MODEL TLL-5902 International size reference: 1/2AA, ER14252 TECHNICAL DATA (Typical values @+25 ºC for batteries stored for one year or less) Nominal capacity @ 1 mA, to 2V 1.1 Ah Rated voltage 3.6 V Maximum recommended continuous current 50 mA Maximum pulse current capability 100 mA Weight 9.6 g (0.339 oz) Volume 4 cc Operating temperature range -55 ºC to +85 ºC Li metal content approx. 0.35 g U.L. Component Recognition, MH 12193 Volts DISCHARGE CHARACTERISTICS @ +25ºC 4.0 3.5 3.0 2.5 2.0 220 Ω ~14 mA (0.80 Ah) 1.5 470 Ω ~7 mA (0.97 Ah) 3.6 kΩ ~1 mA (1.10 Ah) 40 kΩ 220 kΩ 27 kΩ ~0.125 mA ~40 µA ~17 µA (1.08 Ah) (1.02 Ah) (0.92 Ah) TERMINATIONS & ORDERING NO. 1.0 1 Volts 10 100 1000 10000 VOLTAGE VS. TEMPERATURE 100000 Hours SUFFIX- /S STANDARD 15-5902-21530 SUFFIX- /T SOLDER TABS 15-5902-31530 SUFFIX- /P AXIAL PINS 15-5902-41530 SUFFIX- /PT2 RADIAL PINS 15-5902-36530 SUFFIX- /TP POLARIZED TABS 15-5902-52530 SUFFIX- /PT POLARIZED TABS 15-5902-53530 CAPACITY VS. CURRENT Ah 1.2 3.7 -30 °C 4 µA 3.5 1.0 17 µA 25 °C 3.3 0.8 0.8 mA 3.1 0.6 2.9 2 mA 55 °C 72 °C 0.4 2.7 7 mA 14 mA 2.5 -50 0.2 -30 -10 10 30 50 70 90 ºC 0.01 0.1 1 10 mA iXtra - Long Term High Performance Note: Any presentations in this data sheet concerning performance are for information purpose only and are not construed as warranties either expressed or implied, of future performance. Rev. C 11/05 Page 1 of 2 TLL-5902 CELL FEATURES 3.6 V Primary lithium-thionyl chloride (Li-SOCl2) Fast voltage recovery after long term storage and/or usage High energy density High and stable operating voltage Low self discharge rate 10 years shelf life Bobbin construction Hermetic glass-to-metal-sealing Non-flammable electrolyte Non-restricted for transportation Volts MAIN APPLICATIONS Utility meters (elect., water & gas) Automatic meter reading RF systems Sensors & monitoring systems Tracking systems Wireless security systems Automotive electronics Industrial electronics Ultra Low Power (ULP) devices Others VOLTAGE RESPONSE AFTER STORAGE 3.5 After 1 year After 2 years 3.4 After 5 years 3.3 After 10 years 3.2 STORAGE CONDITIONS 3.1 Cells should be stored in a clean & dry (less than 30 % RH) area Temp. should not exceed +30 ºC 3.0 Pulse applied: 10 mA for 1 sec Storage: RT Background current: None 2.9 2.8 2.7 0 200 400 600 800 1000 VOLTAGE RESPONSE Volts 3.5 For updated information please visit our website www.tadiranbat.com 1200 msec VOLTAGE RESPONSE Volts 3.5 After 4 years After 1 year 3.4 3.3 3.4 After 5 years After 7 years After 10 years After 2 years 3.3 Pulse applied: 10 mA for 100 msec Temperature: RT Background current: 5 µA 3.2 After 1 year Pulse applied: 10 mA for 100 msec Temperature: RT Background current: 10 µA 3.2 3.1 3.1 0 20 40 60 80 100 120 msec 0 20 40 60 80 100 120 msec iXtra - Long Term High Performance Note: Any presentations in this data sheet concerning performance are for information purpose only and are not construed as warranties either expressed or implied, of future performance. Rev. C 11/05 Page 2 of 2