Part Number: www.SunLED.com ZM2BB90W 4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Features ●4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm THICKNESS. ●LOW POWER CONSUMPTION. ●WIDE VIEWING ANGLE. ●IDEAL FOR BACKLIGHT AND INDICATOR ●VARIOUS COLORS AND LENS TYPES AVAILABLE. ●PACKAGE: 2000PCS/REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) M2BB (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 100 mA Power Dissipation PT 111 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Electrostatic Discharge Threshold (HBM) Part Number ZM2BB90W Emitting Color Blue Published Date : FEB 26,2008 1000 Emitting Material InGaN °C V Lens-color Water Clear Drawing No :SDSA6416 M2BB (InGaN) Unit Forward Voltage (Typ.) (IF=20mA) VF 3.2 V Forward Voltage (Max.) (IF=20mA) VF 3.7 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 458 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 465 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 22 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 110 pF Luminous Intensity (IF=20mA) mcd min. typ. 110 248 M V1 Wavelength nm λP Viewing Angle 2 θ 1/2 458 110° Checked : B.L.LIU P. 1/4 Part Number: www.SunLED.com ZM2BB90W 4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP M2BB Published Date : FEB 26,2008 Drawing No :SDSA6416 M V1 Checked : B.L.LIU P. 2/4 Part Number: www.SunLED.com ZM2BB90W 4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 26,2008 Drawing No :SDSA6416 M V1 Checked : B.L.LIU P. 3/4 Part Number: www.SunLED.com 4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 26,2008 ZM2BB90W Drawing No :SDSA6416 ZM2BB90W M V1 Checked : B.L.LIU P. 4/4