SVR137A Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1.5 AMP Negative Adjustable Linear Voltage Regulator Designer’s Data Sheet Part Number / Ordering Information 1/ 40 Volts SVR137A __ __ __ 2/ │ │ └ Screening │ │ __ = Not Screened TX = TX Level │ │ TXV = TXV │ │ S = S Level │ │ Lead Bend │ └ __ = Straight │ DB = Down Bend │ UB = Up Bend │ Package └ Features: • • • • • • • • • • M = TO-254 Z = TO-254Z J = TO-257 G = CerPack S.5= SMD.5 MAXIMUM RATINGS Guaranteed 0.02% line regulation Guaranteed 0.5% load regulation Min 1.5A output current Eutectic die attach Superior to LM137 types Complimentary use with LM117 types Isolated hermetically sealed power package (M,Z,J) 150°C operating temperature Custom lead forming available (M,Z,J) TX, TXV, and Space Level Screening Available Symbol Value Units PD Internally Limited, 20 W VIN/OUT 40 V IFSM 100 Amps TJ -55 to +150 o C -65 to +150 o C Power Dissipation3/ a Input to Output Voltage Differential Maximum Current Load Operating Junction Temperature Storage Temperature TO-254(M) T STG TO-254Z(Z) TO-257(J) CerPack (G) SMD.5 (S.5) Notes: 1/ For ordering information, price, operating curves, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. a 3/ Unless otherwise specified, these specifications apply: V = 5V and IOUT = 0.5A. Power dissipation is internally limited. However, these specifications apply for power dissipation up to 20W, IMAX = 1.5A. 4/ Testing is done using a pulsed low duty cycle technique. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: LA0011A DOC SVR137A Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS3/ Reference Voltage t° a V=5V, IOUT=10mA 10mA≤ IOUT≤IMAX, 3V≤ΔV≤40V, P≤PMAX Line Regulation4/ (3V≤ΔV≤40V) Load Regulation (10mA≤ IOUT≤IMAX) Thermal Regulation 20 msec Pulse Ripple Rejection CADJ = 0 CADJ = 10µF Adjust Pin Current Adjust Pin Current Change 10mA≤ IOUT≤IMAX, 3.0V≤ΔV≤40V Minimum Load Current Current Limit Temperature Stability VREF -1.225 -1.200 -1.250 -1.250 -1.275 -1.300 V ΔVOUT ΔVIN --- 0.01 0.02 0.02 0.05 %/V ΔVOUT ΔVIN --- 0.3 0.3 0.5 1.0 % % 25 -- .002 .02 %/W 25 25 -66 60 77 --- dB 25 * 25 * * IADJ -- 65 100 μA 25 Δ IADJ -- 2 5 μA -- 2.5 1.2 5.0 3.0 mA 1.5 0.24 2.2 0.4 - A -- 0.6 -- % -- 0.3 1.0 % en -- 0.003 -- % RθJC --- --- 4.0 2.5 °C/W 125 Long Term Stability (1000hrs) Junction to Case Unit * -55°C≤TJ≤+150°C Thermal Resistance Max * 25 ΔV≤15V ΔV≤40V (% of VOUT) Typ * ΔV≤40V ΔV≤10V RMS Output Noise Min 25 * 4/ VOUT = -10V, f = 120Hz Symbol 10Hz ≤ f ≤ 10kHz Package J, M, and Z Package G, S.5 25 IL ΔVOUT ΔT ΔVOUT ΔVtime Notes: *Full Temperature Range 1/ For ordering information, price, operating curves, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. a 3/ Unless otherwise specified, these specifications apply: V = 5V and IOUT = 0.5A. Power dissipation is internally limited. However, these specifications apply for power dissipation up to 20W, IMAX = 1.5A. 4/ Testing is done using a pulsed low duty cycle technique. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: LA0011A DOC SVR137A Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com TO-254Z (Z) TO-254 (M) TO-257 (J) CerPack (G) .105±.010 (.050) .010 ±.002 .020 .315 .370 .140 .210 1 2x .060 (.040) .340 .300 2 2x .100 SMD.5 (S.5) 3x .020 .010 2x .103 .087 .030 MIN .128 .112 .030 MIN .408 .392 PIN ASSIGNMENT Package Adjust Output Input TO-254 (M), TO254Z (Z), TO-257 (J), SMD.5 (S.5) Pin 1 Pin 2 Pin 3 Cerpack (G) Base Pin 1 Pin 2 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. .233 .217 2x .010 MAX .135 .115 DATA SHEET #: LA0011A .304 .288 DOC