PRELIMINARY SVR1038N, P, B, & A SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 10 Amps ADJUSTABLE LINEAR VOLTAGE REGULATOR Designer's Data Sheet Part Number /Ordering Information 1/ SVR1038 N DB H Screening 2/: _ = Not Screened H = High Rel Level K = Space Level R = Radiation Tolerant Lead Bend: 3/ _ = Straight DB = Down Bend UB = Up Bend Package: 4/ N = TO-254 P = TO-254Z B = MilPack II A = MilPack III FEATURES: • • • • • • • • • • MAXIMUM RATINGS Power Dissipation Input to Output Voltage Differential Operating Junction Temperature Control Section Power Transistor Storage Temperature TO-258 (N): TO-259 (P): NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 10A Output over 1.2 - 32V Voltage Range. Eutectic Die Attach Compatible with LM117 and LM138 Types Replaces LM396 Types Fast Switching Isolated Hermetically Sealed Power Package 150oC Operating Temperature Custom Lead Forming Available Ceramic Seal Package Available Class H or K (Space) Screening Available SYMBOL VALUE PD Internally Limited ªVIN/OUT 35 TJ -55 TO +150 -55 TO +200 o TSTG -65 TO +150 o MilPack II (B): MilPack III (A): DATA SHEET #: SVR0003A UNITS V C C PRELIMINARY SVR1086-2.85N, P, B, & A SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 Electrical Characteristics to SYMBOL MIN TYP MAX UNITS IOUT = 20mA 20mA # IOUT # 10A, 3V#ªV#35V, P#75W 25 * VREF 1.240 1.220 1.250 1.250 1.260 1.285 V V 3V #ªV # 35V, IOUT = 20mA 25 * ªVOUT ªVIN --- 0.005 0.02 0.010 0.03 %/V %/V 20mA # IOUT # 10A, 3V # ªV # 35V 25 * ªVOUT ªIOUT --- 0.1 0.3 4.00 8.00 % % Thermal Regulation 30 msec Pulse 25 -- .002 .005 %/W Ripple Rejection VOUT=10V, f=120Hz, COUT =25:F CADJ = 0 CADJ = 10:F * * -60 60 75 --- dB dB Reference Voltage 7/ Line Regulation Load Regulation 6/, (0 # IOUT #1.5A) 7/ * IADJ -- 50 100 :A 20mA # IOUT # 10A, 3V # ªV # 35V * ªIADJ -- 0.2 3 :A ªV = 35V ªV # 20V * * --- 7 20 10 mA mA ªV # 10VDC ªV # 10V (Transient) ªV = 30V * * 25 10 14 1 14 22 2 ---- A A A -- 1 2 % -- 0.3 1.0 % % Adjust Pin Current Adjust Pin Current Change Minimum Load Current Current Limit Temperature Stability ISC ªVOUT ªT ªVOUT ªVtime T = 1000 hrs 125 RMS Output Noice 10Hz # f # 10kHz 25 en -- 0.001 -- Thermal Resistance Junction to Case Power Transistor Control Circuitry * * R2JC --- --- 1.0 0.5 Long Term Strability NOTES: * Full Temperature Range 1/ For Ordering Information, Price, and Availability Contact Factory. o C/W C/W o PIN ASSIGNMENT FUNCTION PIN 1 PIN 2 PIN 3 Voltage Regulator Adjust Input Output 2/ Screening per MIL-PRF-19500. 3/ For Lead Bend Options Request Document # DSB-001 (Available for Download @ ssdi-power.com). 4/ For Package Outlines Request Document # DSA-001. (Available for Download @ ssdi-power.com) 6/ See Thermal Regulation specifications for changes in Output Voltage due to the heating effects. Line and Load Regulations are measured at a constant Junction Temperature by low duty cycle pulse testing. Load Regulation is measured at the Output Lead at approx. 1/8” from the package. 5/ Unless otherwise specified, these specifications apply: ªV = 5V and IOUT = 5A. These specifications are applicable for power dissipations up to 75W. At Input-Output voltage differentials greater than 10V, achievable output current and power dissipation decrease due to the protection circuitry. PRELIMINARY SVR1038N, P, B, & A SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 TO-258 (N): MilPack II (B): PIN 3 PIN 2 PIN 1 TO-259 (P) MilPack III (A): PIN 3 PIN 2 PIN 1