Detector/Amplifier Hybrids With Feedback Resistor SD 112-45-11-221 PACKAGE DIMENSIONS INCH 2 1 3 4 TO-5 PACKAGE See Sheet 2 for Schematic and connection Diagram CHIP DIMENSIONS DESCRIPTION APPLICATIONS The SD 112-45-11-221 is a detector/amplifier hybrid that combines a silicon photodiode with an opamp with a feedback resistor and capacitor, available in a hermetic TO-5 metal can package. • Instrumentation • Industrial • Medical SPECTRAL SENSITIVITY ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED +240 °C °C 200 150 100 50 * 1/16 inch from case for 3 seconds max. 0 Wavelength (nm) ELECTRO-OPTICAL CHARACTERISTICS RATING SYMBOL f3db Gain S Vos Is Vn NEP IS VOSW CHARACTERISTIC Cutoff Frequency Transimpedance Gain Sensitivity Output Offset Voltage Power Supply Current Broadband Noise Noise Equivalent Power Supply Current Output Voltage Swing (TA)= 23°C, VS = ± 5V, RL > 1MW, UNLESS OTHERWISE NOTED TEST CONDITIONS l= 633 nm f= 0.01Hz to 135 Hz f= 0.01Hz to 135 Hz MIN 2.8x108 TYP 0.13 600 2.4x108 0.08 0.8 MAX ±1 0.9 52 3.5x10-14 850 950 0 to 4.7 0 to 4.7 UNITS KHz MW V/W mV mA uVrms W/√Hz uA V Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com 1200 +100 250 1100 Soldering Temperature* -25 mW 300 1000 TS 360 350 900 Storage Temperature V 800 TSTG ± 15 700 Power Dissipation UNITS 300 P ±5 MAX 200 Voltage Supplies TYP 6 Vs MIN Sensitivity (10 V/W) SYMBOL PARAMETER 400 600 Low noise Blue enhanced Feedback circuit High speed 500 • • • • 400 FEATURES Detector/Amplifier Hybrids With Feedback Resistor SD 112-45-11-221 SCHEMATIC AND CONNECTION DIAGRAM 3 0.01 μF 4 1 2 0.01 μF Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 2