ITI7004G2-LC 2 Gbit Fibre Channel Quad Adapter KEY APPLICATIONS • Storage Area Networks (SANs) • Cluster environments The ITI7004G2-LC quad adapter builds high availability cluster environments with redundant connections and allows for lower latency and less system cost. • High-end servers • RAID • JBOD connect EXPAND THE CAPABILITIES OF YOUR ENTERPRISE S T O R A G E E N V I R O N M E N T W I T H M U LT I P L E S A N C O N N E C T I O N S • Remote storage attach Designed for the most I/O intensive applications and for maximum connectivity of multiple storage subsystems, LSI Logic introduces the ITI7004G2-LC Quad PCI-to-Fibre Channel adapter. This adapter is designed with four, 2 Gbit Fibre Channel ports in a PCI short card form factor saving you valuable PCI slots and providing multiple direct connections for failover environments. The ITI7004G2-LC adapter is the highest density module in the industry with direct connectivity to up to four fibre loops. This allows you to connect to 126 devices on each loop for multiple storage subsystems connection. The ITI7004G2-LC supports switched fabric and direct attach loop topologies and supports all major operating systems. FEATURES • Four independent, 2 Gbit channels (up to 400 MBps, full duplex) • Auto-negotiation for legacy connect (1or 2 Gbit) • 64-bit, 66 MHz host PCI bus (backwards compatible with 32-bit and 33 MHz buses) • Multi-mode optics • Concurrent SCSI and IP protocol • Supports target mode and SCSI initiator, concurrently The ITI7004G2-LC hosts two of LSI Logic’s LSIFC929, 2 Gbit controllers, the highest performance dual channel controller available on the market. This innovative controller incorporates LSI Logic’s Fusion-MPT or maximum performance with minimum host overhead. Fusion-MPT technology utilizes three on-chip ARM processors achieving up to 66,000 I/O operations per second per chip, for a maximum of 132,000 I/Os per second for the adapter. ® • FC-Tape support • Supports all major operating systems FUSION-MPT ARCHITECTURE ® • 5 year limited warranty Based on industry standard ARM technology, the LSI Logic 2 Gbit product family incorporates Fusion-MPT architecture, a single binary device driver for Fibre Channel, SCSI and emerging interface technologies such as InfiniBand, Serial ATA and others. Thinner drivers allow for better and more versatile performance while adding value at the firmware level. Fusion-MPT provides the flexibility and rich feature set to make options like Integrated Mirroring possible for boot volume protection at no additional cost. • SNIA HBA API compliant ITI7004G2-LC ORDERING INFORMATION • CIM based server management • Fusion-MPT™ architected • SANmark™ approved ITI7004G2-LC LC, SFF, multi-mode optics NOTE: Switch, loop, and point-to-point topologies are supported. ITI7004G2-LC 2 Gbit Fibre Channel Quad Adapter 2 GB 2 GB 2 GB For more information please visit the LSI Logic web site at: Flash Optical Interface SFP LSIFC929 Optical Interface SFP Optical Interface SFP Optical Interface SFP LSIFC929 Serial EEP ROM Serial EEP ROM LEDs SSRAM http://storageio.lsilogic.com SSRAM LSI Logic Corporation SSRAM Flash 2 GB PCI-X Bridge North American Headquarters Milpitas, CA SSRAM Tel: 866 574 5741 Host Adapter Group Southborough, MA The highest density module available today with 4 channels on a small PCI short card form factor- 4.2” x 6.875”. Tel: 888 429 0425 FAX: 508 485 0303 LSI Logic Europe Ltd. Technical Specifications European Headquarters Data Transfers 400 MBps per channel, full-duplex Protocols SCSI, IP Topology Point-to-point, arbitrated loop, switched fabric (FL-port, F-port) Tel: 44 1344 426544 Class of Service Class 2, Class 3 Fax: 44 1344 481039 Compliance ANSI Fibre Channel Standards: FC-PH, FC-AL2, FC-FCP, FC-PLDA, FC-FLA, FCA-IP, IETF-IPFC, FC-Tape PCI 2.2 and 99 compliant LSI Logic KK Headquarters Size 6.875” x 4.2” Tel: 81 3 5463 7165 PCI Form Factor Short card, PCI 2.2, MD2 Fax 81 3 5463 7820 PCI Bus 64-bit, 66 MHz max (backwards compatable with 32-bit, 33 MHz buses) PCI Modes Bus Master DMA PCI Card Types Universal add-in card (3.3 V and 5.5 V signaling) PCI Voltage +5 V ±5% (1.7 A max) PCI Power 7.5 W Bracket Standard height United Kingdom Tokyo, Japan ISO 9000 Certified External Connectors LC, multi-mode optics, SFF Agency Approvals CE, VCCI, Canada, C-Tick, FCC class B, UL 94VO Environments Operating Temperature 0°C to 55°C -40°C to +85°C Relative Humidity 5 to 90% non-condensing 0 to 90% non-condensing Max Dew Point +32°C MTBF = 87,600 hours or 10 years, which ever comes first Storage The LSI Logic logo design and Fusion-MPT are trademarks or registered trademarks of LSI Logic Corporation. ARM is a registered trademark of Advanced RISC Machines Limited, used under license. All other brand and product names may be trademarks of their respective companies. LSI Logic Corporation reserves the right to make changes to any products and services herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase, lease, or use of a product or service from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or of third parties. Copyright ©2001 by LSI Logic Corporation. All rights reserved. Order No. S20048 7/01-1M – Printed in USA 2