3M Scotch-Weld AC68 Cyanoacrylate Debonder Safety Data Sheet Copyright, 2011, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. 22-7490-0 Document group: 25/08/2011 Revision date: Transportation version number: 1.00 (17/05/2010) Version number: Supersedes date: 4.05 04/05/2011 This Safety Data Sheet has been prepared in accordance with the REACH Regulation (EC) 1907/2006 and its modifications. SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier 3M Scotch-Weld AC68 Cyanoacrylate Debonder Product identification numbers GS-2000-4443-5 GS-2000-4779-2 1.2. Relevant identified uses of the substance or mixture and uses advised against Identified uses Industrial use. 1.3. Details of the supplier of the substance or mixture 3M United Kingdom PLC, 3M Centre, Cain Road, Bracknell, Berkshire, RG12 8HT. Address: E Mail: Website: [email protected] www.3M.com/uk 1.4. Emergency telephone number +44 (0)1344 858 000 SECTION 2: Hazard identification 2.1. Classification of the substance or mixture Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive Indication of danger Irritant. 2.2. Label elements Dangerous substances(67/548/EEC)/preparations(1999/45/EC) directive Symbols Xi Irritant. __________________________________________________________________________________________ Page: 1 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder Contains: No ingredients are assigned to the label. Risk phrases R36 Irritating to eyes. Safety phrases None. Updated per Regulation (EC) 648/2004 on detergents. 2.3. Other hazards None known. SECTION 3: Composition/information on ingredients Ingredient Propylene Carbonate CAS Nbr 108-32-7 EU Inventory % by Wt EINECS 203- 99 - 99.9 572-1 Acetone 67-64-1 EINECS 200662-2 0.1 - 1 Classification Xi:R36 (EU) Eye Irrit. 2, H319 (CLP) F:R11; Xi:R36; R66; R67 (EU) Flam. Liq. 2, H225; Eye Irrit. 2, H319; STOT SE 3, H336 (CLP) Please see section 16 for the full text of any R phrases and H statements referred to in this section Please refer to section 15 for the any applicable Notas that have been applied to the above components For information on ingredient occupational exposure limits or PBT or vPvB status, see sections 8 and 12 of this SDS SECTION 4: First aid measures 4.1. Description of first aid measures Eye contact Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medical attention. Skin contact Wash with soap and water. If signs/symptoms develop, get medical attention. Inhalation Remove person to fresh air. If you feel unwell, get medical attention. If swallowed Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1 Information on toxicological effects 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures __________________________________________________________________________________________ Page: 2 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder 5.1. Extinguishing media In case of fire: Use a fire fighting agent suitable for flammable liquids or gases such as dry chemical or carbon dioxide. 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode. Hazardous Decomposition or By-Products Substance Carbon monoxide. Carbon dioxide. Condition During combustion. During combustion. 5.3. Advice for fire-fighters Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapours, in accordance with good industrial hygiene practice. Warning: A motor could be an ignition source and could cause flammable gases or vapours in the spill area to burn or explode. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions For larger spills, cover drains and build dykes to prevent entry into sewer systems or bodies of water. Avoid release to the environment. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a toxic, corrosivity or flammability hazard. Collect as much of the spilled material as possible using non-sparking tools. Place in a metal container approved for transportation by appropriate authorities. Clean up residue with water. Seal the container. Dispose of collected material as soon as possible. 6.4. Reference to other sections Refer to Section 8 and Section 13 for more information SECTION 7: Handling and storage 7.1. Precautions for safe handling Avoid eye contact. For industrial or professional use only. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid contact with oxidising agents (eg. chlorine, chromic acid etc.) Vapours may travel long distances along the ground or floor to an ignition source and flash back. 7.2. Conditions for safe storage including any incompatibilities Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store away from heat. Protect from sunlight. Store away from acids. Store away from oxidising agents. 7.3. Specific end use(s) See information in Section 7.1 and 7.2 for handling and storage recommendations. See Section 8 for exposure controls and personal protection recommendations. __________________________________________________________________________________________ Page: 3 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder SECTION 8: Exposure controls/personal protection 8.1 Control parameters Occupational exposure limits Ingredient Acetone CAS Nbr 67-64-1 Agency Health and Safety Comm. (UK) Limit type Additional comments TWA:1210 mg/m³(500 ppm);STEL:3620 mg/m³(1500 ppm) Health and Safety Comm. (UK) : UK Health and Safety Commission TWA: Time-Weighted-Average STEL: Short Term Exposure Limit ppm: parts per million mg/m³: milligrams per cubic metre CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Provide appropriate local exhaust ventilation at transfer points. