MAXIM MAX9383ESA

19-2234; Rev 1; 11/02
ECL/PECL Phase-Frequency Detectors
The MAX9382/MAX9383 feature low propagation and
reset delay, making them ideal for high-frequency clock
synchronization use. The MAX9382 uses 100K logic
levels, has a supply voltage range of VCC - VEE = 4.2V
to 5.5V, and is pin compatible with Motorola’s
MCK12140. The MAX9383 uses 10H logic levels with a
supply voltage range of VCC - VEE = 4.75V to 5.5V and
is pin compatible with the MCH12140.
The MAX9382/MAX9383 are available in industry-standard 8-pin SO and space-saving 8-pin µMAX packages.
Applications
Precision Clock Distribution
Features
♦ Guaranteed Minimum Pulse Width Eliminates
Dead Band
♦ 450MHz Typical Bandwidth with up to ±π Phase
Detection
♦ 75kΩ Internal Input Pulldown Resistors
♦ 44mA Typical Supply Current
♦ ±2kV ESD Protection (Human Body Model)
♦ Pin Compatible with MCK12140 and MCH12140
♦ Available in 8-Pin µMAX and SO Packages
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX9382EUA*
-40°C to +85°C
8 µMAX
MAX9382ESA
-40°C to +85°C
8 SO
MAX9383EUA*
-40°C to +85°C
8 µMAX
MAX9383ESA
-40°C to +85°C
8 SO
*Future product—contact factory for availability.
Central Office
DSLAM
DLC
Base Station
ATE
Functional Diagram
Pin Configuration
TOP VIEW
U
R
U
R
Q
MAX9382
MAX9383
U 1
MAX9382
MAX9383
8
VCC
U 2
7
R
D
3
6
V
D 4
5
VEE
S
S
Q
R
V
D
D
µMAX/SO
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX9382/MAX9383
General Description
The MAX9382/MAX9383 are high-speed PECL/ECL
phase-frequency detectors designed for use in highbandwidth phase-locked loop (PLL) applications. The
devices compare a single-ended reference (R) and a
VCO (V) input and produce pulse streams on differential up (U) and down (D) outputs. When integrated, the
difference of the output pulse streams provides a control voltage proportional to input phase or frequency difference. Guaranteed minimum short pulse duration
completely eliminates minimum phase difference
requirements during the lock condition, maximizing
loop jitter performance.
MAX9382/MAX9383
ECL/PECL Phase-Frequency Detectors
ABSOLUTE MAXIMUM RATINGS
VCC - VEE ............................................................................+6.0V
Inputs (R, V).................................................(VCC) to (VEE - 0.3V)
Continuous Output Current .................................................50mA
Surge Output Current........................................................100mA
Junction-to-Ambient Thermal Resistance in Still Air*
8-Pin µMAX ..............................................................+221°C/W
8-Pin SO ..................................................................+170°C/W
Junction-to-Ambient Thermal Resistance with*
500LFPM Airflow
8-Pin µMAX ..............................................................+155°C/W
8-Pin SO.....................................................................+99°C/W
Junction-to-Case Thermal Resistance
8-Pin µMAX ...............................................................+39°C/W
8-Pin SO....................................................................+40°C/W
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
ESD Protection
Human Body Model (R, V, U, U, D, D)............................±2kV
Soldering Temperature (10s) .......................................... +300°C
*Ratings are for single-layer board.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
MAX9382 DC ELECTRICAL CHARACTERISTICS
(VCC - VEE = 4.2V to 5.5V. Outputs loaded with 50Ω ±1% to VCC - 2V, unless otherwise noted. Typical values at VCC - VEE = 4.5V.)
