Detector/Amplifier Hybrids Without Feedback Resistor SD 100-41-21-231 RED ENHANCED PACKAGE DIMENSIONS INCH 2 3 4 5 1 8 7 6 TO-5 PACKAGE CHIP DIMENSIONS DESCRIPTION APPLICATIONS The SD 100-42-21-231 is a red enhanced detector/amplifier that combines a silicon photodiode with an opamp without a feedback network, Packaged in a hermetic TO-5 metal can package. • Instrumentation • Industrial • Medical DETECTOR SPECTRAL RESPONSE AMPLIFIER SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED IS 1 2 mV 12 nV/√Hz 15 40 pA 20 30 fA/√Hz 18 Supply Current 6.5 MHz 7 mA °C °C TSTG Storage Temperature -65 +125 TO Operating Temperature -40 +85 0.60 0.50 0.40 0.30 0.20 0.10 0.00 Wavelength (nm) DETECTOR SPECIFICATIONS (TA)= 23°C UNLESS OTHERWISE NOTED SYMBOL ID RSH CJ lrange R CHARACTERISTIC Dark Current Shunt Resistance Junction Capacitance Spectral Application Range Responsivity TEST CONDITIONS VR = 10 V VR = 0 V VR = 0 V, f = 1 MHz VR = 10 V, f = 1 MHz Spot Scan l= 950 nm, VR = 0 V MIN TYP MAX 10 300 87 18 250 pF 1100 0.64 UNITS nA MW nm A/W 1200 GBP V 1100 In ± 18 1000 Iib ± 15 900 Vn ±5 0.70 800 Input Offset Voltage Input Voltage Noise @ f = 10KHz Input Bias Current Input Current Noise @ f = 10KHz Gain Bandwidth Product UNITS 700 Vio MAX 600 Voltage Supplies TYP 500 Vs MIN Responsivity (A/W) SYMBOL PARAMETER 400 Low noise Red enhanced Custom feedback High speed 300 • • • • 200 FEATURES Detector/Amplifier Hybrids Without Feedback Resistor SD 100-41-21-231 SCHEMATIC AND CONNECTION DIAGRAM 7 7 μ 2 μ 2 6 8 3 4 1 5 μ Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 6 8 3 4 1 5 μ Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 2