PEDD514260ESL-01 This version : Jan. 2001 Semiconductor MSM514260E/ESL Preliminary 262,144-Word x 16-Bit DYNAMIC RAM : FAST PAGE MODE TYPE DESCRIPTION The MSM514260E/ESL is a 262,144-word × 16-bit dynamic RAM fabricated in Oki’s silicon-gate CMOS technology. The MSM514260E/ESL achieves high integration, high-speed operation, and low-power consumption because Oki manufactures the device in a quadruple-layer polysilicon/double-layer metal CMOS process. The MSM514260E/ESL is available in a 40-pin plastic SOJ, 44/40-pin plastic TSOP. The MSM514260ESL (the Self-refresh version) is specially designed for lower-power applications. FEATURES • 262,144-word × 16-bit configuration • Single 5V power supply, ±10% tolerance • Input : TTL compatible, low input capacitance • Output : TTL compatible, 3-state • Refresh : 512 cycles/8 ms, 512 cycles/128 ms (SL version) • Fast page mode, read modify write capability • CAS before RAS refresh, hidden refresh, RAS-only refresh capability • CAS before RAS self-refresh capability (SL version) • Package options: 40-pin 400mil plastic SOJ (SOJ40-P-400-1.27) (Product : MSM514260E/ESL-xxJS) 44/40-pin 400mil plastic TSOP (TSOPII44/40-P-400-0.80-K) (Product : MSM514260E/ESL-xxTS-K) xx : indicates speed rank. PRODUCT FAMILY Family MSM514260E/ESL Access Time (Max.) Cycle Time Power Dissipation tRAC tAA tCAC tOEA (Min.) Operating (Max.) Standby (Max.) 60ns 30ns 15ns 15ns 110ns 633mW 70ns 35ns 20ns 20ns 130ns 578mW 5.5mW/ 1.1mW (SL version) 1/14 PEDD514260ESL-01 MSM514260E/ESL PIN CONFIGRATION (TOP VIEW) VCC 1 DQ1 2 DQ2 3 DQ3 4 DQ4 5 VCC 6 DQ5 7 DQ6 8 DQ7 9 DQ8 10 NC 11 NC 12 WE 13 RAS 14 NC 15 A0 16 A1 17 A2 18 A3 19 VCC 20 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 40-Pin Plastic SOJ VSS DQ16 DQ15 DQ14 DQ13 VSS DQ12 DQ11 DQ10 DQ9 NC LCAS UCAS OE A8 A7 A6 A5 A4 VSS VCC 1 DQ1 2 DQ2 3 DQ3 4 DQ4 5 VCC 6 DQ5 7 DQ6 8 DQ7 9 DQ8 10 44 43 42 41 40 39 38 37 36 35 VSS DQ16 DQ15 DQ14 DQ13 VSS DQ12 DQ11 DQ10 DQ9 NC 13 NC 14 WE 15 RAS 16 NC 17 A0 18 A1 19 A2 20 A3 21 VCC 22 32 31 30 29 28 27 26 25 24 23 NC LCAS UCAS OE A8 A7 A6 A5 A4 VSS 44/40-Pin Plastic TSOP (K Type) Pin Name Function A0 − A8 Address Input RAS Row Address Strobe LCAS Lower Byte Column Address Strobe UCAS Upper Byte Column Address Strobe DQ1 - DQ16 Data Input/Data Output OE Output Enable WE Write Enable VCC Power Supply (5V) VSS Ground (0V) NC No Connection Note : The same power supply voltage must be provided to every VCC pin, and the same GND voltage level must be provided to every VSS pin. 2/14 PEDD514260ESL-01 MSM514260E/ESL BLOCK DIAGRAM WE OE Timing Generator RAS I/O Controller LCAS UCAS I/O Controller 9 9 Row Address Buffers Output Buffers 8 Input Buffers 8 8 Input Buffers 8 8 Output Buffers 8 DQ1 - DQ8 Column Address Buffers 9 Internal Address Counter A0 - A8 8 Sense Amplifiers Refresh Control Clock 9 Row Decoders Column Decoders Word Drivers I/O Selector 16 16 DQ9 - DQ16 Memory