OSRAM SFH5130

Photodetektor mit Spannungsausgang
Light to Voltage Converter
Lead (Pb) Free Product - RoHS Compliant
SFH 5130
Wesentliche Merkmale
Features
• Integrierter Fotodetektor mit linearem
Spannungsausgang
• Transparentes Plastikgehäuse mit 3 Pins
• Hohe Empfindlichkeit von 350 nm bis 1100 nm
• Runde Fotodiode
• Integrated photodiode with linear voltage output
Anwendungen
Applications
• Lichtschranken
• Photointerrupter
• Transparent sidelooker package with 3 pins
• High sensitivity from 350 nm to 1100 nm
• Circular photodiode
Typ
Type
Bestellnummer
Ordering Code
Gehäuse
Package
SFH 5130
on request
Sidelooker Gehäuse
Sidelooker Package
2004-12-20
1
SFH 5130
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
Lagertemperatur
Storage temperature range
Tstg
– 40 … + 85
°C
Versorgungsspannung
Supply Voltage
VDD
6
V
Ausgangsspannung
Output voltage
VOUT
< VDD
V
2
kV
Elektrostatische Entladung
ESD
Electrostatic Discharge
Human Body Model according to EOS/ESD-5.1-1993
Empfohlener Arbeitsbereich
Recommended Operating Conditions
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
min.
typ.
max.
Funktionstemperatur
Operating Temperature
Top
- 40
+ 25
+ 75
°C
Betriebsspannung
Supply Voltage
VDD
4.5
5
5.5
V
Kapazitive Ausgangslast
Output load capacitance
CL
30
nF
Kennwerte (TA = 25 °C, VDD = 5 V, RL = 10 kΩ)
Characteristics
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
min.
typ.
max.
Stromaufnahme, Ee = 0
Current consumption
IDD
–
1.5
4.5
mA
Dunkelspannung
Dark Voltage
VD
–
1.2
15
mV
Spektraler Bereich der Fotoempfindlichkeit
Spectral range of sensitivity
λ
350
–
1100
nm
2004-12-20
2
SFH 5130
Kennwerte (TA = 25 °C, VDD = 5 V, RL = 10 kΩ)
Characteristics
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
min.
typ.
max.
Wellenlänge der max. Fotoempfindlichkeit
Wavelength of max. photosensitivity
λs max
–
770
–
nm
Durchmesser der aktiven Fläche
Diameter of active area
D
–
0.75
–
mm
Empfindlichkeit1), λ = 428 nm
Irradiance responsivity
Ne
–
1180
–
mV/µW/cm2
Ausgangsspannung1)
Output Voltage, Ee=1.69 µW/cm2, λ = 428 nm
VO
1.0
–
3.2
V
Sättigungsspannung, VDD = 4.5V, Ee ≥ 7 µW/cm2 Vsat
Maximum output voltage swing
4
4.47
–
V
Anstiegszeit2), Ee = 0 to Ee = 1.69 µW/cm2
Rise time
Abfallzeit, Ee =1.69 to 0 µW/cm2
Fall time
Einschwingzeit, to 99% of nominal
Settling time
tr
–
50
250
µs
tf
–
70
250
µs
ts
–
90
–
µs
Temperaturkoeffizient der Dunkelspannung,
T = 5 to 45 °C
Temperature coefficient of dark voltage
ανd
– 100
±8
+ 100
µV/K
Temperaturkoeffizient der Ausgangsspannung
Temperature coefficient of output voltage
Ee = 1.69 µW/cm2, λ = 428 nm, T = 5 to 45 °C
ανo
–3
±1
+3
mV/K
Power supply rejection ratio
fac = 100 Hz
fac = 1 kHz
– 0.15
PSRR
PSRR
Output noise voltage
f = 0 to 1 kHz
f = 10 Hz
f = 100 Hz
f = 1 kHz
1)
+ 0.15 %/K
3)
–
–
45
45
–
–
dB
dB
–
–
–
<1
<1
<1
–
–
–
µV RMS
µV/Hz(1/2)
µV/Hz(1/2)
µV/Hz(1/2)
The sensitivity is characterized using 428 nm LEDs as light source. A constant irradiance over the whole lens area
is created.
2004-12-20
3
SFH 5130
2)
The light source used is a 428 nm LED with following characteristics: tr > 1 µs, tf < 1 µs. The output waveform is
monitored on an osciloscope with tr > 100 ns, Zi = 1 MΩ, Ci < 20 pF. The rise time is defined as the time from the
10% to the 90% value, the fall time is defined as the time from the 90% to the 10% value.
3)
PSRR is defined as 20 log (VDD(f) / VO(f)) with VDD(0 Hz) = 4.5 V and VO(0 Hz) = 2 V
2004-12-20
4
SFH 5130
Spectral Sensitivity
Srel = f (λ)
Current Consumption
IDD = f (VDD)
OHF01328
100
Srel
%
Dark Voltage
VD = f (VDD)
OHF01346
1.8
I DD
mA
OHF01336
2
VD mV
1.7
80
1.6
1.6
60
1.2
40
1.5
20
1.4
0
400
600
800
1.3
1000 nm 1200
0.8
4
4.5
5
5.5 V
λ
Output Voltage, VO = f (TA),
Ee = 1.69 µW/cm2, λ=428nm
Current Consumption
IDD = f (TA)
OHF01348
1.1
6
0.4
4
4.5
5
VDD
VO
VO (25 ˚C)
6
VDD
Dark Voltage
VD = f (TA)
OHF01347
1.8
I DD
5.5 V
mA
OHF01345
2
VD mV
1.7
1.6
1.0
1.6
1.2
0.95
1.5
0.9
0.8
1.4
0.85
0.8
-25
0
25
50 ˚C 75
1.3
-25
0
25
50 ˚C 75
TA
TA
Linearity
VO = f (Ee)
Directional Characteristics
VO = f (φ)
OHF01379
5
V
OHF01349
100
%
VO
VO /VOmax
4
80
3
60
2
40
1
20
0
0
1
2
µW/cm 2 4
0
-75
-50
-25
2004-12-20
0
25
50 [˚] 75
ϕ
Ee
5
0.4
-25
0
25
50 ˚C 75
TA
SFH 5130
0.9 (0.035)
2.54 (0.100)
5˚
0.4 (0.016)
R0.9 (0.035)
0.63 (0.025)
Maßzeichnung
Package Outlines
5˚
4.7 (0.185) ± 0.1 (0.004)
1.7 (0.067) ± 0.1 (0.004)
GND VDD VOUT
(4 (0.157))
2 (0.079)
0.5 (0.020)
0.5 (0.020)
ø1.77 (0.070)
4.1 (0.161)
4.6 (0.181)
0.95 (0.037) ± 0.05 (0.002)
2 (0.079)
2.5 (0.098)
15.3 (0.602) ± 0.25 (0.010)
GEOY6061
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
2004-12-20
6
SFH 5130
Lötbedingungen
Soldering Conditions
Wellenlöten (TTW)
TTW Soldering
(nach CECC 00802)
(acc. to CECC 00802)
OHLY0598
300
C
T
10 s
250
Normalkurve
standard curve
235 C ... 260 C
Grenzkurven
limit curves
2. Welle
2. wave
200
1. Welle
1. wave
150
ca 200 K/s
2 K/s
5 K/s
100 C ... 130 C
100
2 K/s
50
Zwangskühlung
forced cooling
0
0
50
100
150
200
s
250
t
Published by
OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
www.osram-os.com
© All Rights Reserved.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.
1
A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2004-12-20
7