SUNLED ZFUY20C-A

Part Number:
www.SunLED.com
ZFUY20C-A
SURFACE MOUNT DISPLAY
PRELIMINARY SPEC
Features
● 0.8 INCH DIGIT HEIGHT.
● LOW CURRENT OPERATION.
● EXCELLENT CHARACTER APPEARANCE.
● I.C. COMPATIBLE.
● MECHANICALLY RUGGED.
● GRAY FACE,WHITE SEGMENT.
● PACKAGE : 200PCS / REEL.
● MOISTURE SENSITIVITY LEVEL : LEVEL 4.
● RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
4.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
V
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission (Typ.)
(IF=10mA)
λP
590
nm
Wavelength of Dominant
Emission (Typ.)
(IF=10mA)
λD
588
nm
Spectral Line Full Width At
Half-Maximum (Typ.)
(IF=10mA)
Δλ
35
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
20
pF
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
140
mA
Power Dissipation
PT
75
mW
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Published Date : FEB 28, 2008
1.95
2.5
Forward Current
Yellow
VF
VF
V
ZFUY20C-A
Forward Voltage (Typ.)
(IF=10mA)
Forward Voltage (Max.)
(IF=10mA)
5
Emitting
Color
Unit
Unit
VR
Part
Number
UY
(GaAsP/
GaP)
UY
(GaAsP/
GaP)
Reverse Voltage
Storage Temperature
Operating Characteristics
(TA=25°C)
Emitting
Material
GaAsP/GaP
°C
Luminous
Intensity
(IF=10mA)
ucd
min.
typ.
1200
4290
Drawing No : SDSA6446
Wavelength
nm
λP
Description
590
Common Cathode. Rt. Hand Decimal
V1
Checked : Shin Chi
P.1/4
Part Number:
www.SunLED.com
ZFUY20C-A
SURFACE MOUNT DISPLAY
™ UY
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 28, 2008
Drawing No : SDSA6446
V1
Checked : Shin Chi
P.2/4
Part Number:
www.SunLED.com
ZFUY20C-A
SURFACE MOUNT DISPLAY
™ Recommended Soldering Pattern (Units : mm;Tolerance:± 0.15)
™ Tape Specification (Units : mm)
Published Date : FEB 28, 2008
Drawing No : SDSA6446
V1
Checked : Shin Chi
P.3/4
Part Number:
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
Published Date : FEB 28, 2008
ZFUY20C-A
SURFACE MOUNT DISPLAY
Drawing No : SDSA6446
ZFUY20C-A
V1
Checked : Shin Chi
P.4/4