Bussmann® Industrial HRC Fuse 13.8 x 58.7mm, BS88: Offset Blade Tags NSD Part 6, IEC 269-1 CURRENT RATING 16 20 25 32 40 4 6 10 1,000 2 Time-Current Characteristic Curve (Full Size Curves Available) 20M25 20M32 20M36 32M36 32M40 32M50 32M63 100 TIME IN SECONDS CATALOG SYMBOL: NSD INDUSTRIAL HRC FUSE OFFSET BLADE TAGS PACKAGE QUANTITY: 20 80kA INTERRUPTING RATING MOUNTS IN CAMLOC OR SAFELOC SERIES HOLDERS Dimensional Data: 10 1 D N A F B .1 CURRENT IN AMPERES Electrical Characteristics Catalog Number NSD2 NSD4 NSD6 NSD10 NSD16 NSD20 NSD25 NSD32 NSD20M25 NSD20M32 NSD20M36 NSD32M36 NSD32M40 NSD32M50 NSD32M63 Ampere Rating 2 4 6 10 16 20 25 32 20M25 20M32 20M36 32M36 32M40 32M50 32M63 100 1 10 .01 1,000 E I2T (Amp2 Seconds) PreTotal At Arcing 415V 1.3 4.6 8 27 29 100 120 400 120 470 260 1070 560 2300 710 3000 570 2350 770 3000 1150 5000 1150 5000 1500 6000 2700 8700 5000 13,550 Total At 550V 5 30 115 490 730 1700 3550 5000 — — — — — — — Nom Watts Loss 0.9 1.4 1.8 2.1 1.8 1.8 2 2.9 1.2 0.95 0.88 2.4 1.9 1.4 1.0 Dimensions (Inches/mm) Rated Voltage A B 550AC 34.6 .54 13.8 415AC 34.6 D E F N 58.5 12.7 .03 .8 .14 3.5 .69 17.5 The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-28-98 SB98107 Rev. A Form No. NSD Page 1 of 1 BIF Doc #4100