SDR9400S10 thru SDR9400S20 Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet FEATURES: • • • • • • • • • • • • Forward Current to 400 Amps PIV 1000 to 2000 Volts Transient Voltage Rating of 200 Volts Above PIV Pressure Contact Device Single Chip Construction Low Forward Voltage Drop Hermetically Sealed For High Power Applications For Reverse Polarity Version Add Suffix “R” Fast Recovery Version Available (0.7 µsec typical) Higher Voltage Versions up to 5000 Volts Available TX, TXV, and Space Level Screening Available 400 AMPS 1000 ─ 2000 VOLTS 25 µsec STANDARD RECOVERY HIGH CURRENT RECTIFIER DO-9 MAXIMUM RATINGS 1/ Peak Repetitive Reverse Voltage and DC Blocking Voltage Symbol SDR9400S10 SDR9400S15 SDR9400S20 Value Unit 1000 1500 2000 Volts IO 400 Amps IFSM 3500 Amps TOP & Tstg -55 to +175 VRRM VRWM VR Average Rectified Forward Current Over Full Cycle (Resistive Load, 60 Hz, Sine Wave, TA=25oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA=25oC) Operating and Storage Temperature Maximum Thermal Resistance (Junction to Case) RθJC 0.14 o o C C/W NOTES: 1/ Mounting force = 238.95 in.-lbs. ± 10% for non-lubricated threads Typical weight = 220 grams NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RP0007B DOC Solid State Devices, Inc. SDR9400S10 thru SDR9400S20 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage Drop ((IF = 400 Amp Pulse, TJ = 25oC) Instantaneous Forward Voltage Drop (IF = 400 Amp Pulse, TJ = 175oC) Reverse Leakage Current (Rated VR pulse, TJ = 25oC) Reverse Leakage Current, Per Leg (Rated VR pulse, TJ = 175oC) Reverse Recovery Time (IFM = 400 A, VR =400 V, di/dt = -25 µs, RS = 10Ω, CS = 0.5 µF, TA = 25oC) CASE OUTLINE: DO-9 *For information on curves, contact the Factory Representative for Engineering Assistance. Symbol Value Unit VF 1.15 Volts VF 1.10 Volts IR 2 mA IR 40 mA trr 25 µsec