Ordering number : ENN*6282 LC99350 2/5-Inch Frame Transfer CCD 1.1M Pixel Color Image Sensor Preliminary Overview The LC99350 is a low-cost frame transfer CCD (chargecoupled device) solid-state imaging element that features 1.1M pixels in a 2/5-inch optical size. It supports both progressive scan readout of all 1296 × 846 pixels as well as a real-time monitor mode with data compressed by 1/3. • Consists of a 1392 × 888-pixel imaging block and a 1392 × 296-pixel storage block • Three-phase drive used for the imaging and storage blocks, and 2-phase drive for the horizontal transfer block • Built-in high-sensitivity output amplifier Applications Package Dimensions PC cameras, TV telephones, image input units, and digital still cameras unit: mm 3250 Features 2.0 1.49 1.075 14.3 2.04 10.16 0.7 2.54 Sensor 7.62 Glass 1.2 Resin 11.8 Progressive scan readout Real-time compressed-data monitor mode Variable speed electronic shutter Horizontal dual readout adopted (Since the even and odd pixels on a single horizontal line are read out in two operations, a line memory is required for signal processing.) 3.7 1.0 • • • • [LC99350] R0.6 R0.5 Optical Center 7.15 R0.25 R0.3 Image Sensor Element Structure • Effective pixels [Total pixels]: 1296 × 864 [1392 × 888] (H×V) • Number of optical blacks: Horizontal: 84 at the front, 12 at the rear Vertical direction: 12 at the top, 12 at the bottom • Dummy bits: Horizontal: 6 pixels • Unit cell size: 4.5 µm × 4.5 µm (H×V) • Primary color mosaic filters (RGB) • Parallel gate CCD sensor Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O1899RM (OT) No. 6282-1/5 LC99350 Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Supply voltage Load gate voltage Ratings Unit VDD, VRD VPW = 0 V Conditions –0.3 to +15 V VGG VPW = 0 V –0.3 to +3 V N substrate p-well voltage NSUB–PW: VPW = 0 V –0.3 to +35 V N substrate imaging and storage block voltage NSUB–PI1 to PI3, PS1 to PS3: VPW = 0 V –0.3 to +35 V Horizontal block clock and reset gate voltage Horizontal clock pin and PR: VPW = 0 –0.3 to +15 V Clock voltage Clock pins other that the above: VPW = 0 –15 to +15 V Pins other than the above Pin voltage –0.3 to +10 V Operating temperature Topr –10 to +60 °C Storage temperature Tstg –30 to +80 °C Block diagram Optical black area VPW 1 PI3 2 PI2 3 PI1 4 TG1 5 12 pixels 18 NSUB Imaging block 12 pixels 84 pixels 12 pixels PR 17 PS1 16 PS2 6 Storage block 15 PS3 14 TG2 VRD 7 VDD 8 Output block Horizontal shift register (CCD) 13 PH1 12 PH2 6 dummy bits 11 VOG VOUT 9 10 VGG A12670 No. 6282-2/5 LC99350 Pixel Arrangement Optical black area Optical black area (84 pixels) (12 pixels) Optical black area (12 pixels) 1293 1295 1294 1296 1 2 3 4 G R G R G R G R B G B G B G B G Imaging area Effective pixels: 1296 × 864 (H×V) G R G R G R G R B G B G B G B G Optical black area (12 pixels) Storage block Total pixels: 1392 × 296 (H×V) Dummy bits (6 pixels) Horizontal shift register (1392 pixels) A12671 No. 6282-3/5 LC99350 Pin Arrangement PI3 VPW NSUB PS1 PS2 PI2 PS3 PI1 TG2 TG1 PH1 PR PH2 VRD VDD VOUT VGG VOG A12672 Pin Functions Pin No. Symbol 1 VPW 2 PI3 3 PI2 4 PI1 5 TG1 6 PR 7 Function P-well Imaging block clock Pin No. Symbol 18 NSUB 17 PS1 Function N substrate 16 PS2 15 PS3 Storage block clock Transfer gate 14 TG2 Reset gate 13 PH1 VRD Reset drain 12 PH2 8 VDD Supply voltage 11 VOG CCD output gate 9 VOUT CCD output 10 VGG Load gate Transfer gate Horizontal block clock No. 6282-4/5 LC99350 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products (including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification” for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 1999. Specifications and information herein are subject to change without notice. PS No. 6282-5/5