Cells 8 VCC On Chip VBB Generator VSS FUNCTION TABLE Input Pin DQ Pin Function Mode RAS LCAS UCAS WE OE DQ1-DQ8 DQ9-DQ16 H * * * * High-Z High-Z Standby L H H * * High-Z High-Z Refresh L L H H L DOUT High-Z Lower Byte Read L H L H L High-Z DOUT Upper Byte Read L L L H L DOUT DOUT Word Read L L H L H DIN Don’t Care Lower Byte Write L H L L H Don’t Care DIN Upper Byte Write L L L L H DIN DIN Word Write L L L H H High-Z High-Z * : “H” or “L” 3/14 PEDD514260ESL-01 MSM514260E/ESL ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Parameter Symbol Rating Unit Voltage on Any Pin Relative to VSS VIN, VOUT −0.5 to VCC + 0.5 V Voltage VCC supply Relative to VSS VCC −0.5 to 7.0 V Short Circuit Output Current IOS 50 mA Power Dissipation PD* 1 W Operating Temperature Topr 0 to 70 °C Storage Temperature Tstg −55 to 150 °C *: Ta = 25°C Recommended Operating Conditions (Ta = 0°C to 70°C) Parameter Power Supply Voltage Input High Voltage Input Low Voltage Notes: Symbol Min. Typ. Max. Unit VCC VSS VIH VIL 4.5 5.0 5.5 V 0 0 0 V 2.4 VCC + 0.5*1 V −0.5 0.8 V *2 *1. The input voltage is VCC + 2.0V when the pulse width is less than 20ns (the pulse width is with respect to the point at which VCC is applied). *2. The input voltage is VSS − 2.0V when the pulse width is less than 20ns (the pulse width respect to the point at which VSS is applied). Capacitance (VCC = 5V ± 10%, Ta = 25°C, f=1MHz) Parameter Input Capacitance (A0 – A8) Input Capacitance (RAS, LCAS, UCAS, WE, OE) Output Capacitance (DQ1 – DQ16) Symbol Typ. Max. Unit CIN1 5 pF CIN2 7 pF CI/O 7 pF 4/14 PEDD514260ESL-01 MSM514260E/ESL DC Characteristics (VCC = 5V ± 10%, Ta = 0°C to 70°C) Parameter Symbol Condition Max 2.4 VCC 2.4 VCC V 0 0.4 0 0.4 V −10 10 −10 10 µA −10 10 −10 10 µA 115 105 mA 1,2 RAS, CAS = VIH 2 2 1 1 mA RAS, CAS ≥ VCC – 0.2V 1 200 200 µA 1,5 Output Low Voltage VOL IOL = 4.2mA ILO Average Power Supply Current (Operating) Power Supply Current (Standby) Average Power Supply Current (RAS-only Refresh) Power Supply Current (Standby) Average Power Supply Current (CAS before RAS Refresh) Average Power Supply Current (Fast Page Mode) Average Power Supply Current (Battery Backup) Average Power Supply Current (CAS before RAS Self-Refresh) Notes: 1. ICC1 ICC2 Note Min. IOH = −5.0mA Output Leakage Current Unit Max VOH ILI MSM514260 E/ESL-70 Min. Output High Voltage Input Leakage Current MSM514260 E/ESL-60 0V ≤ VI ≤ VCC+0.5V; All other pins not under test = 0V DQ disable 0V ≤ VO ≤ VCC RAS, CAS cycling, tRC = Min. ICC3 RAS cycling, CAS = VIH, tRC = Min. 115 105 mA 1,2 ICC5 RAS = VIH, CAS = VIL, DQ = enable 5 5 mA 1 ICC6 RAS = cycling, CAS before RAS 115 105 mA 1,2 ICC7 RAS = VIL, CAS cycling, tPC = Min. 115 105 mA 1,3 ICC10 tRC = 125µs CAS before RAS tRAS = 1µs 300 300 µA 1,4, 5 ICCS RAS ≤ 0.2V, CAS ≤ 0.2V, 300 300 µA 1,5 ICC Max. is specified as ICC for output open condition. 