DC/DC SURFACE MOUNT GATE DRIVE TRANSFORMERS For SELV Operation 1500 VDC isolation between Gate and Drive Basic insulation (1.4 mm creepage/clearance) and operational available Operating frequency: 50 kHz and up Electrical Specifications @ 25°C — Operating Temperature -40°C to 130°C Part Number Turns Ratio Pri-Sec Insulation (VDC) MAX 1 V*µsec Primary Inductance (µH MIN) Leakage 2 Inductance (µH MAX) DCR Primary (Ω MAX) DCR Secondary (Ω MAX) MAX Package Size (L x W) (mm) Package Height (mm MAX) 0.60 2.00 1.60 0.75 0.52 2.00 1.60 0.75 8.6 x 6.7 8.0 x 6.6 9.0 x 8.6 8.6 x 6.7 2.5 5.3 7.6 3.6 0.80 0.62 0.88 1.50 0.80 0.88 0.62 1.50 7.2 x 6.1 11.8 x 8.8 11.8 x 8.8 9.0 x 8.6 3.8 4.0 4.0 7.6 OPERATIONAL INSULATION PE-68386 1:1 1500 9.7 785 0.36 P0926 1:1:1 1500 23.8 330 0.40 P0544 1:1:1 1500 45.1 3950 0.70 PA0264 1:1:1 1500 12.7 1140 0.40 BASIC INSULATION (1.4 MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY) P2033 1:1 1500 9.3 600 12.30 PA0173 1:1:1 1500 17.2 980 0.75 PA0185 1:1 1500 17.2 980 0.75 PA0184 1:1 1500 27.2 1400 0.50 NOTES: 1. The maximum volt-µsec rating limits the peak flux density to 2200 Gauss when used in a unipolar drive application. For bi-polar drive applications a maximum volt-µsec of two times this rating is acceptable (ie: 2* (volt*µsec rating)) Volt*µsec = (voltage applied to the primary) * dutycycle / Frequecy = V * alpha / Freq_Hz = V * usec 2. The leakage inductance is measured at the primary terminals with all secondaries shorted. 3. Add suffix "T" to part number for Tape and Reel package (ie: P0544T) Mechanical Schematic PE-68386 .340 MAX 8,64 PE-68386 Date Code Country of Origin .050 1,27 4X .100 2,54 .265 MAX 6,73 .098 MAX 2,49 .005/0,13 4 SURFACES 1 6 3 4 .200 5,08 .060 1,52 .100 2,54 .225 5,71 SUGGESTED PAD LAYOUT Weight . . . . . . . . . . . . . .0.28 grams Tape & Reel . . . . . . . . . . .1500/reel Tube . . . . . . . . . . . . . . . . . .60/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 49 PC500.B (5/02) DC/DC SURFACE MOUNT GATE DRIVE TRANSFORMERS For SELV Operation Mechanicals Schematics P0926 6 .073 1,85 .146 3,71 .024 6X 0,61 P0926 Date Code Country of Origin 4 .073 1,85 .050 6X 1,27 .050 6X 1,27 1 2 .330 8,38 1 5 3 6 4 3 SUGGESTED PAD LAYOUT .315 MAX 8,00 Weight . . . . . . . . . . . . . .0.48 grams Tape & Reel . . . . . . . . . . .1000/reel Tube . . . . . . . . . . . . . . . . . .80/tube .210 MAX 5,33 .060 1,52 .005/0,13 6 SURFACES 3 .260 MAX 6,60 2 4 1 6 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 5 P0544/PA0184 P0544 .050 1,27 .355 MAX 9,02 3X .100 2,54 8 7 6 5 .340 MAX 8,64 5 2 .300 MAX 7,62 3 5 .300 7,62 1 .100 2,54 4 6 4 8 .060 1,52 P0544/PA0184 Date Code Country of Origin 1 1 4 8 1 .225 5,71 SUGGESTED PAD LAYOUT .005/0,13 6 SURFACES 3 PA0184 4 5 8 Weight . . . . . . . . . . . . . .0.60 grams Tape & Reel . . . . . . . . . . . .400/reel Tube . . . . . . . . . . . . . . . . . .50/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com PC500.B (5/02) 50 DC/DC SURFACE MOUNT GATE DRIVE TRANSFORMERS For SELV Operation Mechanicals Schematics PA0264 2 .340 MAX 8,64 1 2 3 1 6 P0264 Date Code Country of Origin 5 .265 MAX 6,73 4 6 .200 5,08 .100 2,54 4 .070 1,78 4X .100 2,54 .220 5,59 .320 8,13 .140 MAX 3,56 .005/0,13 SUGGESTED PAD LAYOUT 6 SURFACES 5 3 Weight . . . . . . . . . . . . . .0.23 grams Tape & Reel . . . . . . . . . . . .800/reel Tube . . . . . . . . . . . . . . . . . .75/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 P2033 .310 7,87 .280 7,11 .235 5,97 P2033 Date Code Country of Origin (.150 3,81( .035 0,89 SUGGESTED PAD LAYOUT .140 3,57 8 SURFACES ( .150 3,81 PA0173, PA0185 PA0173 .460 11,68 .340 8,64 PA0XXX Date Code Country of Origin 7 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .004/0,10 ( 4 Weight . . . . . . . . . . . . . .0.29 grams Tape & Reel . . . . . . . . . . .1200/reel Tube . . . . . . . . . . . . . . . . . .80/tube .010 0,25 (.050 1,27( 8 (.050 1,27( .180 4,57 8X .035 0,89 1 .430 10,92 .330 8,38 .070 1,78 .100 2,54 1 2 5 3 6 4 .250 6,35 .100 2,54 .025 0,64 .330 8,38 SUGGESTED PAD LAYOUT .160 MAX 4,06 .250 6,35 1 PA0185 6 4 3 Weight . . . . . . . . . . . . . .0.48 grams Tape & Reel . . . . . . . . . . . .900/reel Tube . . . . . . . . . . . . . . . . . .60/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .005/0,13 6 SURFACES US 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 51 PC500.B (5/02)