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapours/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Wear eye/face protection. The following eye protection(s) are recommended: Safety glasses with side shields. Indirect vented goggles. Skin/hand protection Wear protective gloves. Gloves made from the following material(s) are recommended: Fluoroelastomer Polyethylene. Respiratory protection In case of inadequate ventilation wear respiratory protection. Select one of the following approved respirators based on airborne concentration of contaminants and in accordance with regulations: Half face piece or full face air-purifying respirator with organic vapour cartridges. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Liquid. Physical state Appearance/Odour pH Boiling point/boiling range Melting point Flammability (solid, gas) Explosive properties Clear; Slight odour. Not applicable. 235 ºC Not applicable. Flammable Liquid: Category 4. Not classified __________________________________________________________________________________________ Page: 4 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder Oxidising properties Flash point Flammable Limits(LEL) Flammable Limits(UEL) Vapour pressure Relative density Not classified 67.8 ºC [Test Method:Closed Cup] 1.8 % volume 15 % volume <=20 Pa [@ 20 ºC ] 1.21 [Ref Std:WATER=1] Water solubility Partition coefficient: n-octanol/water Evaporation rate Vapour density Complete No data available. Negligible >=3.5 [Ref Std:AIR=1] Viscosity Density 0.001 - 0.01 Pa-s [@ 23 ºC ] 1.21 g/ml 9.2. Other information Hazardous air pollutants Percent volatile 0 % weight 100 % SECTION 10: Stability and reactivity 10.1 Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section 10.2 Chemical stability Stable. 10.3 Possibility of hazardous reactions Hazardous polymerisation will not occur. 10.4 Conditions to avoid Heat. Sparks and/or flames. 10.5 Incompatible materials Strong acids. Strong oxidising agents. 10.6 Hazardous decomposition products Substance None known. Condition SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labelling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1 Information on Toxicological effects __________________________________________________________________________________________ Page: 5 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Eye contact Severe eye irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and impaired vision. Skin contact Contact with the skin during product use is not expected toresult in significant irritation. Inhalation Respiratory tract irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Ingestion Gastrointestinal irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhoea. Toxicological Data Acute Toxicity Name Route Overall product Dermal Overall product Ingestion Propylene Carbonate Propylene Carbonate Acetone Acetone Dermal Ingestion Dermal InhalationVapor (4 hours) Ingestion Acetone ATE = acute toxicity estimate Skin Corrosion/Irritation Name Overall product Species Propylene Carbonate Acetone Serious Eye Damage/Irritation Name Overall product Species Propylene Carbonate Acetone Skin Sensitisation Name Species Species Value Rabbit Rat Rabbit Rat No test data available; calculated ATE >5,000 mg/kg No test data available; calculated ATE >5,000 mg/kg LD50 > 3,000 mg/kg LD50 > 5,000 mg/kg LD50 > 15,688 mg/kg LC50 76 mg/l Rat LD50 5,800 mg/kg UN GHS Classification Not classified (0% unknown) Not classified (0% unknown) Not classified Not classified Not classified Not classified Not classified Value No test data available; calculated to cause no significant irritation No data available Minimal irritation UN GHS Classification Not classified Value No test data available; calculated to be severe irritant No data available Severe irritant UN GHS Classification Category 2A Value UN GHS Classification Not classified Category 2A __________________________________________________________________________________________ Page: 6 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder Overall product No test data available. Propylene Carbonate Acetone No data available No data available Respiratory Sensitisation Name Overall product Species Value No test data available. Propylene Carbonate Acetone Not classified based on component data UN GHS Classification Not classified based on component data No data available No data available Germ Cell Mutagenicity Name Overall product Route Overall product Propylene Carbonate Acetone Value No data available No test data available. No data available Some positive data exist, but the data are not sufficient for classification In vivo Carcinogenicity Name Route Species Overall product UN GHS Classification Overall Germ Cell Mutagenicity classificationNot classified Not classified Value No test data available. Propylene Carbonate Acetone No data available Not carcinogenic Not specified. UN GHS Classification Not classified based on component data Not classified Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Overall product No test data available. Propylene Carbonate Acetone No data available Ingestion Acetone Inhalation Some positive reproductive/deve lopmental data exist, but the data are not sufficient for classification Some positive reproductive/deve lopmental data exist, but the data are not sufficient for classification Species Test result Exposure Duration UN GHS Classification Not classified based on component data NOEL 1,700 mg/kg/day NOEL 5.2 mg/l Target Organ(s) __________________________________________________________________________________________ Page: 7 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder