Part Number: www.SunLED.com ZURMG56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP Features z 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Operating Characteristics (TA=25°C) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 627 565 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 625 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 45 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 15 pF 5 5 V Forward Current IF 30 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 160 140 mA Power Dissipation PT 75 62.5 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 ZURMG56W Emitting Color Red Green Published Date : FEB 25, 2008 Unit MG (GaP) VR Part Number MG (GaP) UR (GaAsP/ GaP) Reverse Voltage Storage Temperature UR (GaAsP/ GaP) Emitting Material GaAsP/GaP GaP °C Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA1453 Wavelength nm λP min. typ. 4 11 627 4 11 565 V7 Checked : B.L.LIU Viewing Angle 2 θ 1/2 140° P.1/5 Part Number: www.SunLED.com ZURMG56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP UR Published Date : FEB 25, 2008 Drawing No : SDSA1453 V7 Checked : B.L.LIU P.2/5 Part Number: www.SunLED.com ZURMG56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP MG Published Date : FEB 25, 2008 Drawing No : SDSA1453 V7 Checked : B.L.LIU P.3/5 Part Number: www.SunLED.com ZURMG56W 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25, 2008 Drawing No : SDSA1453 V7 Checked : B.L.LIU P.4/5 Part Number: www.SunLED.com 3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 25, 2008 ZURMG56W Drawing No : SDSA1453 ZURMG56W V7 Checked : B.L.LIU P.5/5