FREQUENCY QEN4 DIL 8 Pin Half Size XO – Communications Equipment Application Specification (Rev-B) Electrical Characteristics ......................................................P01 Mechanical Characteristics ...................................................P02 Ordering Information .............................................................P02 Frequency QEN4 DIL 8 Pin Half Size XO – Communications Equipment Application January 05th, 2006 Specification (rev-B) Electrical Characteristics Electrical Parameters Frequency range Output logic Operating temperature range (see table 1) Storage temperature range Power supply voltage (Vcc) Frequency Stability (see note 1) Aging (First Year) Unit Minimum MHz 0.5 Typical Test conditions 150 HCMOS / TTL Output °C 0 to +70 -40 to +85 °C -55 +125 V +3.3 (± 5%) +5.0 (± 5%) ± ppm 15 50 ± ppm Input current Maximum 100 5 Refer to Ordering Information Refer to Ordering Information Refer to Ordering Information Ref at 25°C mA (see table 1) Output load HCMOS load (see table 2) TTL load Duty cycle Rise & Fall time Start-up time pF LS-TTL 15 5 % 40/60 ns 10 ms 10 Refer to Ordering Information From 10% Vcc to 90% Vcc Note 1: Include 25°C tolerance, operating temperature range, input voltage change, load change, first year aging, shock and vibration. Table 1 : Input Current Frequency range (MHz) 0.500 to 23.999 24.00 to 49.999 50.00 to 69.999 70.00 to 150.00 Vcc=5V Cl=15 pF 20 mA 30 mA 40 mA 60 mA Table 2 : Maximum Output Load Vcc=3.3V Cl=15pF 15 mA 20 mA 30 mA 45 mA Frequency range (MHz) Up to 50.000 Up to 70.000 Up to 150.00 Vcc=5V Vcc=3.3V 50pF 30pF 15pF 30pF 20pF 15pF Table 3 : Maximum Deviation Operating ±15ppm ±25ppm ±50ppm ±100ppm Temperature Range 0 to 70°C Yes Yes Yes Yes -10 to 70°C Yes Yes Yes -20 to 70°C Yes Yes Yes -40 to 85°C Yes Yes Yes 1 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEN4 DIL 8 Pin Half Size XO – Communications Equipment Application January 05th, 2006 Specification (rev-B) Mechanical Characteristics BOTTOM VIEW #1 #2 #3 #4 Pin connections N.C. or Tri state Ground Output +Vcc Tri state function Pin #1 Output (Pin #3) Open Active “1” Active “0” High Z Hmax = 5.6 mm Line 1 Line 2 Line 3 Marking Temex part number Frequency in MHz (6 digits) Date code (YYWW) – Manufacturing code Example for QEN4H DT50 / 49.152MHz Line 1 : QEN4H DT50 Line 2 : 49.152MHz Line 3 : 0547-I Packaging : Antistatic Tube (40pcs/tube) Ordering Information QEN4 H Package type Supply Voltage DIL Package QEN4 : 8 Pin Half Size H: + 5.0V BH : +3.3V Part numbering system J LQ Option Operating temperature range J : Tri-state output LQ : 0 to +70°C R : Duty cycle 45/55% JQ : -10 to +70°C HQ : -20 to +70°C DT : -40 to +85°C 25 10.000MHZ Frequency stability Nominal Frequency (MHz) 15 : 25 : 50 : 100 : ±15ppm ±25ppm ±50ppm ±100ppm Please enter the nominal frequency 2 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.