SEMISTACK - SKAI Circuit Irms Vdc Types B6CI 400 450 SKAI 4001GD06 1452 W Symbol Conditions Irms1) no overload, Tcoolant= 50°C, 10kHz, p.f.=0,8 overload, t<20s VCES SKAI Solutions 600V IGBT Advanced Drive System SKAI 4001GD06 1452 W SemiKron Advanced Integration (SKAI) module Liquid-cooled version Preliminary Data VCEO rCE VCEsat EON + EOFF VTO rT VF=VEC EON + EOFF Rthjs2) Rthjs2) Rthsa2) PaDR Features • New generation 600V NPT IGBT on AlN DCB substrate. • Integrated DC-link film capacitor • Pressure contact technology for improved power cycling performance • Optimal thermal management with integrated liquid-cooled heatsink • Two integrated current sensors with option to include three • Integrated gate drive and power supply with under-voltage protection. 25-pin DB connector is standard on driver only versions • Option to include an integrated controller based on TMS320LF2407ADSP. 14-pin AMP SEAL connector is standard on controller versions. Typical Applications • • • • Vehicles Hybrid vehicles Motor Drives Regenerative Drives Ceqvl VDCmax Vs Is dV/dt fSWmax Visol Tvj Tstg Tamb ITRIPSC TTRIP UDCTRIP IGBT Tj= 125°C Tj= 125°C 400A, Tj= 25 / 125 °C Vcc= 300/400V, Ic= 400A, Tj= 125°C Inverse diode Tj= 125°C Tj= 125°C 400A, Tj= 25 / 125 °C Vcc= 300/400V, Ic= 400A, Tj= 125°C Thermal Characteristics / Heatsink per IGBT per diode Heatsink to coolant3), flow rate Vl= 15 l/min Heatsink to coolant3), flow rate Vl= 5 l/min Pressure drop, Coolant flow rate Vl= 5 l/min Pressure drop, Coolant flow rate Vl= 15 l/min Capacitor bank total equivalent capacitance max. DC voltage applied to capacitor bank Driver Power supply: typ value Power supply: min / max values Supply current Primary to Secondary Side Max. Switching Frequency power terminals to heatsink and signal connector: AC, 1 min. Junction temperature (not including driver) Storage Temperature Operating ambient temperature Protection Short Circuit Protection Over-Temp. Protection VCC Overvoltage Protection Dimensions LxWxH Length x Width x Height w approx. Values Units 400 500 600 A A V 1 2,75 1,9 / 2,1 27 / 38 V mΩ V mJ 0,81 1,65 1,46 / 1,47 10 / 13,0 V mΩ V mJ 0,065 0,13 9,3 13,4 0,05 0,55 K/W K/W K/kW K/kW bar bar 1 450 mF V 24 8 / 30 500 15 20 V V mA kV/µs kHz 2500 V -40...+150 -40...+125 -40...+85 °C °C °C 1000 115 458 A °C V 400 x 215 x 100 8,2 mm kg 1) Contact SEMIKRON for power loss calculations 2) "s" referenced to built-in Temp. Sensor 3) 50% Water, 50% Glycol SKAI 2 Power Electronic Systems – SEMISTACK 03-03-2005 © by SEMIKRON SEMISTACK - SKAI SKAI 4001GD06 1452 W: General dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON 03-03-2005 Power Electronic Systems – SEMISTACK 3