Specific Target Organ Toxicity - single exposure Name Route Target Value Organ(s) Propylene No data Carbonate available Acetone Inhalation central May cause nervous drowsiness or system dizziness depressio n Acetone Inhalation respirator Some positive y data exist, but irritation the data are not sufficient for classification Acetone Inhalation hematopp Some positive oitic data exist, but system the data are not sufficient for classification Acetone Inhalation liver Some positive data exist, but the data are not sufficient for classification Acetone Inhalation immune Some positive system data exist, but the data are not sufficient for classification Acetone Ingestion central May cause nervous drowsiness or system dizziness depressio n Specific Target Organ Toxicity - repeated exposure Name Route Target Value Organ(s) Overall No test data product available. Propylene Carbonate Acetone Dermal eyes Acetone Inhalation hematopoi No data available Some positive data exist, but the data are not sufficient for classification Some positive Species Species Test result Exposure Duration UN GHS Classification LOAEL 0.6 mg/l Category 3 Irritation Positive Not classified NOEL 0.6 mg/l Not classified LOEL 24 mg/l Not classified NOEL 0.6 mg/l Not classified NOAEL N/A Category 3 Test result Exposure Duration UN GHS Classification Not classified based on component data NOEL N/A Not classified NOEL 0.6 Not classified __________________________________________________________________________________________ Page: 8 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder etic system | immune system kidney and/or bladder data exist, but the data are not sufficient for classification Some positive data exist, but the data are not sufficient for classification All data are negative Acetone Inhalation Acetone Inhalation heart Acetone Inhalation liver Acetone Ingestion heart Acetone Ingestion hematopoi etic system Acetone Ingestion liver Acetone Ingestion kidney and/or bladder Acetone Ingestion respirator y system Acetone Ingestion skin Acetone Ingestion All data are negative Acetone Ingestion bone, teeth, nails, and/or hair muscles Acetone Ingestion eyes All data are negative All data are negative Some positive data exist, but the data are not sufficient for classification Some positive data exist, but the data are not sufficient for classification Some positive data exist, but the data are not sufficient for classification Some positive data exist, but the data are not sufficient for classification Some positive data exist, but the data are not sufficient for classification All data are negative All data are negative mg/l LOAEL 119 mg/l Not classified NOAEL 19,000 ppm NOAEL 45 mg/l LOEL 2,500 mg/kg/day Not classified NOEL 200 mg/kg/day Not classified NOEL 1,579 mg/kg/day Not classified NOEL 900 mg/kg/day Not classified NOEL N/A Not classified NOAEL 11,298 mg/kg/day NOAEL 11,298 mg/kg Not classified NOAEL 2,500 mg/kg NOAEL 11,298 mg/kg/day Not classified Not classified Not classified Not classified Not classified Aspiration Hazard __________________________________________________________________________________________ Page: 9 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder Name Overall product Value No test data available. Propylene Carbonate Acetone Not an aspiration hazard Not an aspiration hazard UN GHS Classification Not classified based on component and/or viscosity data Not classified Not classified Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. Additional information leading to material classification in Section 2 is available upon request. In addition, environmental fate and effects data on ingredients may not be reflected in this section because an ingredient is present below the threshold for labelling, an ingredient is not expected to be available for exposure, or the data is considered not relevant to the material as a whole. 12.1. Toxicity Acute aquatic hazard: Not acutely toxic to aquatic life by GHS criteria. Chronic aquatic hazard: Not chronically toxic to aquatic life by GHS criteria. No product test data available. No component test data available. 12.2. Persistence and degradability No test data available. 12.3 : Bioaccumulative potential No test data available. 12.4. Mobility in soil Please contact manufacturer for more details 12.5. Results of the PBT and vPvB assessment No information available at this time, contact manufacturer for more details 12.6. Other adverse effects No information available. SECTION 13: Disposal considerations 13.1 Waste treatment methods Dispose of contents/ container in accordance with the local/regional/national/international regulations Incinerate in an industrial or commercial facility. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste. The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of 3M, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC - 2000/532/EC __________________________________________________________________________________________ Page: 10 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional regulations are complied with and always use a licensed waste contractor. EU waste code (product as sold) 070104* Other organic solvents, washing liquids and mother liquors 20 01 13* Solvents SECTION 14: Transportation information GS-2000-4443-5, GS-2000-4779-2 Not hazardous for transportation SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture Global inventory status Contact 3M for more information. The components of this material are in compliance with the provisions of the Korean Toxic Chemical