SENSITRON SEMICONDUCTOR SCP-6122 TECHNICAL DATA DATA SHEET SCP-6122, PRELIMINARY RELEASE POWER OPERATIONAL AMPLIFIER Sdh +Vb +Vs -Ilim +Ilim + +In Out - -In C2 C1 Gnd -Vs -Vb Sdl FEATURES: • • • • • • • • • • 100V OPERATION 30A CONTINUOUS CURRENT 150V/µs SLEW RATE JFET INPUTS EXTERNAL SHUTDOWN WITH LOGIC LOW OR LOGIC HIGH OPERATION BOOST INPUTS FOR MORE EFFICIENT POWER USAGE ADJUSTABLE CURRENT LIMIT COPPER-BASE INSULATED METAL SUBSTRATE FOR HIGH THERMAL TRANSFER FLEXIBLE HEATSINK CONFIGURATIONS LOW QUIESCENT CURRENT APPLICATIONS: • • • • LINEAR MOTOR OPERATION PIEZO/ULTRASOUND TRANSDUCER DRIVING AUDIO MAGNETIC FIELD EXCITATION • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - [email protected] • Page 1 SENSITRON SEMICONDUCTOR SCP-6122 TECHNICAL DATA DATA SHEET SCP-6122, PRELIMINARY RELEASE ABSOLUTE MAXIMUM RATINGS TC=25 oC UNLESS OTHERWISE NOTED RATING SUPPLY VOLTAGE, +Vs TO –Vs BOOST VOLTAGE CONTINUOUS OUTPUT CURRENT INTERNAL POWER DISSIPATION COMMON MODE INPUT VOLTAGE DIFFERENTIAL MODE INPUT VOLTAGE JUNCTION TEMPERATURE STORAGE TEMPERATURE OPERATING CASE TEMPERATURE MAXIMUM 100V Vs ± 17V 30A (SEE SOA CURVE) 200W +Vb TO –Vb ±25V 1750C -400C TO 1250C -400C TO 1000C ELECTRICAL CHARACTERISTICS TC=25 oC UNLESS OTHERWISE NOTED C = 100pF UNLESS OTHERWISE NOTED RAILS ARE ± 45V UNLESS OTHERWISE NOTED CHARACTERISTIC SYM CONDITIONS INPUT OFFSET VOLTAGE Vio INPUT OFFSET CURRENT Iio INPUT BIAS CURRENT Iib COMMON MODE REJECTION RATIO CMRR GAIN BANDWIDTH PRODUCT GBW C = 33pF PHASE MARGIN φm VOLTAGE SWING, NOT BOOSTED Vom VOLTAGE SWING, BOOSTED Vomb SLEW RATE SR C = 33pF POWER BANDWIDTH PBW QUIESCENT CURRENT Icc QUIESCENT CURRENT, BOOST PINS Iccb MIN TYP 0.5 2 10 MAX 102 11.5 45 |Vs|-8.5V |Vs|-1.7V 120 150 600 45 40 • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - [email protected] • Page 2 UNITS mV pA pA dB MHz DEG V/µs kHz mA mA SENSITRON SEMICONDUCTOR SCP-6122 TECHNICAL DATA DATA SHEET SCP-6122, PRELIMINARY RELEASE CURRENT LIMITING If curent limiting is not used, both current limit pins, +Ilim and –Ilim, must be connected to the output. To limit current, place a resistor of the value 0.734/Ilim in series with the output as shown below. Sdh +Vb +Vs -Ilim +Ilim +In + Out R = 0.734 Ilim -In C2 C1 Gnd -Vs -Vb Sdl COMPENSATION Connect a 100V, NPO capacitor between C1 and C2. For stability, the minimum capacitor value is generally 33pF. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - [email protected] • Page 3 SENSITRON SEMICONDUCTOR SCP-6122 TECHNICAL DATA DATA SHEET SCP-6122, PRELIMINARY RELEASE PINOUT PIN 1 2 3 4 5 6 7 8 9 10 11 12 13-18 19-30 31-36 FUNCTION BASE CC2 CC1 -ILM +ILM -IN +IN -VB +VB GND SD HIGH SD LOW -VS OUT +VS SAFE OPERATING AREA SAFE OPERATING AREA OUTPUT CURRENT (A) 100 10 1 1 10 100 (Vs-Vo) (V) DC, Tc=100C DC, Tc=85C DC, Tc=25C • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - [email protected] • Page 4 SENSITRON SEMICONDUCTOR SCP-6122 TECHNICAL DATA DATA SHEET SCP-6122, PRELIMINARY RELEASE DIMENSIONS DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - [email protected] • Page 5