(Notes 1, 2, 3)
PARAMETER
SYMBOL CONDITIONS
-40°C
MIN
TYP
+85°C
+25°C
MAX
MIN
TYP
MAX
MIN
TYP
MAX
UNITS
INPUTS (R, V)
Input High
Voltage
VIH
VCC 1.165
VCC 0.880
VCC 1.165
VCC 0.880
VCC 1.165
VCC 0.880
V
Input Low
Voltage
VIL
VCC 1.810
VCC 1.475
VCC 1.810
VCC 1. 475
VCC 1.810
VCC 1.475
V
Input High
Current
IIH
VIN = VIHMAX
150
µA
Input Low
Current
IIL
VIN = VILMIN
0.5
150
150
0.5
0.5
µA
OUTPUTS (U, U, D, D)
Single-Ended
Output High
Voltage
VOH
VIN = VIH or
VIL
VCC 1.085
VCC 0.990
VCC 0.880
VCC 1.035
VCC 0.960
VCC 0.880
VCC 1.035
VCC 0.940
VCC 0.880
V
Single-Ended
Output Low
Voltage
VOL
VIN = VIH or
VIL
VCC 1.890
VCC 1.810
VCC 1.555
VCC 1.850
VCC 1.770
VCC 1.620
VCC 1.810
VCC 1.730
VCC 1.600
V
VOH VOL
VIN = VIH or
VIL
585
820
585
810
585
800
Differential
Output Voltage
mV
POWER SUPPLY
Supply Current
2
IEE
(Note 4)
43
56
44
56
45
_______________________________________________________________________________________
58
mA
ECL/PECL Phase-Frequency Detectors
(VCC - VEE = 4.75V to 5.5V. Outputs loaded with 50Ω ±1% to VCC - 2V, unless otherwise noted. Typical values at VCC - VEE = 5.2V.)
(Notes 1, 2, 3)
PARAMETER
SYMBOL CONDITIONS
-40°C
MIN
TYP
+25°C
MAX
MIN
TYP
+85°C
MAX
MIN
TYP
MAX
UNITS
INPUTS (R, V)
Input High
Voltage
VIH
VCC 1.230
VCC 0.890
VCC 1.130
VCC 0.810
VCC 1.060
VCC 0.720
V
Input Low
Voltage
VIL
VCC 1.950
VCC 1.500
VCC 1.950
VCC 1. 480
VCC 1.950
VCC 1.480
V
Input High
Current
IIH
VIN = VIHMAX
Input Low
Current
IIL
VIN = VILMIN
0.5
150
150
0.5
150
0.5
µA
µA
OUTPUTS (U, U, D, D)
Single-Ended
Output High
Voltage
VOH
VIN = VIH or
VIL
VCC 1.115
VCC 1.010
VCC 0.890
VCC 0.980
VCC 0.924
VCC 0.810
VCC 0.945
VCC 0.900
VCC 0.720
V
Single-Ended
Output Low
Voltage
VOL
VIN = VIH or
VIL
VCC 1.990
VCC 1.832
VCC 1.650
VCC 1.950
VCC 1.740
VCC 1.630
VCC 1.950
VCC 1.700
VCC 1.595
V
VOH VOL
VIN = VIH or
VIL
650
822
650
817
650
803
Differential
Output Voltage
mV
POWER SUPPLY
Supply Current
IEE
(Note 4)
37
52
38
52
39
52
mA
MAX9382/MAX9383 AC ELECTRICAL CHARACTERISTICS
(Over specified DC input parameters, f = 100MHz, outputs loaded with 50Ω ±1% to VCC - 2V, unless otherwise noted.) (Note 5)
PARAMETER
SYMBOL CONDITIONS
-40°C
+25°C
+85°C
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
UNITS
R Input to U
Output Delay
tPRU
Figure 1
575
650
750
590
660
780
635
720
830
ps
V Input to D
Output Delay
tPVD
Figure 1
575
650
750
590
660
780
635
720
830
ps
R Input to D
Output Delay
tPRD
Figure 1
945
1120
1320
960
1110
1360
1005
1150
1360
ps
V Input to U
Output Delay
tPVU
Figure 1
945
1120
1320
960
1110
1360
1005
1150
1360
ps
Minimum Pulse
Duration
tPmin
Figure 1
370
470
370
450
370
430
ps
_______________________________________________________________________________________
3
MAX9382/MAX9383
MAX9383 DC ELECTRICAL CHARACTERISTICS
MAX9382/MAX9383
ECL/PECL Phase-Frequency Detectors
MAX9382/MAX9383 AC ELECTRICAL CHARACTERISTICS (continued)
(Over specified DC input parameters, f = 100MHz, outputs loaded with 50Ω ±1% to VCC - 2V, unless otherwise noted.) (Note 5)
PARAMETER
Maximum
Operating
Frequency
SYMBOL CONDITIONS
fMAX
Phase Offset
Added Random
Jitter
tRJ
Output Rise/ Fall
Time
tR , t F
±π usable
phase
difference
range
-40°C
MIN
TYP
400
450
+25°C
MAX
MIN
TYP
400
450
+85°C
MAX
MIN
TYP
400
450
MAX
UNITS
MHz
VIN = 200MHz,
50% duty
cycle (Note 6)
30
70
28
60
28
60
ps
VIN = 400MHz,
50% duty
cycle (Note 7)
0.2
1.0
0.2
1.0
0.2
1.0
ps
(RMS)
190
ps
20% to 80%,
Figure 2
80
160
100
180
110
Note 1: Measurements are made with the device in thermal equilibrium.
