E-Series I/Q Demodulator 824 - 869 MHz EKIN2-846D V3.00 SM-7-1 Features ● ● ● Excellent Phase and Amplitude Balance LO Power: +10 dBm Typical Surface Mount Specifications @ 25°C Frequency Range LO / RF I/Q 824 - 869 MHz DC - 45 MHz Amplitude Unbalance Maximum 1.5 dB Phase Unbalance Maximum 5° Isolation LO to RF Minimum 40 dB Conversion Loss Maximum 9.5 dB (LO) Carrier Power +10 ±1 dBm Q = I -90° for RF > LO Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) Operating Characteristics Operating Temp. -10°C to +70°C Storage Temp. -40°C to +85°C Impedance 50 Ohms Nominal RF Power (1dB Compression) 4 dBm Maximum DC Offset Voltage 6 mV Typical Pin Configuration Function Pin. No. LO Ordering Information Part No. EKIN2-846D Packaging Tube 1 RF 8 I 5 Q 6 Case Ground 2,3,4,7 S 0705 B Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 Powered by ICminer.com Electronic-Library Service CopyRight 2003 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020