GP1S097HCZ0F GP1S097HCZ0F Gap : 2mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter ■ Description ■ Agency approvals/Compliance GP1S097HCZ0F is a compact-package, phototransistor output, transmissive photointerrupter, with opposing emitter and detector in a molding that provides non-contact sensing. The compact package series is a result of unique technology combing transfer and injection molding. This device has hole that passes through the base of the device, for assembly or fixing, and it has a wide gap. 1. Compliant with RoHS directive ■ Applications 1. General purpose detection of object presence or motion. 2. Example : printer, lens control for camera ■ Features 1. Transmissive with phototransistor output 2. Highlights : • Compact Size • Wide Gap 3. Key Parameters : • Gap Width : 2mm • Slit Width (detector side): 0.3mm • Package : 4.5×2.6×4.5mm 4. Lead free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A01201EN Date Jun. 30. 2005 © SHARP Corporation GP1S097HCZ0F ■ Internal Connection Diagram Top view 2 1 1 2 3 4 3 Anode Collector Emitter Cathode 4 ■ Outline Dimensions (Unit : mm) aʻ Top view (C0.4) 2.1 Center of light path ∗∗ (C0.3) ∗∗ a-aʼ section (0.3) Slit width 2.6 3.3 (0.75) 4.5 2 4.5 a (C0.3) +0 φ1.2−0.1 0.15+0.2 −0.1 ∗3.55 3 4 2 1 2.1±0.5 0.4 ∗2 • Unspecified tolerance : ±0.2mm • ( ) : Reference dimensions • The dimensions shown do not include those of burrs. Burr's dimensions : 0.15mm MAX. • ∗ The dimensions indicated by ∗ refer to those measured from the lead base. • ∗∗ The lead may be exposed at the shaded portion. Product mass : approx. 0.07g Plating material : SnCu (Cu : TYP. 2%) Country of origin Japan Sheet No.: D3-A01201EN 2 GP1S097HCZ0F ■ Absolute Maximum Ratings Parameter Forward current Input Reverse voltage Power dissipation Collector-emitter voltage Emitter-collector voltage Output Collector current Collector power dissipation Total power dissipation Operating temperature Storage temperature ∗1 Soldering temperature ∗ Symbol Rating IF 50 VR 6 P 75 VCEO 35 VECO 6 20 IC 75 PC 100 Ptot Topr −25 to +85 Tstg −40 to +100 Tsol 260 (Ta=25˚C) Unit mA V mW V V mA mW mW ˚C ˚C ˚C 1mm or more Soldering area 1 For 5s or less ■ Electro-optical Characteristics Parameter Forward voltage Input Reverse current Output Collector dark current Collector current Transfer Collector-emitter saturation voltage characRise time teristics Response time Fall time Symbol VF IR ICEO IC VCE(sat) tr tf Condition IF=20mA VR=3V VCE=20V VCE=5V, IF=5mA IF=10mA, IC=40μA VCE=5V, IC=100μA, RL=1kΩ MIN. − − − 100 − − − TYP. 1.2 − − − − 50 50 (Ta=25˚C ) MAX. Unit 1.4 V 10 μA 100 nA 400 μA 0.4 V 150 μs 150 μs Sheet No.: D3-A01201EN 3 GP1S097HCZ0F Fig.2 Power Dissipation vs. Ambient Temperature 60 120 50 100 Power dissipation P, Pc, Ptot (mW) Forward current IF (mA) Fig.1 Forward Current vs. Ambient Temperature 40 30 20 10 0 25 0 25 50 75 85 Ptot 80 75 P, Pc 60 40 20 15 0 −25 100 0 Ambient temperature Ta (˚C) 25 50 75 85 100 Ambient temperature Ta (˚C) Fig.3 Forward Current vs. Forward Voltage Fig.4 Collector Current vs. Forward Current 1.1 VCE =5V Ta =25˚C 1 0.9 25˚C 0˚C 25˚C 50˚C Collector current IC (mA) Forward current IF (mA) 100 75˚C 10 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 0 3 0 2 4 6 Forward voltage VF (V) Fig.5 Collector Current vs. Collector-emitter Voltage 10 12 14 16 18 20 Fig.6 Relative Collector Current vs. Ambient Temperature 120 3.3 Ta=25˚C 3 110 Relative collector current (%) 100 2.7 Collector current IC (mA) 8 Forward current IF (mA) IF =50mA 2.4 IF =40mA 2.1 1.8 IF =30mA 1.5 1.2 IF =20mA 0.9 IF =10mA IF =5mA 0.6 2 3 4 5 6 7 8 70 60 50 40 30 10 0 −25 0 1 80 IF=5mA VCE=5V IC=100% at Ta=25˚C 20 0.3 0 90 9 10 0 25 50 75 Ambient temperature Ta (˚C) Collector-emitter voltage VCE (V) Sheet No.: D3-A01201EN 4 GP1S097HCZ0F 0.2 Fig.8 Collector Dark Current vs. Ambient Temperature 106 IF =10mA IC =40μA 0.18 Collector dark current ICEO (A) Collector-emitter saturation voltage VCE (sat) (V) Fig.7 Collector-emitter Saturation Voltage vs. Ambient Temperature 0.16 0.14 0.12 0.1 0.08 VCE 20V 107 108 109 0.06 0.04 −25 0 25 50 1010 75 0 25 Ambient temperature Ta (˚C) Fig.9 Response Time vs. Load Resistance Response time (μs) 1 000 75 100 Fig.10 Test Circuit for Response Time VCE =5V IC =100μA Ta =25˚C VCC RL RD Output Input Output Input 100 50 Ambient temperature Ta (˚C) 10% tf tr ts tf td tr 90% td 10 ts 1 0.1 1 100 10 Load resistance RL (kΩ) Fig.11 Detecting Position Characteristics (1) Fig.12 Detecting Position Characteristics (2) 100 90 IF =5mA VCE =5V 90 80 0 80 L Relative collector current (%) Relative collector current (%) 100 70 60 50 40 30 20 10 IF =5mA VCE =5V 70 0 60 L 50 40 30 20 10 0 0 0 0.5 1 1.5 2 0 Shield moving distance L (mm) 0.5 1 1.5 2 Shield moving distance L (mm) Remarks : Please be aware that all data in the graph are just for reference and not for guarantee. Sheet No.: D3-A01201EN 5 GP1S097HCZ0F ■ Design Considerations ● Design guide 1) Prevention of detection error To prevent photointerrupter from faulty operation caused by external light, do not set the detecting face to the external light. 2) Position of opaque board Opaque board shall be installed at place 1.6mm or more from the top of elements. (Example) 1.6mm or more 1.6mm or more This product is not designed against irradiation and incorporates non-coherent IRED. ● Degradation In general, the emission of the IRED used in photointerrupter will degrade over time. In the case of long term operation, please take the general IRED degradation (50% degradation over 5 years) into the design consideration. ● Parts This product is assembled using the below parts. • Photodetector (qty. : 1) Category Material Maximum Sensitivity wavelength (nm) Sensitivity wavelength (nm) Response time (μs) Phototransistor Silicon (Si) 930 700 to 1 200 20 • Photo emitter (qty. : 1) Category Material Maximum light emitting wavelength (nm) I/O Frequency (MHz) Infrared emitting diode (non-coherent) Gallium arsenide (GaAs) 950 0.3 • Material Case Lead frame Lead frame plating Black polyphernylene sulfide resin (UL94 V-0) 42Alloy SnCu plating Sheet No.: D3-A01201EN 6 GP1S097HCZ0F ■ Manufacturing Guidelines ● Soldering Method Flow Soldering: Soldering should be completed below 260˚C and within 5 s. Please solder within one time. Soldering area is 1mm or more away from the bottom of housing. Please take care not to let any external force exert on lead pins. Please don't do soldering with preheating, and please don't do soldering by reflow. Hand soldering Hand soldering should be completed within 3 s when the point of solder iron is below 350̊C. Please solder within one time. Please don't touch the terminals directly by soldering iron. Soldered product shall treat at normal temperature. Other notice Please test the soldering method in actual condition and make sure the soldering works fine, since the impact on the junction between the device and PCB varies depending on the cooling and soldering conditions. ● Cleaning instructions Solvent cleaning : Solvent temperature should be 45˚C or below. Immersion time should be 3 minutes or less. Ultrasonic cleaning : Do not execute ultrasonic cleaning. Recommended solvent materials : Ethyl alcohol, Methyl alcohol and Isopropyl alcohol. ● Presence of ODC This product shall not contain the following materials. And they are not used in the production process for this product. Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform) Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all. This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC). •Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated diphenyl ethers (PBDE). Sheet No.: D3-A01201EN 7 GP1S097HCZ0F ■ Package specification ● Sleeve package Package materials Sleeve : Polystyrene Stopper : Styrene-Elastomer Package method MAX. 100 pcs. of products shall be packaged in a sleeve. Both ends shall be closed by tabbed and tabless stoppers. MAX. 50 sleeves in one case. Sheet No.: D3-A01201EN 8 GP1S097HCZ0F ■ Important Notices · The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii) SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). · Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. · If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. · Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection · This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. · Contact and consult with a SHARP representative if there are any questions about the contents of this publication. Sheet No.: D3-A01201EN [H137] 9