TOTAL POWER INT'L UNIVERSAL INPUT AC TO DC MEDICAL APPLICATION EXTERNAL ADAPTER SINGLE OUTPUT 45-50 WATTS SWITCHING POWER SUPPLIES TPES49 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES DESKTOP IEC320-2P/3P AC RECEPTACLE MEET MEDICAL STANDARDS EN60601/ UL2601 EMI MEET EN 55022/ FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: 90-264Vac typical. Input Connector: IEC320-3P DT7 or 2P DT8 AC input receptacle. Input Frequency: 47-63Hz. Inrush Current: 32A @230Vac. Input Current: 0.79A@115Vac & 0.37A @230Vac. Dielectric Withstand: Meet IEC601. EMI: Meet EN55022 / FCC Class B. Hold-up Time: 15mS @115Vac. 60mS @230Vac. Over Temp. Protection: Optional (NTC ckt.). Earth Leakage: Less than 0.1 mA. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 45-50Watts typical. Output Connector & Cord: Optional. Line Regulation: 0.1% typical. Load Regulation: ±1.5-3.0% typical. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in by latch circuit. Adjustability: Factory set. Over Current Protection (OCP): Installed. Current limiting can be set precisely as per request. GENERAL SPECIFICATION Efficiency: 85-87% typical. Switching Frequency: Typ. 85 ~ 110K Hz. Circuit Topology: Fixed Frequency flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: Medical standards IEC601/EN60601/ UL2601, Class I for DT7, or Class II for DT8 type. Power Density: 3.3Watts. / Cubic Inch. Operating Temperature: 0 to +40°C Storage Temperature: -20 to +85°C. Temperature Coefficient: 0.04% /°C Cooling: Free air convection. Construction: Impact resistant thermo-plastic enclosure case. Desktop Format. Note: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load varied from half load to full load (±%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m)cord AWG#18 wires. For the details of safety approval, please consult the factory. TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -1- MODEL NO. DESCRIPTION: TPES49 - X X X Y Y - S AC INLET TYPE: NONE FOR DT7, [ 8 ] FOR DT8 OUTPUT CURRENT OUTPUT VOLTAGE SERIES NAME (Total Power External Switcher): About 49W. OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. TPES49-05060 TPES49-07550 TPES49-12040 TPES49-15033 TPES49-24021 TPES49-30017 TPES49-12040-8 TPES49-15033-8 TPES49-24021-8 TPES49-30017-8 AC TYPE. DT7 DT7 DT7 DT7 DT7 DT7 DT8 DT8 DT8 DT8 OUTPUT VOLTAGE 5.0Vdc 7.5Vdc 12.0Vdc 15.0Vdc 24.0Vdc 30.0Vdc 12.0Vdc 15.0Vdc 24.0Vdc 30.0Vdc MECHANICAL DIMENSIONS: MM [INCHES] OUTPUT CURRENT 6.0A 5.0A 4.0A 3.3A 2.1A 1.7A 4.0A 3.3A 2.1A 1.7A WEIGHT: 373.0g (13.2 Oz.) TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -2-