E-Series I/Q Modulator 380 - 400 MHz EKIN2-390D V3.00 SM-28 Features ● ● ● Excellent Phase and Amplitude Balance LO Power: +10 dBm Typical Surface Mount Specifications @ 25°C Frequency Range LO / RF I/Q 380 - 400 MHz DC - 5 MHz Amplitude Unbalance Typical 0.3 dB Maximum 0.5 dB Phase Unbalance Typical 1.0° Maximum 1.5° Isolation LO to RF LO to I/Q1 Typical 55 dB 42 dB Minimum 40 dB 40 dB Conversion Loss Typical 7.8 dB Maximum 9.0 dB (LO) Carrier Power +10 ±1 dBm DC Offset Voltage 1mV Typical Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (.x = ±0.50) .xxx = ±0.010 (.xx = ±0.25) Operating Characteristics Operating Temp. -10°C to +70°C Storage Temp. -40°C to +85°C Impedance 50 Ohms Nominal RF Power (1dB Compression) 4 dBm Maximum 1. With use of recommended Diplex Filters, the LO to I/Q isolation becomes 70 dB. Ordering Information Part No. EKIN2-390D EKIN2-390DTR Package SM-28 in Tubes SM-28 in Forward Tape & Reel Pin Configuration Function Pin No. LO 1 RF 8 I 5 Q 6 Case Ground 3,4,7 Not Connected 2 Specifications Subject to Change Without Notice. S 0888 A, S 1135 A M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020