VCXO Page 1 of 3 VS9M: ANALOG MULTIPLIED LVPECL SERIES: ULTRA HF VCXO, LVPECL, +3.3 VDC DESCRIPTION: A crystal controlled, high frequency, highly stable oscillator, adhering to Low Voltage Differential Signaling (LVPECL) Standards. The output can be Tri-stated to facilitate testing or combined multiple clocks. The device is contained in a sub-miniature, very low profile, leadless ceramic SMD package with 6 gold contact pads. This miniature oscillator is ideal for today's automated assembly environments. APPLICATIONS AND FEATURES: " " " " " " $ Infiniband; Fiber Channel; SATA; 10GbE; Network Processors; SOHO Routing; Switches; Common Frequencies: 150 MHz; 156.25 MHz; 155.52 MHz; 161.1328 MHz; 212.5MHz; 312.5MHz, 622.080 MHz +3.3 VDC LVPECL Frequency Range from 750KHz to 800MHz Low Phase Noise Analog Multiplication Miniature Ceramic SMD Package Available on Tape and Reel Lead Free and ROHS Compliant " ABSOLUTE MAXIMUM RATINGS: PARAMETER Operating temperature range Storage temperature range Supply voltage Maximum Input Voltage Maximum Output Voltage $ SYMBOL Ta T(stg) Vcc Vi Vo VALUE UNIT -40…+85 -55…+90 +4.6 Vss-0.5…Vcc+0.5 Vss-0.5…Vcc+0.5 °C °C VDC VDC VDC ELECTRICAL PARAMETERS: PARAMETER Nominal Frequency Supply Voltage Supply Current Output Logic Type Load SYMB OL fo Vcc Is TEST CONDITIONS*1 VALUE UNIT MHz VDC mA Duty Cycle Voh Vol DC Connected between each output and Vcc – 2.0 VDC min max Measured at 50% of output voltage swing 0.75 to 800 +3.3 ±5% 100.0 MAX LVPECL 50 Vcc-1.025 Vcc-1.620 40/60 to 60/40 or 45/55 to 55/45 Rise / Fall Time tr / tf Measured at 20/80% and 80/20% output voltage swing 0.7 TYP 1.0 MAX*2 Overall conditions Integrated Phase tji RMS, Fj = 12 kHz…20 MHz5 ±50 *(note 7) 0.3 TYP** Output Voltage Levels Frequency Stability Integrated Phase RMS ti offset frequency 50KHz to 80MHz5 0.5 TYP** Jitter J Deterministic period Jitter Dj using wavecrest analyzer 4 Random period Jitter Rj using wavecrest analyzer 4 Acumm. Peak to Peak Jitter Tp-p using wavecrest analyzer*4 typ. @212.5MHz6 Fo<320MHz. Fo>320MHz. Fo<320MHz. Fo>320MHz. Fo<320MHz. Fo>320MHz. ∆f=10 Hz ∆f=100 Hz ∆f=1 KHz ∆f=10 KHz ∆f=100 KHz ∆f>1M Hz Fo<320MHz. Fo>320MHz. 6 TYP ** 18 TYP ** 2.5 TYP ** 2.5 TYP** 30 TYP** 43 TYP** -65 -95 -125 -140 -145 -148 -50 -35 0 to +3.3 +1.65 ± 0.25 Phase Noise,TYP £(∆f) Sub Harmonics, TYP f_sub Load, nom, Supply nom Control Voltage Range Settability VC Vfo Positive slope; 10% linearity MAX Absolute Pull Range APR Minimum guaranteed freq. pull over ∆f/fc, over all conditions See Part Numbering Input Impedance Modulation Bandwidth Enable High Option; Pin 2 Output Enabled Output Disabled Enable Low Option; Pin 2 Output Disabled Output Enabled Zin BW -3 dB 10 MIN 10 MIN En Dis High Voltage or No Connect Ground 0.7•Vcc MIN 0.3•Vcc MAX Dis En High Voltage Ground or No Connect 0.7•Vcc MIN 0.3•Vcc MAX RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: [email protected] ! WEB: http://www.raltron.com Ω VDC VDC % ns ppm ps ps ps ps ps dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc VDC VDC ppm KΩ KHz VDC VDC VDC VDC VCXO Page 2 of 3 *1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 ±3°C *2 Frequency Dependent *3 May not be Available With All Temperature Ranges or Frequencies — Please Consult Factory *4 Measured with Wavecrest SIA-3000A 10,000, Cycles no filtering *5 Calculated from Agilent 5500 phase noise measurements *6 Measured with Agilent 5500 *7 Tighter stabilities maybe available upon request – please consult factory $ PART NUMBERING SYSTEM: SERIES SYMMETRY VS9M: UHF +3.3Vdc VCXO with LVPECL Comp. Output A: 40/60 to 60/40% T: 45/55 to 55/45% TEMPERATURE RANGE (°C) R: S: U: V: 0…+50 0…+70 -20…+70 -40…+85 ABSOLUTE PULL RANGE FREQUENCY (MHz) K: ±20 ppm I: ±25 ppm F: ±32 ppm H: ±50 ppm G: ±80 ppm J: ±100 ppm*(note 3) 0.75…800.000 Enable/Disable Enable High – standard (Omit Suffix) EL; Enable Low EXAMPLE: VS9MASH -155.520 VCXO, 7x5mm Package, +3.3 VDC Supply Voltage, LVPECL Output, Standard Symmetry, 0…+70°C Operating Temperature Range, ±50 ppm APR, 25 ppm stability, 155.520 MHz MECHANICAL PARAMETERS: OUTLINE TOLERANCE: ±0.006” / 0.15mm (Unless otherwise specified) .197 ±.008 5.0 ±0.2 INDICATES PIN 1. .276 ±.008 7.0 ±0.2 .200 5.08 .100 2.54 1 2 5 .055 TYP. 1.40 MARKING: VS9MASH 155.52 RAL D/C .079 TYP. 2.00 TYP. 3 .150 3.81 6 PIN FUNCTIONS: [1] VOLTAGE CONTROL [2] ENABLE/ DISABLE, OR NO CONNECT [3] CASE GROUND [4] OUTPUT [5] COMP. OUTPUT [6] SUPPLY VOLTAGE .079 MAX. 2.00 MAX. .050 1.27 $ *0.01µ µF external by-pass .087 2.20 filter is recommended as seen on solder pattern. 4 .071 1.80 .100 2.54 SOLDER PATTERN RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: [email protected] ! WEB: http://www.raltron.com VCXO Page 3 of 3 ! REFLOW PROFILE: **ROHS COMPLIANT** RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: (305) 593-6033 ! fax: (305) 594-3973 ! e-mail: [email protected] ! WEB: http://www.raltron.com