Note 2: Current into a pin is defined as positive. Current out of a pin is defined as negative.
Note 3: DC parameters are production tested at +85°C. DC limits are guaranteed by design and characterization over the full operating temperature range.
Note 4: All pins open except VCC and VEE.
Note 5: Guaranteed by design and characterization. Limits are set to ±6 sigma.
Note 6: Phase offset is defined as the difference in propagation delay timing between the two input paths. It is measured between
the U and D outputs at the differential crosspoint with a rising edge simultaneously applied at the R and V inputs.
Note 7: Device jitter added to the input signal.
4
_______________________________________________________________________________________
ECL/PECL Phase-Frequency Detectors
MAX9382
TRANSITION TIME vs. TEMPERATURE
40.0
37.5
MAX9383
35.0
MAX9382/83 toc02
125
RISE TIME
100
200
175
TRANSITION TIME (ps)
TRANSITION TIME (ps)
MAX9382
FALL TIME
RISE TIME
150
125
75
FALL TIME
32.5
50
30.0
-15
10
35
100
-40
85
60
-15
10
35
60
85
-15
500
MAX9382
475
450
425
750
tPRU OR tPVD
725
PROPAGATION DELAY (ps)
525
35
60
80
PROPAGATION DELAY
vs. TEMPERATURE
MAX9382/83 toc04
550
10
TEMPERATURE (°C)
OUTPUT SHORT-PULSE DURATION
vs. TEMPERATURE
700
MAX9383
675
650
MAX9382
625
MAX9383
600
400
-15
10
35
60
-15
10
35
60
TEMPERATURE (°C)
TEMPERATURE (°C)
DIFFERENTIAL OUTPUT VOLTAGE
vs. FREQUENCY
OUTPUT PHASE ERROR
vs. INPUT PHASE DIFFERENCE
MAX9382/83 toc06
830
820
-40
80
MAX9383
810
MAX9382
800
790
50
OUTPUT PHASE ERROR (ps)
-40
85
MAX9382/83 toc07
OUTPUT SHORT-PULSE DURATION (ps)
-40
TEMPERATURE (°C)
TEMPERATURE (°C)
MAX9382/83 toc05
-40
DIFFERENTIAL OUTPUT VOLTAGE (V)
SUPPLY CURRENT (mA)
42.5
150
MAX9382/83 toc01
45.0
MAX9383
TRANSITION TIME vs. TEMPERATURE
MAX9382/83 toc03
SUPPLY CURRENT vs. TEMPERATURE
40
30
20
10
780
0
770
0
500
1000
FREQUENCY (MHz)
1500
2000
-4
-2
0
2
4
INPUT PHASE DIFFERENCE (ns)
_______________________________________________________________________________________
5
MAX9382/MAX9383
Typical Operating Characteristics
(VCC - VEE = +4.5V (MAX9382) or VCC - VEE = +5.2V (MAX9383), VIH = VCC - 1.00V, VIL = VCC - 1.60V, fR = fV = 100MHz, outputs
loaded with 50Ω to VCC - 2V, TA = +25°C, unless otherwise noted.)
ECL/PECL Phase-Frequency Detectors
MAX9382/MAX9383
Pin Description
PIN
NAME
FUNCTION
1
U
Inverting Up Output. Pulse stream is generated at this pin when fR > fV or V lags R in phase.
Terminate with 50Ω resistor to VCC - 2V or equivalent.
2
U
Noninverting Up Output. Pulse stream is generated at this pin when fR > fV or V lags R in phase.
Terminate with 50Ω resistor to VCC - 2V or equivalent.
3
D
Inverting Down Output. Pulse stream is generated at this pin when fV > fR or R lags V in phase.
Terminate with 50Ω resistor to VCC - 2V or equivalent.