Control Law. Certain restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of Australia National Industrial Chemical Notification and Assessment Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of Japan Chemical Substance Control Law. Certain restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of Philippines RA 6969 requirements. Certain restrictions may apply. Contact the selling division for additional information. The components of this product are in compliance with the new substance notification requirements of CEPA. The components of this product are in compliance with the chemical notification requirements of TSCA. List of ingredients according to Annex VII D of the regulation on detergents 648/2004/EC The following ingredient information is provided per Regulation EC No. 648/2004 on Detergents: Ingredient Propylene carbonate Acetone CAS No. 108-32-7 67-64-1 Concentration >10% 0.1-1-% 15.2. Chemical Safety Assessment Not applicable SECTION 16: Other information List of relevant H statements H225 H319 H336 Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. List of relevant R-phrases R11 Highly flammable. R36 Irritating to eyes. R66 Repeated exposure may cause skin dryness or cracking. R67 Vapours may cause drowsiness and dizziness. __________________________________________________________________________________________ Page: 11 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder Revision information: Revision Changes: Risk phrase was modified. Section 9: pH information was modified. Section 2: Symbol was modified. Sectio 16: UK disclaimer was modified. Section 1: Product identification numbers was modified. Section 9: Evaporation Rate information was modified. Section 9: Viscosity information was modified. Section 16: List of relevant R phrase information was modified. Section 3: Composition/ Information of ingredients table was modified. Section 9: n-octanol/water coefficient information was modified. Section 9: Boiling point information was modified. Section 9: Relative density information was modified. Section 9: Solubility in water text was modified. Section 13: EU waste code (product as sold) information was modified. Section 9: Flammability (solid, gas) information was modified. Section 16: Regulations – Inventories – EU ONLY was modified. Section 9: Flash point information was modified. Section 9: Melting point information was modified. Section 9: Flammable limits (LEL) information was modified. Section 9: Flammable limits (UEL) information was modified. Section 9: Vapour density value was modified. Section 9: Vapour pressure value was modified. Section 9: Density information was modified. Section 9: Property description for optional properties was modified. Section 8: Occupational exposure limit table was modified. Section 8: mg/m³ key was modified. Aspiration Hazard Table was modified. Section 11: Acute Toxicity table was modified. Carcinogenicity Table was modified. Serious Eye Damage/Irritation Table was modified. Germ Cell Mutagenicity Table was modified. Skin Sensitisation Table was modified. Respiratory Sensitisation Table was modified. Reproductive Toxicity Table was modified. Skin Corrosion/Irritation Table was modified. Target Organs - Repeated Table was modified. Target Organs - Single Table was modified. Section 11: Health Effects - Eye information was modified. Section 11: Health Effects - Inhalation information was modified. Section 11: Health Effects - Ingestion information was modified. Section 5: Hazardous combustion products table was modified. Section 6: Accidental release personal information was modified. Section 6: Accidental release environmental information was modified. Section 6: Accidental release clean-up information was modified. Section 7: Precautions safe handling information was modified. Section 7: Conditions safe storage was modified. Section 8: Appropriate Engineering controls information was modified. Section 8: Personal Protection - Eye information was modified. Section 10: Hazardous decomposition or by-products table was modified. Section 13: Standard Phrase Category Waste GHS was modified. Section 4: First aid for eye contact information was modified. Section 4: First aid for inhalation information was modified. Section 4: First aid for ingestion (swallowing) information was modified. Two-column table displaying the unique list of H Codes and statements (std phrases) for all components of the given __________________________________________________________________________________________ Page: 12 of 13 3M Scotch-Weld AC68 Cyanoacrylate Debonder material. was modified. Section 12: Acute aquatic hazard information was added. Section 12: Chronic aquatic hazard heading was added. Section 12: Acute aquatic hazard heading was added. Section 12: Chronic aquatic hazard information was added. Section 8: Personal Protection - Skin/hand information was added. Section 8: Personal Protection - Respiratory Information was added. DISCLAIMER: The information on this Safety Data Sheet is based on our experience and is correct to the best of our knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use (except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the product in combination with other materials. For these reasons, it is important that customers carry out their own test to satisfy themselves as to the suitability of the product for their own intended applications. 3M United Kingdom MSDSs are available at www.3M.com/uk __________________________________________________________________________________________ Page: 13 of 13