimum dynamic range (VDD=5V) VRMin. 0.25 V Maximum dynamic range (VDD=3.3V) VRMax. 0.4 V Minimum dynamic range (VDD=3.3V) VRMin. 0.2 V Dark output (VDD=5V) Vod 1.2±0.4 V Dark output (VDD=3.3V) Vod 0.8±0.4 V Operating temperature − 5 to 45 °C zPin assignments No. Circuit I/O 1 CLK I Clock 2 SP I Start Pulse 3 VDD I Power Supply 4 GND I Ground 5 Ao O Analog Output 6 RLED I LED ground 7 GLED I LED ground 8 BLED I LED ground 9 VLED I LED power supply Functions 2/4 IA2002-CE10A Contact image sensor heads zTiming chart (a) CLK Timing Chart 1/fCLK twCLK 50% twCLK 50% 50% CLK ts SP 50% 50% tSETUP tHOLD Ao 1pixel 2pixel (b) Data Output Timing Chart After turning on the SP pulse, the analog output shape starts from the setting up point of 65 clock pulse. 1 2 52 53 54 64 65 66 CLK SP Ao VREF Output Period (52pixels) 1 to 52 pixels Vdummy Analog Output Period 53 to 64pixels 1 to 432pixels Note) Output blank part cannot be used as the analog output standard level. 3/4 IA2002-CE10A Contact image sensor heads zEquivalent circuit VDD 1µF x 2 200Ω 432 1 GND 1µF SP VDD ANALOG MEMORY CIRCUIT 75Ω CLK Vout VREF 1µF VLED RGND GGND BGND zPeripheral circuit 8 7 6 9 5 3 2 1 4 C2 R2 R1 C1 B G R VDD C3 SP CLK C4 LED GND VLED A GND ∗ R1=R2=100Ω C1=47µF, C2=100pF C3=100µF, C4=0.1µF ∗ Please adjust the value of resistance to fit your interface circuit. 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0