SDAH2500 thru SDAH15000 Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 2 AMPS 2500 ─ 15000 VOLTS STANDARD RECOVERY HIGH CURRENT - HIGH VOLTAGE RECTIFIER Designer’s Data Sheet FEATURES: • • • • • • • Average Output Current 2 Amps PIV 2500 to 15000 Volts Low Leakage Current Low Forward Voltage Drop Corona Free Superior Thermal Shock Resistance Available in Fast, Ultra Fast, and Hyper Fast versions. Consult Factory. ELECTRICAL CHARACTERISTICS Part Number Peak Inverse Voltage (per leg) Average DC Output Current TC = Case Temp Reverse Recovery Time Peak Recurrent Forward Current Maximum Forward Voltage (per leg) Maximum Reverse Current (per leg) @ PIV Symbol PIV IF (AV) trr 2/ IFRM VF IR Units Volts Amps µs Amps Volts µA 25oC IF = 1.0 A 25oC 100oC A B C Conditions 50oC 100oC Case Size INCHES SDAH2500 2500 2 1.2 5 150 3 1 75 1.5 .38 .69 SDAH5000 5000 2 1.2 5 150 6 1 75 2.5 .38 .69 SDAH7500 7500 2 1.2 5 150 8 1 75 3.5 .38 .69 SDAH10000 10000 2 1.2 5 150 11 1 75 4.5 .38 .69 SDAH12500 12500 2 1.2 5 150 13.5 1 75 5.5 .38 .69 SDAH15000 15000 2 1.2 5 150 16 1 75 6.5 .38 .69 NOTES: * Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% 1. Unless Otherwise Specified, All Electrical Characteristics @25ºC 2. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25oC NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0028A DOC SDAH2500 thru SDAH15000 Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: SDAH2500 thru SDAH15000 A B C 0.051” dia ±0.003 (16 ga) 2” Min. *For information on curves, contact the Factory Representative for Engineering Assistance.