ZFAMYK10A2 Part Number: www.SunLED.com SURFACE MOUNT DISPLAY Features z0.4 INCH CHARACTER HEIGHT. zLOW CURRENT OPERATION. zHIGH CONTRAST AND LIGHT OUTPUT. zCATEGORIZED FOR LUMINOUS INTENSITY. zMECHANICALLY zGRAY FACE, WHITE SEGMENT. zPACKAGE :250PCS / REEL. zMOISTURE zRoHS RUGGED. SENSITIVITY LEVEL : LEVEL 4. COMPLIANT. Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The gap between the reflector and PCB shall not exceed 0.25mm. Absolute Maximum Ratings (TA=25°C) MYK (InGaAIP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 175 mA Power Dissipation PT 75 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZFAMYK10A2 Emitting Color Yellow Published Date : MAR 13,2008 mW Emitting Material InGaAlP °C Forward Voltage (Typ.) (IF=10mA) VF 1.95 V Forward Voltage (Max.) (IF=10mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 590 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 590 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 20 pF Luminous Intensity (IF=10mA) ucd min. typ. 12000 45490 Drawing No : SDSA5425 MYK Unit (InGaAlP) V3 Wavelength nm λP Description 590 Common Anode, Rt. Hand Decimal Checked : Shin Chi P.1/4 Part Number: www.SunLED.com ZFAMYK10A2 SURFACE MOUNT DISPLAY MYK Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 13,2008 Drawing No : SDSA5425 V3 Checked : Shin Chi P.2/4 Part Number: www.SunLED.com ZFAMYK10A2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15) Tape Specification (Units : mm) Published Date : MAR 13,2008 Drawing No : SDSA5425 V3 Checked : Shin Chi P.3/4 Part Number: www.SunLED.com ZFAMYK10A2 SURFACE MOUNT DISPLAY PACKING & LABEL SPECIFICATIONS Published Date : MAR 13,2008 ZFAMYK10A2 Drawing No : SDSA5425 V3 Checked : Shin Chi P.4/4