2. The address can be changed once or less while RAS = VIL. 3. The address can be changed once or less while CAS = VIH. 4. VCC − 0.2V ≤ VIH ≤ VCC + 0.5V, − 0.5V ≤ VIL ≤ 0.2V. 5. SL version. 5/14 PEDD514260ESL-01 MSM514260E/ESL AC Characteristic (1/2) (VCC = 5V ± 10%, Ta = 0°C to 70°C) Note1,2,3 MSM514260 E/ESL-60 MSM514260 E/ESL-70 Min. Max. Min. Max. tRC 110 130 ns tRWC 155 185 ns tPC 40 45 ns tPRWC 85 100 ns Access Time from RAS tRAC 60 70 ns 4,5,6 Access Time from CAS tCAC 15 20 ns 4,5 Access Time from Column Address tAA 30 35 ns 4,6 Access Time from CAS Precharge tCPA 35 40 ns 4,12 Access Time from OE tOEA 15 20 ns 4 Output Low Impedance Time from CAS tCLZ 0 0 ns 4 CAS to Data Output Buffer Turn-off Delay Time tOFF 0 15 0 15 ns 7 OE to Data Output Buffer Turn-off Delay Time tOEZ 0 15 0 15 ns 7 Transition Time tT 3 50 3 50 ns 3 Refresh Period tREF 8 8 ms Refresh Period (SL version) tREF 128 128 ms RAS Precharge Time tRP 40 50 ns RAS Pulse Width tRAS 60 10,000 70 10,000 ns RAS Pulse Width (Fast Page Mode) tRASP 60 100,000 70 100,000 ns RAS Hold Time tRSH 15 20 ns RAS Hold Time referenced to OE tROH 15 20 ns CAS Precharge Time (Fast Page Mode) tCP 10 10 ns CAS Pulse Width tCAS 15 10,000 20 10,000 ns CAS Hold Time tCSH 60 70 ns CAS to RAS Precharge Time tCRP 5 5 ns 12 RAS Hold Time from CAS Precharge tRHCP 35 40 ns 12 RAS to CAS Delay Time tRCD 20 45 20 50 ns 5 RAS to Column Address Delay Time tRAD 15 30 15 35 ns 6 Row Address Set-up Time tASR 0 0 ns Row Address Hold Time tRAH 10 10 ns Column Address Set-up Time tASC 0 0 ns 11 Column Address Hold Time tCAH 10 15 ns 11 Parameter Random Read or Write Cycle Time Read Modify Write Cycle Time Fast Page Mode Cycle Time Fast Page Mode Read Modify Write Cycle Time Symbol Unit Note 15 14 6/14 PEDD514260ESL-01 MSM514260E/ESL AC Characteristic (2/2) (VCC = 5V ± 10%, Ta = 0°C to 70°C) Note1,2,3 Parameter Symbol MSM514260 E/ESL-60 MSM514260 E/ESL-70 Min. Max. Min. Max. Unit Note Column Address to RAS Lead Time tRAL 30 35 ns Read Command Set-up Time tRCS 0 0 ns 11 Read Command Hold Time tRCH 0 0 ns 8,11 Read Command Hold Time referenced to RAS tRRH 0 0 ns 8 Write Command Set-up Time tWCS 0 0 ns 9,11 Write Command Hold Time tWCH 10 15 ns 11 Write Command Pulse Width tWP 10 10 ns OE Command Hold Time tOEH 15 20 ns Write Command to RAS Lead Time tRWL 15 20 ns Write Command to CAS Lead Time tCWL 15 20 ns 13 Data-in Set-up Time tDS 0 0 ns 10,11 Data-in Hold Time tDH 10 15 ns 10,11 OE to Data-in Delay Time tOED 15 20 ns CAS to WE Delay Time tCWD 40 50 ns 9 Column Address to WE Delay Time tAWD 55 65 ns 9 RAS to WE Delay Time tRWD 85 100 ns 9 CAS Precharge WE Delay Time tCPWD 60 70 ns 9 CAS Active Delay Time from RAS Precharge tRPC 5 5 ns 11 RAS to CAS Set-up Time (CAS before RAS) tCSR 10 10 ns 11 RAS to CAS Hold Time (CAS before RAS) tCHR 10 10 ns 12 RAS Pulse Width (CAS before RAS Self-Refresh) tRASS 100 100 µs 15 RAS Precharge Time (CAS before RAS Self-Refresh) tRPS 110 130 ns 15 CAS Hold Time (CAS before RAS Self-Refresh) tCHS − 40 − 50 ns 15 7/14 PEDD514260ESL-01 MSM514260E/ESL Notes: 1. A start-up delay of 200µs is required after power-up, followed by a minimum of eight initialization cycles (RAS-only refresh or CAS before RAS refresh) before proper device operation is achieved. 