4
D
Noninverting Down Output. Pulse stream is generated at this pin when fV > fR or R lags V in phase.
Terminate with 50Ω resistor to VCC - 2V or equivalent.
5
VEE
6
V
Single-Ended VCO Input
7
R
Single-Ended Reference Input
8
VCC
Negative Supply
Positive Supply. Bypass from VCC to VEE with 0.1µF and 0.01µF ceramic capacitors. Place the
capacitors as close to the device as possible with the smaller value capacitor closest to the device.
Detailed Description
The MAX9382/MAX9383 are high-speed phase or frequency detectors. The MAX9382 is compatible with 100K
logic and has a power-supply range of VCC - VEE = 4.2V
to 5.5V. The MAX9383 is compatible with 10H logic with a
power-supply range of VCC - VEE = 4.75V to 5.5V. Both
devices are specified to function from -40°C to +85°C.
Each device is symmetrical; the R and V input functions
may be swapped, together with the U and D output
functions, and the inputs and outputs relabeled.
Because of this device symmetry, a necessary condition for correct phase measurement operation is that
the U and D outputs must both be high (state 0 condition) when the rising edge of the leading input is
received. This condition is automatically generated
when the two inputs are at different frequencies.
Phase Detection
The MAX9382/MAX9383 are intended for use in highbandwidth PLL applications. These devices compare a
single-ended VCO input (V) to a single-ended reference input (R) to determine the phase or frequency
relationship between V and R. The device differential
outputs U, U and D, D provide pulse trains with duty
cycle proportional to the phase or frequency difference
between R and V. These outputs are the up and down
signals required to control the system VCO. Figure 1
shows typical waveforms when V leads R and V lags R.
Subtracting and integrating these two outputs provide
the necessary VCO control signal. Figure 3 shows the
device transfer function obtained. The detector can
6
detect phase differences up to ±2π. The application
frequency and the characteristics of the device internal
reset circuits determine the usable input phase difference range.
Frequency Detection
Figure 4 is the state diagram for the MAX9382/
MAX9383. With the two inputs at the same frequency,
and input R leading input V, the device toggles
between states 0 and 2. Similarly, if input R lags input
V, the device toggles between states 0 and 1. With the
two inputs at different frequencies, the output becomes
a function of the frequency difference. The normalized
ideal transfer function is given by:
VOUT _ AVE = 1-
fR
for fV > fR
2fV
VOUT _ AVE = 1-
fV
for fR > fV
2fR
and
Output Pulses
When inputs R and V are at the same phase and frequency, outputs U, U and D, D produce a stream of
minimum duration pulses that occur at the rising edges
of the input waveforms. This is the lock condition. If
either input starts to lead the other in phase, the width
of pulses on the corresponding output (U for R input, D
for V input) increases in proportion to the phase difference. In a PLL implementation, these outputs direct the
_______________________________________________________________________________________
ECL/PECL Phase-Frequency Detectors
MAX9382/MAX9383
R
V
U
U
D
D
tPRU
tPVU
tPmin
tPRD
tPmin
a) INPUT AND OUTPUT WAVEFORMS FOR V LEADING R
R
V
U
U
D
D
tPVD
b) INPUT AND OUTPUT WAVEFORMS FOR V LAGGING R
Figure 1. Typical Waveforms when fR = fV
system VCO to increase or decrease frequency to
maintain the lock condition.
The minimum output pulse duration is an important
parameter for the design of the signal processing functions, which follow the phase detector. When controlling
a charge-pump integrator, a detector can produce a
dead-zone characteristic at the lock condition if the
minimum pulse width is too short. MAX9382/MAX9383
eliminate this dead-zone characteristic, and the resulting phase offset at lock, by providing a well-defined
minimum output pulse width.
Applications Information
The MAX9382/MAX9383 input and output levels are
defined to be relative to the positive supply voltage. In
ECL systems, the positive supply voltage is conventionally chosen to be system ground. This arrangement
produces the best noise immunity, since ground is normally a system-wide reference voltage. Operate the
devices with VCC connected to ground and VEE connected to a negative supply for ECL systems. With
U-U
OR
D-D
80%
80%
20%
20%
tR
tF
Figure 2. Output Transition Times
PECL systems, connect VCC to a positive supply and
VEE to ground.
Power-Supply Bypassing
Adequate power-supply bypassing is necessary to
maximize the performance and noise immunity of ECL
devices. This is particularly true of a PECL system
where the power-supply voltage is used as a reference.
