CGP20 and DGP20 Vishay Semiconductors New Product formerly General Semiconductor Miniature Clamper/Damper Glass Passivated Rectifier DO204AC (DO-15) Features 0.034 (0.86) 0.028 (0.71) Dia. 1.0 (25.4) min. • Specially designed for clamping circuits, horizontal deflection systems and damper applications • Plastic package has Underwriters Laboratory Flammability Classification 94V-0. • High temperature metallurgically bonded construction • Cavity-free glass passivated junction • 2.0 ampere operation at TA=50°C with no thermal runaway • Typical IR less than 0.1µA • Capable of meeting environmental standards of MIL-S-19500 • High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension * d e t n e t Pa 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) Dia. ® 1.0 (25.4) min. Mechanical Data Case: JEDEC DO-204AC, molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 oz., 0.4 g Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306. Maximum Ratings & Thermal Characteristics Parameter Reverse Voltage 1400 to 1500V Forward Current 2.0A Ratings at 25°C ambient temperature unless otherwise specified. Symbol CGP20 DGP20 Unit Maximum repetitive peak reverse voltage VRRM 1400 1500 V Maximum RMS voltage VRMS 980 1050 V Maximum DC blocking voltage VDC 1400 1500 V Maximum average forward rectified current 0.375” (9.5mm) lead length at TA = 50°C IF(AV) 2.0 A Peak forward surge current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) IFSM 40 A Maximum full load reverse current full cycle average 0.375” (9.5mm) lead length at TA = 100°C IR(AV) 200 µA Typical thermal resistance RΘJA 55 °C/W TJ, TSTG –65 to +175 °C (Note 1) Operating junction and storage temperature range Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Maximum instantaneous forward voltage at 2.0A CGP20 DGP20 Unit VF 1.1 V TA = 25°C TA = 100°C IR 5.0 100 µA Maximum reverse recovery time at IF = 0.5A, IR = 50mA trr Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A typical maximum Typical junction capacitance at 4.0V, 1MHz 15 20 µs trr 1.0 1.5 µs CJ 15 pF Notes: (1) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted Document Number 88568 03-Jan-03 www.vishay.com 1 CGP20 and DGP20 Vishay Semiconductors formerly General Semiconductor Fig.2 - Maximum Non-Repetitive Peak Forward Surge Current Fig.1 - Forward Current Derating Curve 2.0 50 Resistive or Inductive Load 1.5 0.375" (9.5mm) Lead Length Ipk/IAV = π 1.0 Capacitance Load Ipk/IAV = 5.0 10 20 0.5 Peak Forward Surge Current (A) Average Forward Rectified Current (A) Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) 0 8.3ms Single Half Sine-Wave (JEDEC Method) 40 TJ = 25°C No Load Condition 30 20 TJ = TJmax. 10 0 0 25 50 75 100 150 125 Ambient Temperature (°C) Number of Cycles at 60 Hz 10 TJ = 150°C 1 TJ = 25°C 0.1 Pulse Width = 300µs 1% Duty Cycle 0.01 0.6 0.8 1.0 1.2 Fig.4 - Typical Reverse Characteristics Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) Fig.3 - Typical Instantaneous Forward Characteristics 0.4 100 10 1 175 1.6 1.4 Instantaneous Forward Voltage (V) 10 TJ = 125°C 1 0.1 TJ = 25°C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.5 - Typical Junction Capacitance Junction Capacitance (pF) 30 TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 10 1 1 10 100 Reverse Voltage (V) www.vishay.com 2 Document Number 88568 03-Jan-03