2. The AC characteristics assume tT = 5ns. 3. VIH (Min.) and VIL (Max.) are reference levels for measuring input timing signals. Transition times (tT) are measured between VIH and VIL. 4. This parameter is measured with a load circuit equivalent to 2 TTL load and 100pF. 5. Operation within the tRCD (Max.) limit ensures that tRAC (Max.) can be met. tRCD (Max.) is specified as a reference point only. If tRCD is greater than the specified tRCD (Max.) limit, then the access time is controlled by tCAC. 6. Operation within the tRAD (Max.) limit ensures that tRAC (Max.) can be met. tRAD (Max.) is specified as a reference point only. If tRAD is greater than the specified tRAD (Max.) limit, then the access time is controlled by tAA. 7. tOFF (Max.) and tOEZ (Max.) define the time at which the output achieved the open circuit condition and are not referenced to output voltage levels. 8. tRCH or tRRH must be satisfied for a read cycle. 9. tWCS, tCWD, tRWD, tAWD and tCPWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS ≥ tWCS (Min.), then the cycle is an early write cycle and the data out will remain open circuit (high impedance) throughout the entire cycle. If tCWD ≥ tCWD (Min.), tRWD ≥ tRWD(Min.), tAWD ≥ tAWD (Min.) and tCPWD ≥ tCPWD (Min.), then the cycle is a read modify write cycle and data out will contain data read from the selected cell; if neither of the above sets of conditions is satisfied, then the condition of the data out (at access time) is indeterminate. 10. These parameters are referenced to the UCAS and LCAS, leading edges in an early write cycle, and to the WE leading edge in an OE control write cycle, or a read modify write cycle. 11. These parameters are determined by the falling edge of either UCAS or LCAS, whichever is earlier. 12. These parameters are determined by the rising edge of either UCAS or LCAS, whichever is later. 13. tCWL should be satisfied by both UCAS and LCAS. 14. tCP is determined by the time both UCAS and LCAS are high. 15. Only SL version. 8/14 PEDD514260ESL-01 1Semiconductor MSM514260E/ESL Timing Chart • Read Cycle RAS tRC tRAS VIH tRP VIL tCSH tCRP CAS tRAD VIL WE OE VIH VIL tCRP tRSH tCAS VIH tRAL tASR Address tRCD tRAH tASC Row tCAH Column tRCS tRRH VIH tAA VIL tRCH tROH tOEA VIH VIL tCAC tRAC DQ tOFF tOEZ tCLZ VOH Valid Data-out Open VOL “H” or “L” • Write Cycle (Early Write) RAS tRC tRAS VIH tRP VIL tCSH tCRP CAS tRCD VIH tRAD VIL tRAL tASR Address WE OE DQ VIH VIL VIH tCRP tRSH tCAS tRAH tASC Row tCAH Column tCWL tWCS tWP tWCH VIL tRWL VIH VIL VIH VIL tDS Valid Data-in tDH Open “H” or “L” 9/14 PEDD514260ESL-01 1Semiconductor • MSM514260E/ESL Read Modify Write Cycle tRWC RAS tRAS VIH tRP VIL tCSH tCRP CAS tRSH tCAS VIH VIH VIL tCRP tRAD VIL tASR Address tRCD tRAH Row tASC tCWL tRWL tCAH Column tRCS tCWD tWP tRWD WE OE VIH VIL tAWD tAA tOEH tOEA VIH tOED VIL tCAC tRAC DQ VI/OH VI/OL tOEZ tCLZ Valid Data-out tDS tD Valid Data-in “H” or “L” 10/14 PEDD514260ESL-01 1Semiconductor • MSM514260E/ESL Fast Page Mode Read Cycle tRASP RAS VIH VIL tRCD tCRP CAS tCP VIH VIL VIH VIL tRAD tCSH tRAH tASC tCP Row tASC Column tCAH Column tRCH tRCS tRCH VIH VIL tAA tAA VIH VIL tRAC tCPA tOFF tOEZ tCLZ VOH tAA tOEA tCAC DQ tASC tRCS tRCH tCRP tRAL tCAH Column tOEA OE tRSH tCAS tCAS tCAH tRCS WE tRHCP tCAS tASR Address tRP tPC tCPA tOFF tCAC VOL tOFF tCAC tOEZ tCLZ Valid Data-out tRRH tOEA tOEZ tCLZ Valid Data-out Valid Data-out “H” or “L” • Fast Page Mode Write Cycle (Early Write) tRP tRASP RAS CAS tPC VIH VIL tCRP tCP VIH VIL tRAH tASC Row tCSH tCAH tASC Column tWCS VIH tWCH tWP tCRP tASC Column tRWL tCWL tCWL tWCS tRAL tCAH tWCH tWP tWCS tWP tWCH VIL tDS DQ tCAH Column tCWL WE tRSH tCAS tCAS tRAD VIL VIH tCP tCAS tASR Address tRCD tRHPC VIH VIL tD Valid Data-in tDS tD Valid Data-in tDS tD Valid Data-in Note: OE = “H” or “L” “H” or “L” 11/14 PEDD514260ESL-01 1Semiconductor • MSM514260E/ESL Fast Page Mode Read Modify Write Cycle tRASP RAS CAS tCSH VIH VIL tRCD VIL tCAH tCWL tASC Row tASC tRAL tCWL Column tCWD tRCS tCPWD tCWD tAWD tAWD tRCS tPWD tCWD tCPWD tCWL tRWL VIH tAWD VIL tWP tCPA tDH VIH tWP tD tCAC VI/OH tOEZ Out VI/OL tCLZ tCPA tAA tOEA tOED VIL In tD tDS tOEA tOED tOEZ tCAC tWP tROH tDS tAA tDS tOEA Out tOED tOEZ tCAC In Out In tCLZ tCLZ Note: Out = Valid Data-out, In = Valid Data-in • tCRP tCAH Column tAA DQ tCAS tASC Column tRAC OE tCP tCAS tRAD VIL VIH tRP tRSH tCAH tRCS WE tCP tCAS VIH tRAH tASR Address tPRWC “H” or “L” RAS-only Refresh Cycle tRC RAS tRAS VIH tRP VIL tCRP CAS Address DQ tRPC VIH VIL VIH VIL VOH VOL tASR tRAH Row tOFF Open Note: WE, OE = “H” or “L” “H” or “L” 12/14 PEDD514260ESL-01 1Semiconductor • MSM514260E/ESL CAS before RAS Refresh Cycle tRP RAS CAS tRC tRAS VIH VIL tRPC tCP tRP tCSR tRPC tCHR VIH VIL tOFF DQ VOH Open VOL “H” or “L” Note: WE, OE, Address = “H” or “L” • Hidden Refresh Read Cycle tRC RAS CAS VIH VIL tCRP tRCD tRSH tCHR tRAD VIL VIH VIL tRAH tASC tCAH Column Row tRCS WE tRP tRP VIH tASR Address tRC tRAS tRAS tCAC tRRH VIH tRAL VIL tAA tROH OE DQ VIH VIL VOH VOL tOFF tOEA tRAC tOEZ tCLZ Open Valid Data-out “H” or “L” 13/14 PEDD514260ESL-01 1Semiconductor MSM514260E/ESL Hidden Refresh Write Cycle tRC RAS CAS VIH VIL tCRP tRAS tRCD tRSH VIH OE DQ tRP tRAD VIL tRAL tRAH VIH tASC Row VIL tCAH Column tWCS WE tRP tCHR tASR Address tRC tRAS tWCH VIH VIL tWP VIH VIL tDS VIH tD Valid Data-in VIL “H” or “L” CAS before RAS Self-Refresh Cycle tRP RAS tRPS VIH VIL tRPC tCP CAS tRASS tRPC tCSR tCHS VIH VIL tOFF DQ VOH VOL Open Note: WE, OE, Address = “H” or “L” O S “H” or “L” 14/14