UPP9401e3 POWERMITETM PACKAGE COMMERCIAL TWO-WAY RADIO ANTENNA SWITCH DIODE SCOTTSDALE DIVISION APPEARANCE WWW . Microsemi .C OM DESCRIPTION This Microsemi Powermite PIN diode is perfect for two-way radio antenna switch applications where size and power handling capability are critical with its high isolation, low loss and low distortion characteristics. Its advantages also include the low forward-bias resistance and high zero-bias impedance that are essential for low loss, high isolation and wide bandwidth antenna switch performance. It is an ideal selection for applications requiring low profile and high-density mounting and is also available as RoHS Compliant with an e3 suffix. The Powermite package provides a full-metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and its unique locking tab acts as an efficient heat path to the mounting surface. Its innovative design makes this device ideal for use with automatic insertion equipment. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • • APPLICATIONS / BENEFITS • • • • High Power Surface Mount Package with very low thermal resistance RoHS compliant with e3 suffix part number Specified Low Distortion Low Bias Current Requirements High Zero Bias Impedance Full Metallic Bottom Eliminates Flux Entrapment Integral Heat Sink/Locking Tabs • • • Two-way radio antenna switch Low forward bias resistance High zero bias resistance Low loss high isolation for wide bandwidth performance Small size DO-216 package Compatible with Automatic insertion Equipment Very Low Inductance and Capacitance MAXIMUM RATINGS • • • • • MECHANICAL AND PACKAGING • Maximum Reverse Voltage: 50 Volts Average Power Dissipation @ TTAB1 =75oC: 2.5 Watts (When mounted on a PC board with 2 oz copper.) Thermal Resistance Junction to case (bottom): 10oC/W o o Operating and Storage Temperature: -55 C to +150 C o Solder Temperatures: 260 C for 10 s (maximum) • • • • • • CASE: Void-free transfer molded thermosetting epoxy compound meeting UL94V-0 TERMINALS: Annealed matteTin over copper and readily solderable per MIL-STD-750, method 2026 POLARITY: Cathode designated by TAB 2 MARKING: P01• WEIGHT: 0.016 gram (approximate) See package dimension on last page Tape & Reel option: 16 mm tape per Standard EIA481-B, 3000 on 7 inch reel or 12,000 on 13 inch reel ELECTRICAL CHARACTERISTICS (TA = 25oC unless noted) rd Capacitance Carrier Lifetime @ f = 100 MHz VR = 0 V @ f = 100 MHz V=0 V @ IF = 10 mA CT RP τ pF Transmit Harmonic Distortion @ Pin = 50 W f = 50 MHz IF = 50 mA μS Ohms Receive 3 Order Harmonic Distortion @ f = 100 MHz V=0V fA = 50 MHz fB = 51 MHz Voltage Rating VR Forward Voltage VF @ IR = 10 μA @ IF = 50 mA -dB -dB Volts Volts TYP MAX TYP MAX MIN TYP MIN TYP MIN MIN MIN MAX 0.75 1.0 0.75 1.0 5K 10K 1.0 2.0 80 60 50 1.0 Copyright © 2006 12-19-2006 REV B Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 UPP9401 Series Resistance RS, Ohms f = 100 MHz IF=50 mA Parallel Resistance UPP9401e3 SCOTTSDALE DIVISION POWERMITETM PACKAGE COMMERCIAL TWO-WAY RADIO ANTENNA SWITCH DIODE WWW . Microsemi .C OM PACKAGE AND MOUNTING PAD DIMENSIONS DO-216 Package (All dimensions +/-.005 inches) MOUNTING PAD (inches) UPP9401 Copyright © 2006 12-19-2006 REV B Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2