Bypass VCC to VEE with high-frequency surface-mount
ceramic 0.1µF and 0.01µF capacitors in parallel and as
close to the device as possible, with the 0.01µF capaci-
_______________________________________________________________________________________
7
MAX9382/MAX9383
ECL/PECL Phase-Frequency Detectors
Circuit Board Traces
fV > fR
OR
V LEADS R
fV < f R
OR
V LAGS R
Input and output trace characteristics affect the performance of ECL/PECL devices. Connect each of the
detector’s inputs and outputs to a 50Ω characteristic
impedance trace. Avoid impedance discontinuities,
maintain the distance between differential traces, avoid
sharp corners, and keep the electrical length of the differential traces matched. This maximizes commonmode noise rejection and reduces signal skew. Trace
vias cause impedance discontinuities, so keep the
number of vias in the 50Ω traces to a minimum. Reduce
reflections by maintaining the 50Ω characteristic
impedance through connectors and across cables.
VOH
AVG
(U)
VOL
VOH
AVG
(D)
VOL
VOH - VOL
AVG
(U - D)
-4π
0
-3π
-2π
-π
0
π
2π
3π
Output Termination
VOL - VOH
4π
Terminate outputs through 50Ω to VCC - 2V or use an
equivalent Thevenin termination. When a single-ended
signal is taken from a differential output, terminate both
outputs. For example, if the U output of the MAX9382 or
MAX9383 is connected to a single-ended input, terminate both the U and U outputs.
Figure 3. Average Output Voltage vs. Phase Difference
tor closest to the device pins. Use multiple parallel vias
for ground plane connection to minimize inductance.
Chip Information
TRANSISTOR COUNT: 706
PROCESS: Bipolar
R
STATE 2
R
U=0
D=1
V
STATE 0
VCO
UP
V
U=1
D=1
STATE 1
VCO
DOWN
U=1
D=0
V
R
Figure 4. MAX9382/MAX9383 State Diagram
8
_______________________________________________________________________________________
ECL/PECL Phase-Frequency Detectors
E
ÿ 0.50±0.1
8
INCHES
DIM
A
A1
A2
b
H
c
D
e
E
H
0.6±0.1
1
L
1
α
0.6±0.1
S
BOTTOM VIEW
D
MIN
0.002
0.030
MAX
0.043
0.006
0.037
0.014
0.010
0.007
0.005
0.120
0.116
0.0256 BSC
0.120
0.116
0.198
0.188
0.026
0.016
6∞
0∞
0.0207 BSC
8LUMAXD.EPS
4X S
8
MILLIMETERS
MAX
MIN
0.05
0.75
1.10
0.15
0.95
0.25
0.36
0.13
0.18
2.95
3.05
0.65 BSC
2.95
3.05
4.78
5.03
0.41
0.66
0∞
6∞
0.5250 BSC
TOP VIEW
A1
A2
A
α
c
e
b
FRONT VIEW
L
SIDE VIEW
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, 8L uMAX/uSOP
APPROVAL
DOCUMENT CONTROL NO.
21-0036
REV.
J
1
1
_______________________________________________________________________________________
9
MAX9382/MAX9383
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
DIM
A
A1
B
C
e
E
H
L
N
E
H
INCHES
MILLIMETERS
MAX
MIN
0.069
0.053
0.010
0.004
0.014
0.019
0.007
0.010
0.050 BSC
0.150
0.157
0.228
0.244
0.016
0.050
MAX
MIN
1.35
1.75
0.10
0.25
0.35
0.49
0.19
0.25
1.27 BSC
3.80
4.00
5.80
6.20
0.40
SOICN .EPS
MAX9382/MAX9383
ECL/PECL Phase-Frequency Detectors
1.27
VARIATIONS:
1
INCHES
TOP VIEW
DIM
D
D
D
MIN
0.189
0.337
0.386
MAX
0.197
0.344
0.394
MILLIMETERS
MIN
4.80
8.55
9.80
MAX
5.00
8.75
10.00
N MS012
8
AA
14
AB
16
AC
D
C
A
B
e
0∞-8∞
A1
L
FRONT VIEW
SIDE VIEW
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, .150" SOIC
APPROVAL
DOCUMENT CONTROL NO.
21-0041
REV.
B
1
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2002 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.