160 MHz SAW Bandpass Filter 4 MHz bandwidth Part Number SF0160CD02254T Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE Horizontal: 2 MHz/div Vertical (from top): Magnitude Magnitude Phase Linearity 10 1 5 dB/div dB/div deg/div SPECIFICATION Parameter Center Frequency (Fc) 1 3 dB Bandwidth 40 dB Bandwidth Delay Input Power Insertion Loss Source and Load Impedance Phase Linearity 2 Passband Variation 2 Rejection (10 to 156 MHz) Rejection (156 to Fo-2.9 MHz) Rejection (Fo+2.9 to 164 MHz) Rejection (164 to 280 MHz) Operating Temperature Range Notes: Min 159.90 4.00 50 45 45 50 Typ 160.00 4.17 5.28 2.76 23.3 50 2.7 0.45 54 48 48 54 23 Max 160.10 5.80 Units MHz MHz MHz +10 25.0 µsec dBm dB 5 0.7 Ω deg p-p dB p-p dB dB dB dB °C 1. All specified bandwidths are centered at or referenced to this frequency. 2. Computed as the delta of the highest and lowest points inside the 3 dB Bandwidth. Rev X4 20-Apr-05 Page 1 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3 160 MHz SAW Bandpass Filter 4 MHz bandwidth Part Number SF0160CD02254T Integrated Circuit Systems, Inc. PACKAGE OUTLINE Units: mm Pin Configuration: Input: 1 Input Return: 14 Output: 7 Output Return: 8 Ground: 2, 9 MATCHING CIRCUIT Ls1 1 7 Ls2 Cp1 Cp2 14 Typical component values: Ls1 = 100 nH Cp1 = 33 pF 8 Ls2 = 100 nH Cp2 = 24 pF (Minimum inductor Q = 40) Notes • Maximum 2% tolerance matching components shall be used. • Tuning values shown are for reference only. Optimum values may change depending upon board layout. ISO 9001 Registered Rev X4 20-Apr-05 Page 2 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com QF12/3