Six-Way Power Splitter/Combiner DS56-0002 DS56-0002 Preliminary Specifications Low Cost Six-Way Power Splitter/Combiner 1700 - 2000 MHz Features • • • • • • SOW-16 Pin 16 Small Size, Low Profile Industry Standard SOW-16 SMT Plastic Package Superior Repeatability Insertion Loss: 1.1 dB Typical Isolation: 22 dB Typical Low Cost Orientation Mark Pin 1 .0926-.1043 (7.40-7.60) .3977-.4133 (10.10-10.50) -A- Description M/A-COM’s DS56-0002 is an IC-based monolithic power divider in a low cost SOW-16 -lead plastic package. This 6-way power divider is ideally suited for applications where small size, low profile and low cost, without sacrificing performance, are required. Typical applications include base stations, portables and PCMCIA cards for wireless standards such as DCS-1800, PCN, PCS, DECT and PHS. Available in tape and reel. .394-.419 (10.00-10.65) .010(0.25) M B M -B- .010-.029 x 45 Chamfer (0.25-0.75) 0-8 .004 (0.10) -C- 0.050(1.27) BSC. .0040-.0118 (0.10-0.30) .016-.050 (0.40-1.27) .013-.020 TYP (0.33-0.51) .010(0.25) M C A M B S .0091-.0125 (0.23-0.32) 16-Lead SOP outline dimensions Wide body (.300) (All dimensions per JEDEC No. MS-013-AA, Issue C) Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = 0.010 (.xx = 0.25) .xx = 0.02 (.x = 0.5) The DS56-0002 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Ordering Information Part Number DS56-0002 DS56-0002-TR DS56-0002-RTR Package SOW 16-Lead Plastic Package 1 Forward Tape and Reel 1 Reverse Tape and Reel 1. If specific reel size is required, consult factory for part number assignment. 1 Typical Electrical Specifications , TA= +25ºC Parameters Insertion Loss Isolation VSWR Amplitude Balance Phase Balance Units dB dB — dB ° Min. — 18 — — — Typ. 1.2 22 1.4:1 0.5 8° Max. 1.5 — 1.8:1 1.0 15° 1. All specifications apply with a 50-ohm source and load impedance. V1.B M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. The Preliminary Specifications Data Sheet contains typical electrical specifications which may change prior to final introduction. Six-Way Power Splitter/Combiner DS56-0002 1 3 Absolute Maximum Ratings Parameter Functional Diagram Absolute Maximum GND 1 2 1W CW Input Power Operating Temperature -40°C to +85°C Storage Temperature -65°C to 150°C 1. Exceeding these limits may cause permanent damage. 2. With internal load dissipation of 0.125 W maximum. R F 3 (O U T ) 2 R F 4 (O U T ) 15 GND 3 GND 14 R F 2 (O U T ) 4 R F 5 (O U T ) 13 GND 5 Recommended PCB Configuration (Dimensions in Inches) GND 12 R F 6 (O U T ) 11 R F 1 (O U T ) 6 mm GND 7 GND 10 R F IN 8 GND 9 .428 .016 D IA. PLAT ED T HR U (21X) .335 .067 T YP. GND 16 RF 3 RF 4 RF 2 RF 5 RF 1 RF 6 3. Pins 1, 3, 5, 7, 9, 10, 12, 14 and 16 must be DC and RF grounded. .030 T YP. R F IN .041 .050 D IA. PLAT ED T HR U (3X) C IR CU IT M AT ER IAL: FR -4 .016 TH ICK .093 T YP. Typical Performance @ +25°C VSWR vs. Frequency 2.0 1.8 -0.5 VSWR INSERTION LOSS (dB) Insertion Loss vs. Frequency 0.0 -1.0 -1.5 1.6 Input 1.4 Output 1.2 -2.0 1700 1750 1800 1850 1900 1950 2000 1.0 1700 1750 1800 1850 1900 1950 2000 FREQUENCY (MH z) FREQUENCY (MH z) Isolation vs. Frequency ISOLATION (dB) 0 -10 -20 -30 -40 1700 1750 1800 1850 1900 1950 2000 FREQUENCY (MH z) V1.B M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. The Preliminary Specifications Data Sheet contains typical electrical specifications which may change prior to final introduction.