SDA803A thru SDA803D Solid State Devices, Inc. HIGH RELIABILITY 20 AMP, 50 – 300 VOLTS 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ULTRA FAST RECOVERY SINGLE PHASE BRIDGE RECTIFIER ASSEMBLY Designer’s Data Sheet Part Number/Ordering Information 1/ SDA803 FEATURES: • Ultra Fast Reverse Recovery Time 50 ns Max • Average Output Current 20 Amps @ 55OC • Max. Thermal Resistance 4.0OC/Watt • Aluminum Case Provides Maximum Thermal Conductivity • Hermetically Sealed Diode Cells • Turret Terminals • Available in Standard, Fast, and Hyper Fast Versions • TX, TXV, and S-Level Screening Available __ __ │ └ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Peak Inverse Voltage (per leg) A = 50V B = 100V C = 200V D = 300V ELECTRICAL CHARACTERISTICS 3/ Sine Wave Reverse4/ RMS Recovery Input Time Voltage Max. Average DC Output Current TC=Case Temp Average DC Output Current TA= Ambient Temp (no heat sink) Peak Forward Surge Current (1 Cycle) Peak Repetitive Forward Current Maximum Forward Voltage (per leg) @ 6 ADC Maximum Reverse Current (per leg) @ PIV IF (AV) IFSM IFRM VF IR Amps Amps Volts Part Number Peak Inverse Voltage (per leg) Symbol PIV Vr Trr IF (AV) Units Conditions Volts Volts ns Max Amps 55oC 100oC SDA803A 50 43.7 50 20 14 6.0 3.4 125 60 SDA803B 100 87.5 50 20 14 6.0 3.4 125 SDA803C 200 175 50 20 14 6.0 3.4 SDA803D 300 262 50 20 14 6.0 3.4 Amps 55oC 100oC μA 25oC 100oC 0.95 5 200 60 0.95 5 200 125 60 0.95 5 200 125 60 0.95 5 200 SDA803A thru SDA803D: NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0040A DOC